loading

PPE Testing Equipment Manufacturer | Safety Equipment Testing Machines | GESTER


Products

A Brief Introduction to the Determination of Random Pilling Properties of GB Fabrics

1. Reference standard: GB/T 4802.4 Determination of the pilling and pilling properties of fabrics Part 4: Random tumbling method There are four methods to test the pilling performance of fabrics, including the alpha method, the pilling box method and the random tumbling method.) 

2. Test apparatus: random tumbling pilling tester 

3. Test principle: put the sample into the test box, Under the rotation of the impeller, the cork lining of the storage box rubs continuously and randomly. After the set time is reached, the sample is taken out for rating. 

4. Main instruments and appliances: 

1. Pilling box 

2. Cork cylinder liner: Length 452mm, width 146mm, thickness 1.5mm. Cork pads need to be replaced after 1 hour of use. 

3. Air compression device: make the test chamber reach a certain pressure (14-21KPa). 

4. Adhesive, gray short cotton. 

5. Rating box: illuminated with white fluorescent tubes or bulbs. The position of the light source is kept with the plane of the sample 5°—15°, the observation direction is kept 90° from the sample plane°±10°. The distance between the eye with normal vision and the specimen should be 30cm—50cm. V. Preparation of samples: 

(1) Pretreatment: If pretreatment is required, the samples can be washed or dry cleaned by the method agreed by both parties. 

(2) Take 3 samples from the fabric sample, the size is (105±2) mm*(105±2) mm, and cut another cloth sample of the same size as a comparison sample for rating. The specimens were marked and the edges of the specimens were sealed with adhesive and hung to dry. 


6. Test steps: 

1). Put 3 samples from the same sample into different test chambers for testing. 

2). Put the gray cotton wool together with the sample into the test chamber (weight 25mg, length 6mm) 

3). Set the test time to 30min, start the instrument, and open the airflow valve. 

4). After the test, take samples for rating, and use a vacuum cleaner to remove the remaining cotton wool. 


7. Rating of test results: The rating box should be placed in a dark room. Place the tested sample and an untested sample side by side in the middle of the test panel of the rating box in the longitudinal direction of the fabric (if the test sample is pre-treated before testing, the control sample should also be pre-treated. pretreatment, the reference sample shall be the unpretreated sample). Put the tested sample on the left and the untested sample on the right. Ratings are subjective and at least 2 ratings are recommended. The appearance of the samples and the corresponding grades are as follows: record the grades of each sample, and the rating result of a single person is the average value of the grades for all the samples. The test result of the sample is the average value of the ratings of all personnel. If the average value is not an integer, it should be corrected to the nearest 0.5 level and used“—”means, such as 3—4. If a single test result differs from the average by more than half a class, the class number for each specimen shall be reported at the same time. More about the Random Pilling Tester: https://www.gesterinstruments.com/4-test-chambers-random-tumble-pilling-tester-gt-c19b



Everyone who has a tensile tester manufacturers wants it to look tensile tester manufacturers. However, in order to achieve that, it normally involves investing in a tensile tester manufacturers textile testing equipment. GESTER International Co.,Limited can offer you the best solution.

The best way to confront your tensile tester manufacturers problem is to search for a high quality offered by GESTER International Co.,Limited at GESTER Instruments. Take a look!

GESTER International Co.,Limited have significantly changed the way customers approach manufacturing. textile testing equipment can still compete if we are willing to change the ways in produ


GET IN TOUCH WITH Us
recommended articles
 Fabric Pilling Test: How to Choose the Right ICI Pilling Box Tester GT-C18
Fabric pilling directly affects the appearance, durability, and perceived quality of textile products. With global textile brands enforcing stricter testing standards, reliable laboratory testing equipment has become essential for manufacturers. This article explores how fabric pilling tests are conducted and why textile laboratories increasingly invest in professional ICI pilling box testers such as the GT-C18. It explains the advantages of in-house testing, international compliance requirements, key machine components, and important parameters buyers should evaluate before purchasing a pilling tester. By selecting the right equipment, textile companies can achieve faster quality verification, reduce dependence on third-party laboratories, and ensure their fabrics consistently meet international market standards.
First, the mechanism of pilling The so-called fabric pilling refers to the formation of hair on the surface of the fabric by one or several fibers, and then entangled with each other in a spherical state.
As we all know, the fabric is constantly subjected to various external forces during the wearing process, and the continuous action of external friction makes the plush entangle into a ball and bulge on the surface of the fabric.
The ICI pilling tester is suitable for detecting the pilling and pilling phenomenon caused by friction on the surface of the fabric without pressure.
Abrasion is manifested in the morphological changes of the fabric, which are mainly damage, loss of quality, discoloration in appearance, pilling and other changes.
The circular track method pilling testing-equipment' target='_blank'>tester uses linear guides as sliding gauges to test the pilling conditions of wool fabrics, chemical fiber pure cotton, blended, knitted and woven fabrics to identify product quality and process effects, (Hong Kong) Co., Ltd.
The box-type pilling tester is used for pilling or snagging caused by normal wear and tear.
In the textile industry, the Martindale and Valspar test evaluation methods are two methods to measure the abrasion resistance of fabrics.
GESTER International Co., Ltd. gains certificates of ISO 9001, 3A and SGS Audited supplier etc. with advanced design concept, excellent manufacturing technology and strict quality control.
WeChat
Contact us
Tel: +86-595-28886108 
Fax: +86-595-22515221
E-mail: sales10@gester-instruments.com,
                 info@gester-instruments.com
Mobile/Whatapp/ Wechat:  
             + 86(0)18059983973
Address:  No.15, Chifeng Road,Licheng Region, Quanzhou city of Fujian,PR China.
Customer service