loading

PPE Testing Equipment Manufacturer | Safety Equipment Testing Machines | GESTER


Products

AATCC 135 fabric shrinkage test process and rating reference1

Scope of application: This test method is used for dimensional changes in woven and knitted fabrics after multiple home launderings. 

Test principle: The dimensional change of the cloth box is calculated by the difference between the standard length delineated on the cloth box before washing in a representative household washing and drying process. 

Test equipment: Wascator Automatic Shrinkage Tester For Fabric GT-D34 , Medicines: WOB washing powder 92g, total laundry weight: 1.8kg, weighted cloth: 92X2300px, white bleached cotton cloth, overlock. Sampling: Use the AATCC sampling ruler to cut the sample 50 X1250px, take 35 X875px (35 is the smallest, or it can be larger) on each side to mark three pairs, at least 3 samples. AATCC Shrinkage Washing Machine Technical Parameters: Standard: AATCC 88B, AATCC 88C, AATCC 124, AATCC 130, AATCC 135, AATCC 142, AATCC 143, AATCC 150, AATCC 159, AATCC 172, AATCC 179, AATCC 188 

Test steps: 

1) Sampling , Weighing, if it is less than 1.8kg, use a weighted cloth to make up. 

2) Set the water level. Medium is generally used, and if the customer has special requirements, it will be based on the customer's requirements. 

3) Set the water temperature. Generally washed with warm water and rinsed in cold water, or according to customer requirements. The water heater can adjust the water temperature. 

4) Set the laundry program. Generally use Regular or according to customer requirements. 

5) Take 92g of WOB washing powder, dissolve it in an appropriate amount of warm water and pour it into the washing machine. 

6) Put the test sample and weighted cloth into the washing machine. 

7) Start up and run, and take it out after the end. 

8) Take out the test sample and weighting cloth and put it in the dryer. 

9) Set the appropriate drying program and temperature, and start running. 

10) After the operation, take out the test sample and weighted cloth, put it back into the washing machine, and carry out the experiment according to steps 2) to 9). 

11) As mentioned above, carry out at least three cycles of washing and drying. 

12) The dried samples are placed in the conditioning chamber for at least 4 hours, then the dimensional changes are measured and recorded. Test report: 1) Percentage of dimensional change in the length direction, take the average value of each measurement. 2) The percentage of dimensional change in the width direction, take the average value of each measurement. 3) Describe the laundry conditions used, including water level, water temperature, and washing program. 4) State the drying conditions used, including drying program and temperature. 5) Describe the change in appearance of the test sample after washing.


Wascator Automatic Shrinkage Tester For Fabric GT-D34


Automatic Wascator Shrinkage Tester Application

Wascator Automatic Shrinkage Tester accelerated washing apparatus for knitted and woven fabrics to assess shrinkage in accordance with international test methods. Also used for assessing fabric stability, color fastness, finish durability, spirality and pilling to washing.


Feature

1. Automatic Wascator Shrinkage Tester MCU program controller, build-in ten sets of washing program that ISO required, and operator program capability.

2. No need to fix to ground with foot screw, operating stably;

Soft link between rotating cage and rack, low vibration and noise;

Variable frequency motor, switch smoothly between high speed and low speed, low temperature increment of motor.

3. Blue fluorescence LCD display, test state dynamic icon shows, easier to catch the eye and operation convenience.

4. Non-touch capacitance water level meter to measure water level accuracy and reliable


Shrinkage Tester For Fabric Standards

GB/T8629, GB/T8630, ISO6330/5077, FZ/T70009, BS4923, EN25077/26330, JIS L1909, IWSTM31,ISO19954,

SATRA TM158


GESTER International Co.,Limited is recognized as one of the leading manufacturer of in China.Trust in us and make GESTER International Co.,Limited your textile testing equipment supplier. Our products will bring more economic value to you.

So, get ready to dazzle the world with Wascator Automatic Shrinkage Tester For Fabric GT-D34! Buy one today!! Visit GESTER International Co.,Limited at GESTER Instruments.

GESTER Instruments is one of the top brands in their class when it comes to textile testing equipment and tensile tester manufacturers. If you check online, GESTER Instruments is often rated high and reviewed with much praise. we would be very pleased to receive your inquiry.

GESTER International Co.,Limited can assure you that we never compromise on our quality standards and are one of the best in the market at present.


GET IN TOUCH WITH Us
recommended articles
How to Know the Fabric Shrinkage Test for Your Projects
Master fabric shrinkage testing with this definitive guide. Understand causes of shrinkage, industry standards (ISO, GB, AATCC), step-by-step testing methods using Wascator equipment, and strategies to minimize shrinkage for superior garment quality and customer satisfaction.
Safety Footwear Test Guide ISO 20344 with Buying Tips
ISO 20344 provides standardized test methods for evaluating the safety and performance of protective footwear. This guide covers the main ISO 20344 footwear testing methods, including impact resistance, compression resistance, puncture resistance, slip resistance, sole flexing, abrasion, water resistance, electrical resistance, and thermal insulation. It also introduces common safety footwear testing equipment and explains how these machines are used in footwear manufacturing plants, PPE testing laboratories, third-party testing facilities, and quality-control departments. In addition, the article provides practical buying tips covering standard compliance, test capacity, software and data management, calibration, after-sales service, maintenance, and total cost of ownership. The guide is designed to help footwear manufacturers and testing laboratories select reliable equipment for accurate, repeatable, and efficient safety footwear compliance testing.
Universal Testing Machine Dual Column GT-K01: A Reliable Solution for footwear Testing
The Universal Testing Machine Dual Column GT-K01 is a high-precision mechanical testing instrument widely used in the footwear industry to evaluate tensile, compression, bending, tearing, and bonding strength of various materials. With advanced servo control, high-accuracy displacement measurement, and compliance with multiple international testing standards such as SATRA, ASTM, ISO, and BS, the GT-K01 footwear universal testing machine provides reliable data for quality control, material research, and product certification. This article explores the working capabilities, structural features, and practical value of the GT-K01 universal testing machine in footwear testing and manufacturing processes.
PPE Trends: Insights from a China Top PPE Testing Machine Company
As 2026 approaches, the global PPE industry is transformed by stricter industrial safety regulations, healthcare awareness, and evolving international standards (ISO/ASTM/EN). Key trends include the rise of Smart PPE, adoption of sustainable bio-based materials, and converging global compliance requirements—demanding high-precision, automated testing equipment with data traceability. GESTER International Co., Ltd., a China top PPE testing machine company with 25+ years of expertise, addresses these challenges through modular, standards-aligned solutions (e.g., TPP Thermal Protection Tester GT-RC02A, TDM Cut Test Machine GT-KC28) and long-term partnerships with SGS, TUV, and Intertek. Offering global technical support (installation, calibration, training) and automated, multi-standard-compatible equipment, GESTER empowers PPE manufacturers to meet 2026’s rigorous safety benchmarks. This article explores PPE performance evolution, 2026 industry trends, technological testing responses, and strategic procurement tips—emphasizing how China’s leading testing machine providers bridge hardware innovation with global compliance to protect human life. For professional PPE testing solutions, visit https://www.gesterinstruments.com/.
What is the Safety Footwear Impact Tester & Why are They Important in Safety Shoes Testing
A Safety Footwear Impact Tester evaluates the impact resistance of safety shoes by striking the steel toe cap with 100J/200J kinetic energy, ensuring compliance with global standards (EN ISO 20344, ASTM F2412). It’s critical for verifying product protection, facilitating certification, and optimizing safety shoe design. GESTER Instruments offers reliable, user-friendly testers trusted by manufacturers and labs worldwide.
DIN Abrasion Tester vs Taber Abraser: What Is the Difference?

Choosing the right abrasion testing equipment is essential for obtaining accurate and repeatable wear resistance results. DIN Abrasion Tester and Taber Abrasion Tester are two widely used abrasion testing machines, but they are designed for different material types and testing purposes.

This article provides a detailed comparison between DIN Abrasion Tester and Taber Abraser, covering their working principles, specimen requirements, industry applications, standard compliance, technical characteristics, operation features and practical advantages. DIN Abrasion Tester is mainly designed for rubber, elastic materials, tires, conveyor belts and footwear soles, while Taber Abrasion Tester is suitable for flat materials such as coatings, textiles, plastics, leather, metals and decorative surfaces.

By understanding the differences between these two abrasion testing methods, laboratories can select the most suitable abrasion tester based on sample geometry, testing standards and production quality control requirements.
ISO 20345 vs ASTM F2413: Differences Between Safety Footwear Standards
ISO 20345 and ASTM F2413 are the two most recognized safety footwear standards used worldwide to evaluate protective footwear performance. Although both standards define minimum requirements for impact resistance and compression protection, differences in test energy levels, compression loads, marking systems, and hazard classifications can affect certification results. This article explains the key differences between ISO 20345 and ASTM F2413, helping footwear manufacturers, exporters, and quality control teams select the correct testing standard and improve compliance with international safety requirements.
What is EN 149 & Why is it Important?
EN 149 is the core European standard for particle-filtering half masks and FFP respirators. This article elaborates on the definition, structure, performance classification, marking rules and core advantages of EN 149, compares it with NIOSH N95, KN95, EN 143 and medical mask standards, and lists industry application scenarios, as well as professional mask and filter testing instruments compliant with EN 149 testing requirements.
Safety Footwear Tester Guide ISO 20346 with Buying Tips
This guide explains the ISO 20346 standard for general-purpose protective footwear, differentiates it from related ISO standards, and shares core buying tips for qualified safety footwear testers. It also introduces professional multi-standard compliant testing equipment for footwear quality control and compliance verification.
How to Find a Professional Safety Glove Testing Machine Manufacturer with CE Certification?
With the global PPE market’s rapid growth, choosing a professional CE-certified safety glove testing machine manufacturer is critical for data integrity and international compliance. This article explains why CE certification is non-negotiable (ensuring EU safety/quality standards), outlines essential test items (abrasion, cut, thermal protection per EN 388/EN 407), highlights core instruments (GESTER GT-KC28 TDM Cut Tester, GT-KC29 Cutting Tester, GT-C101 Heat Contact Machine), and details how to evaluate suppliers (20+ years of experience, partnerships with SGS/Bureau Veritas, ISO 9001 certification, after-sales support). It also covers the benefits of OEM/ODM capabilities for customized solutions. Ultimately, partnering with trusted manufacturers like GESTER ensures high-precision, compliant testing to protect workers and meet global market requirements.
GESTER International Co., Ltd. gains certificates of ISO 9001, 3A and SGS Audited supplier etc. with advanced design concept, excellent manufacturing technology and strict quality control.
WeChat
Contact us
Tel: +86-595-28886108 
Fax: +86-595-22515221
E-mail: sales10@gester-instruments.com,
                 info@gester-instruments.com
Mobile/Whatapp/ Wechat:  
             + 86(0)18059983973
Address:  No.15, Chifeng Road,Licheng Region, Quanzhou city of Fujian,PR China.
Customer service
detect