loading

PPE Testing Equipment Manufacturer | Safety Equipment Testing Machines | GESTER


Products

Anti-smog screens, black technology to filter PM2.6

There is a saying that goes like this: There is no lack of beauty in this world, but the eyes that discover beauty are lacking. But now, this sentence has been ridiculed as 'I had a pair of eyes that found beauty, but I lost it to the smog.' Junada Technology is a foreign member of the Royal Academy of Engineering, a member of the Singapore Academy of Engineering, a member of the Indian National Academy of Engineering, and a member of the ASEAN Academy of Engineering and Technology. It is understood that Academician Syram has long been engaged in research on the processing and surface functionalization of polymer composites, biocomposites, and electrospinning nanofibers, mainly to provide technical support for the research and development and industrialization of the project, and to solve technical difficulties. Breathable and impermeable, energy saving by one third: In the exhibition hall of Junada Technology, an anti-smog screen window has successfully attracted the attention of visitors. The reporter saw that this anti-smog screen is not much different from ordinary screens in terms of appearance; in terms of color, the appearance of the anti-smog screens is light gray, slightly brighter and whitish; With a touch of the hand, it is obvious that the anti-smog screens are stronger and smoother, and the 'eyes' are small. The staff performed a performance demonstration on the spot, and poured a bottle of water on the screen window. After a few minutes, no drop of water penetrated the screen. 'The electrospinning nanofiber material is a fiber material with a diameter in the range of tens to hundreds of nanometers. This screen window is covered with a layer of porosity of 80% on the surface of ordinary screen window, and millions of micropores are densely packed per square centimeter. The nanofiber membrane has a pore size distribution between 100 nanometers and 300 nanometers. Taking into account the production cost and actual use effect, the filtration efficiency of PM2.5 (particulates with a diameter of 2.5 microns or less) is controlled at about 95%, which can effectively block fog Haze and dust enter the room without affecting the normal circulation of air, and have auxiliary functions such as sterilization, disinfection and radiation protection.' said Dr. Yu Miao, chairman of Junada Technology. According to reports, electrospinning nanofiber materials is the use of electrospinning technology to nanofiber fibers, which are currently used in screens, masks and filter cartridges. Yu Miao introduced that from the perspective of filtering dust, electrospun nanofiber materials can achieve a filtering effect of more than 99% for PM0.3 (solid particles or droplets with a diameter less than or equal to 0.3 microns), and achieve traditional filtering. Pressure drop below half. In the case of masks, when the pressure drop is reduced, the resistance will be reduced, and the ventilation effect will be good, and the smoothness of human breathing will be improved. Take the filter cartridge in the industrial field, the greater the resistance, the more powerful the fan must be drawn. The more energy is consumed, and the pressure drop and resistance come down, the energy is saved. The use of nanofiber materials can save one-third of the energy. From the laboratory to the industrialization: Internationally, professional electrospinning nanofiber production equipment and solution suppliers have appeared around 2010. For China, low output and poor quality controllability have always been the primary problems for nanofibers to move from the laboratory to the industrialization. 'We plan to start with the production of electrospinning nanofiber equipment, and then produce nanofiber products, along with China's'One Belt One Road' initiative, and expand the international market.' Academician Syram introduced that the project is positioned as the number one electrospinning in China A supplier of overall industrial solutions for new nanofiber materials, as well as the industrial development of new nanofiber materials in the fields of energy, electronics, biomedicine, chemicals and the environment, and functional textiles. To this end, on the basis of research results related to nanofibers at home and abroad, Gonada Technology starts with the most critical functional indicators such as the strength of nanofibers to bring the technology to the market. It is worth mentioning that Junada Technology also has the only domestic electrospinning nanofiber mass production line for mass production of nanofiber films in factories and workshops. 'The company itself is positioned as a technology exporter, and the output is equipment, raw materials and production technology.' Yu Miao introduced that the first step of the project is mainly for the development of screens, masks and other civilian products; the second step is for industrial water filtration and seawater. The development of desalination and air filtration filters, filter elements, and filter cartridges, the third step is the research and development of medical equipment. Electrospinning nanofiber technology can also help upgrade backward production capacity. 'As far as ordinary gauze is concerned, the price of a square meter is only a few yuan, the profit is very low, and it consumes a lot of labor and energy. Our medical anti-haze gauze is generally sold at 200 yuan to 400 yuan in the market. Yuan per square meter, the highest sold for 800 yuan to 1,000 yuan, which gives new vitality to the traditional industry.' Zhu Qinwen, deputy general manager of the company introduced. At present, the company's first-phase product anti-smog screens have been promoted in cooperation with larger screen manufacturers in China. The initial plan is to promote this technology in Hebei. The product has been mass-produced in November this year, and the order exceeds 20,000 square meters. . In addition, with the addition of anti-smog masks and electrospinning nanofiber products such as electrospinning guns, the sales revenue of this project will exceed 5 million yuan this year, and it is expected that the cumulative sales in the next three years will exceed 100 million yuan.

GET IN TOUCH WITH Us
recommended articles
Bally Resistance Flexing Tester – An Effective Method for Testing Material Flexing
The Bally Resistance Flexing Tester, also known as the Bally Leather Flexometer, is an essential testing instrument for evaluating the flex durability of leather, coated fabrics, synthetic leather, and textile materials. By accurately simulating repeated bending conditions encountered during actual use, the tester helps manufacturers assess material performance, prevent premature product failures, and meet international quality standards. This article explores the working principle, key benefits, applicable testing standards, and common specimen materials suitable for Bally flexing resistance testing.
How to Choose a PPE Testing Equipment Manufacturer: 10 Things to Check
Choosing the right PPE testing equipment manufacturer is an important decision for PPE manufacturers, testing laboratories, certification bodies, research institutions, and quality inspection organizations. The right supplier should provide more than individual testing machines—it should offer standards-compliant equipment, reliable measurement performance, calibration support, technical expertise, customization, and long-term service. This guide explains 10 essential factors to check before selecting a PPE testing equipment manufacturer.
ISO 20345 vs ASTM F2413: Differences Between Safety Footwear Standards
ISO 20345 and ASTM F2413 are the two most recognized safety footwear standards used worldwide to evaluate protective footwear performance. Although both standards define minimum requirements for impact resistance and compression protection, differences in test energy levels, compression loads, marking systems, and hazard classifications can affect certification results. This article explains the key differences between ISO 20345 and ASTM F2413, helping footwear manufacturers, exporters, and quality control teams select the correct testing standard and improve compliance with international safety requirements.
Universal Testing Machine Dual Column GT-K01: A Reliable Solution for footwear Testing
The Universal Testing Machine Dual Column GT-K01 is a high-precision mechanical testing instrument widely used in the footwear industry to evaluate tensile, compression, bending, tearing, and bonding strength of various materials. With advanced servo control, high-accuracy displacement measurement, and compliance with multiple international testing standards such as SATRA, ASTM, ISO, and BS, the GT-K01 footwear universal testing machine provides reliable data for quality control, material research, and product certification. This article explores the working capabilities, structural features, and practical value of the GT-K01 universal testing machine in footwear testing and manufacturing processes.
Why GESTER is Recognized as a Global Top Safety Shoe Tester Exporter
As global industrial safety requirements tighten, GESTER International Co., Ltd has emerged as a globally recognized top safety shoe tester exporter, serving 168 countries with over 25 years of specialized expertise. The company’s success hinges on its commitment to precision engineering, compliance with international standards (ISO, ASTM, EN, SATRA), and partnerships with renowned testing institutes like SGS, Intertek, and TUV. Its product lineup, including the Safety Glove & Shoe Upper Cutting Tester GT-KC29 and cut resistance testers, delivers reliable, repeatable data for safety footwear durability, cut resistance, and other critical performance indicators. Complemented by a comprehensive global service network (on-site installation, calibration, staff training) and OEM/ODM customization capabilities, GESTER streamlines quality control for manufacturers, facilitating market access and ensuring workplace safety. Trusted by PPE brands and laboratories worldwide, GESTER bridges technical excellence and practical usability to drive efficiency in safety shoe certification and global trade.
PPE Testing Laboratory Equipment List
Setting up a PPE testing laboratory requires the right combination of instruments for safety footwear, gloves, protective clothing, masks and safety helmets. This guide explains the core testing equipment used in modern PPE laboratories, the standards they support, and the functions of each instrument, helping manufacturers, third-party laboratories and certification bodies choose a reliable and compliant testing setup.
Mask Testing Equipment: Everything You Need to Know
This article comprehensively introduces mask testing equipment, including its definition, application significance, core international testing standards, main equipment types and functional characteristics. It also puts forward a step-by-step selection guide and common selection misunderstandings, providing a reference for mask manufacturers, third-party testing institutions and regulatory departments to select appropriate testing equipment, so as to ensure mask product quality, pass international certification and protect user safety.
PPE Trends: Insights from a China Top PPE Testing Machine Company
As 2026 approaches, the global PPE industry is transformed by stricter industrial safety regulations, healthcare awareness, and evolving international standards (ISO/ASTM/EN). Key trends include the rise of Smart PPE, adoption of sustainable bio-based materials, and converging global compliance requirements—demanding high-precision, automated testing equipment with data traceability. GESTER International Co., Ltd., a China top PPE testing machine company with 25+ years of expertise, addresses these challenges through modular, standards-aligned solutions (e.g., TPP Thermal Protection Tester GT-RC02A, TDM Cut Test Machine GT-KC28) and long-term partnerships with SGS, TUV, and Intertek. Offering global technical support (installation, calibration, training) and automated, multi-standard-compatible equipment, GESTER empowers PPE manufacturers to meet 2026’s rigorous safety benchmarks. This article explores PPE performance evolution, 2026 industry trends, technological testing responses, and strategic procurement tips—emphasizing how China’s leading testing machine providers bridge hardware innovation with global compliance to protect human life. For professional PPE testing solutions, visit https://www.gesterinstruments.com/.
GESTER: China Top PPE Testing Equipment Company Leading Global Safety Standards
Since 1997, GESTER International Co., Ltd has emerged as China’s top PPE testing equipment company, with 25+ years of R&D experience in high-precision testing instruments. Serving clients in over 160 countries and partnering with global leaders like SGS, Intertek, and TUV, GESTER aligns its products with international standards (ISO, ASTM, EN, GB) to ensure reliable PPE performance. Highlighted by the GT-RC02B TPP Thermal Protection Tester—capable of simulating extreme thermal environments and calculating critical safety metrics like TPP values and escape time—and the GT-KC28 TDM Cut Test Machine, GESTER’s portfolio covers thermal protection, cut resistance, footwear testing, and more. The company offers comprehensive support, including ISO 17025/NFPA-aligned calibration, on-site installation, and staff training, empowering PPE manufacturers and testing laboratories to meet stringent global regulations, prevent workplace injuries, and accelerate market access. As a leader in global safety standards, GESTER combines technical precision, user-centric design, and lifecycle service to deliver tailored solutions for high-risk industries worldwide. Visit https://www.gesterinstruments.com/ for full product details.
ISO 20344 Tester – Tested by ISO 20344 Standard
EN ISO 20344 is the core international test method standard for full-performance detection of safety footwear. This article systematically explains the full range of whole-shoe test items covered by the ISO 20344 standard, analyzes the core practical advantages of mandatory ISO 20344 testing for factories and laboratories, and matches a complete set of dedicated ISO 20344 testers one by one. It also sorts out mainstream associated safety footwear standards worldwide, providing one-stop standardized testing solutions for safety footwear manufacturers, third-party testing institutions and occupational safety supervision departments.
GESTER International Co., Ltd. gains certificates of ISO 9001, 3A and SGS Audited supplier etc. with advanced design concept, excellent manufacturing technology and strict quality control.
WeChat
Contact us
Tel: +86-595-28886108 
Fax: +86-595-22515221
E-mail: sales10@gester-instruments.com,
                 info@gester-instruments.com
Mobile/Whatapp/ Wechat:  
             + 86(0)18059985379
Address:  No.15, Chifeng Road,Licheng Region, Quanzhou city of Fujian,PR China.
Customer service
detect