American Standard washing machine usage, precautions and maintenance
2022-07-26
Gester Instruments
279
American Standard washing machine usage and precautions: 1. Classify the fabrics before washing to avoid affecting the test results 2. Add detergent to the bottom of the enamel liner (select different detergent types and dosages according to different test standards) 3. Add test fabrics (Remember not to exceed the maximum load) 4. Select the program (please choose different test programs according to different test standards) 5. Select the load (small, medium, large, super large four options) 6. Select the washing temperature (different samples Type to choose different washing temperature, please refer to the corresponding AATCC standard test method for details) 7. Press the Start knob to start the washing process. (Because the system automatically checks the load balance, there will be a 2-3 minute delay in water injection, which is normal) American Standard washing machine maintenance: 1. Regularly replace the water inlet pipe 2. Select the appropriate amount of detergent according to the standard, do not use excessive detergent 3. Appropriately use warm water and hot water, not only cold water 4. Keep the lid open between uses to keep the washing machine dry inside and outside 5. Please clean the washing machine after use to extend its service life Article Source: (Hong Kong) Co., Ltd.
GESTER International Co.,Limited has an array of branches in domestic for munufacturing textile testing equipment.
GESTER International Co.,Limited’s sole aim is to provide exquisite and unheard of features to the concept of producing technology.
textile testing equipment has its grasp on oversees market and has a very good repute. Our products are available at very competitive prices.
GET IN TOUCH WITH Us
recommended articles
This article comprehensively introduces mask testing equipment, including its definition, application significance, core international testing standards, main equipment types and functional characteristics. It also puts forward a step-by-step selection guide and common selection misunderstandings, providing a reference for mask manufacturers, third-party testing institutions and regulatory departments to select appropriate testing equipment, so as to ensure mask product quality, pass international certification and protect user safety.
The ASTM D642 standard defines the test method for determining the compressive resistance of shipping containers, like corrugated boxes, when faced with static compressive forces. This article details the test procedure and introduces the GESTER GT-N02A and GT-N02B Box Compression Testers, which are fully compliant with ASTM D642, ISO 12048, and TAPPI T804. These versatile machines perform destructive strength tests, constant value tests, and simulated long-term stacking tests to ensure your pac
This article fully explains the working principle, applicable international standards, test advantages and application scope of safety footwear compression and puncture tester GT-KB12A. It covers core protective performance testing of safety shoe toecap and sole steel plate, complies with GB, ISO, EN, ASTM and other global standards, and serves manufacturers, third-party labs and safety footwear R&D institutions for quality control .
Cut resistance is one of the most critical performance indicators in personal protective equipment (PPE) testing, directly affecting worker safety in high-risk industries such as metal processing, machinery manufacturing, and emergency rescue. The TDM Cut Test Machine GT-KC28 plays a vital role in accurately evaluating the cut resistance of PPE products, including gloves, protective clothing, footwear materials, composite materials, rubber, and industrial textiles.
By adopting high-precision force control systems, intelligent data processing, and stable transmission technology, the GT-KC28 TDM Cut Tester can accurately measure the critical cutting force of materials and ensure excellent repeatability and comparability of test results. Its user-friendly touch-screen operation, comprehensive data storage, USB data export, and built-in thermal printer greatly improve laboratory efficiency and data traceability.
The TDM Cut Test Machine GT-KC28 fully complies with major international and national standards such as ISO 13997, EN 388, ASTM F2992/F2992M, ANSI/ISEA 105, and GB 24541-2022, making it a reliable solution for PPE manufacturers, third-party testing laboratories, and research institutions. Through precise and standardized cut resistance testing, the GT-KC28 helps reduce industrial cutting injuries, supports PPE certification across global markets, and ensures that protective equipment delivers reliable safety performance in real-world applications.
Our expert team provides comprehensive on-site installation and training for the Incline Impact Tester GT-N49. This critical packaging testing equipment simulates real-world impacts during handling, transport, and stacking to evaluate product damage resistance. Learn about its key features like flexible moving plates, height adjustment, pneumatic angle control, and remote operation safety. Our service ensures proper setup, operational mastery, maintenance guidance, and troubleshooting support fo
As global industrial safety requirements tighten, GESTER International Co., Ltd has emerged as a globally recognized top safety shoe tester exporter, serving 168 countries with over 25 years of specialized expertise. The company’s success hinges on its commitment to precision engineering, compliance with international standards (ISO, ASTM, EN, SATRA), and partnerships with renowned testing institutes like SGS, Intertek, and TUV. Its product lineup, including the Safety Glove & Shoe Upper Cutting Tester GT-KC29 and cut resistance testers, delivers reliable, repeatable data for safety footwear durability, cut resistance, and other critical performance indicators. Complemented by a comprehensive global service network (on-site installation, calibration, staff training) and OEM/ODM customization capabilities, GESTER streamlines quality control for manufacturers, facilitating market access and ensuring workplace safety. Trusted by PPE brands and laboratories worldwide, GESTER bridges technical excellence and practical usability to drive efficiency in safety shoe certification and global trade.
The Cobb Test Paper Absorption Tester GT-N07 is an essential instrument for evaluating the water absorption properties of paper and paperboard materials. This test, commonly known as the Cobb method, helps determine how much water paper can absorb over a specified time under controlled conditions—crucial for assessing its suitability in printing, packaging, and coating applications.
A Safety Footwear Impact Tester evaluates the impact resistance of safety shoes by striking the steel toe cap with 100J/200J kinetic energy, ensuring compliance with global standards (EN ISO 20344, ASTM F2412). It’s critical for verifying product protection, facilitating certification, and optimizing safety shoe design. GESTER Instruments offers reliable, user-friendly testers trusted by manufacturers and labs worldwide.
Discover how universal testing machines perform tensile, compression, bending, and peel tests on metals, plastics, rubber, and composites. Features include servo motors, 0.001mm resolution, RS232 data, and safety systems. Step-by-step operation guide included.
EN ISO 20344 is the core international test method standard for full-performance detection of safety footwear. This article systematically explains the full range of whole-shoe test items covered by the ISO 20344 standard, analyzes the core practical advantages of mandatory ISO 20344 testing for factories and laboratories, and matches a complete set of dedicated ISO 20344 testers one by one. It also sorts out mainstream associated safety footwear standards worldwide, providing one-stop standardized testing solutions for safety footwear manufacturers, third-party testing institutions and occupational safety supervision departments.
no data
Quanzhou Gester International Co.,Ltd gains certificates of ISO 9001, 3A and SGS Audited supplier etc. with advanced design concept, excellent manufacturing technology and strict quality control.
WeChat
Quick links
Products
Contact us
Mobile/Whatapp/ Wechat:
+ 86（0）18059985379
Address: Block 402,4th floor, f buliding, shengfulan business Center, no.577 jitai road, economic and Technological development zone quanzhou of fujian.China.
Friendly Links: Physial Testing Instruments And Equipments