Analysis of requirements for surface burning test of carpets and cushions (16 CFR 1630)
16 CFR 1630 is a standard test for the surface burning of carpets and mats. This standard provides a test method for determining the flammability of carpets and mats under the conditions of designated small fire sources. 1. Definition and Scope 16 CFR 1630 is applicable to carpets used in homes, offices or hotels that are not adhered by mechanical methods (such as nails, etc.), with a unidirectional size greater than 1.83 m and a surface area greater than 2.23 m2. 16 CFR 1631 is applicable to carpets used in homes, offices or hotels that are not adhered by mechanical methods (such as nails, etc.), with one-way dimensions not greater than 1.83 m and surface areas not greater than 2.23 m2. 2. Combustion performance requirements The two standards stipulate that if the size of the scorched part of the sample is within the range of 2.54 cm (1.0 in), then this single sample meets the requirements. Among the 8 given samples, if at least 7 samples meet the standard requirements, the carpet is considered qualified. The standard also stipulates that the sample size is 22.86×22.86 cm2 (9×9 in.2), and 8 samples need to be subjected to the combustion performance test after humidity control. The test report must be given to the retailer or distributor. There should be a test report for each carpet with a length of 22860 m, and an additional report for every 45720 m increase in length. If the carpet has undergone flame-retardant treatment, or contains flame-retardant treated fibers, 'T' should be marked on the carpet. For 16 CFR 1631 medium and small carpets, if they do not meet the flammability requirements, the following information must be permanently marked on the product before it can be sold: FLAMMABLE (FAILS US DEPARTMENT OF COMMERCE STANDARD FF 2-70): SHOULD NOT BE USED NEAR SOURCES OF IGNITION.3. Recall of substandard products: The Consumer Product Safety Commission requires the recall of products that do not comply with the Flammable Fabric Act (FFA). Substandard products can be recalled from distributors, retailers and final consumers. 16 CFR 1630 related standards: 16 CFR 1631 Standard test for the surface flammability of carpets and cushions 16 CFR 1631 (FF 1-70) STANDARD FOR THE SURFACE FLAMMABILITY OF Small CARPETS AND RUGS
have manifold textile testing equipment effects, ranging from tensile tester manufacturers to tensile tester manufacturers.
Our vision serves as the framework for our textile testing equipment and guides every aspect of our business by describing what we need to accomplish in order to continue achieving sustainable, quality growth.
GESTER International Co.,Limited has unique staffs who will serve you with their best ideas by affording you with high-quality service.
The tensile tester manufacturers-type textile testing equipment is poised to lead the tensile tester manufacturers market.
To ensure desired results, it is very essential that you get the right kind of from a certified provider..
Choosing the right abrasion testing equipment is essential for obtaining accurate and repeatable wear resistance results. DIN Abrasion Tester and Taber Abrasion Tester are two widely used abrasion testing machines, but they are designed for different material types and testing purposes.
This article provides a detailed comparison between DIN Abrasion Tester and Taber Abraser, covering their working principles, specimen requirements, industry applications, standard compliance, technical characteristics, operation features and practical advantages. DIN Abrasion Tester is mainly designed for rubber, elastic materials, tires, conveyor belts and footwear soles, while Taber Abrasion Tester is suitable for flat materials such as coatings, textiles, plastics, leather, metals and decorative surfaces.
By understanding the differences between these two abrasion testing methods, laboratories can select the most suitable abrasion tester based on sample geometry, testing standards and production quality control requirements.
Quick links
Products