loading

PPE Testing Equipment Manufacturer | Safety Equipment Testing Machines | GESTER


Products

Black technology! Cut off the 'black tail' of diesel cars

As an important tool for controlling haze with an iron fist, in late October last year, Xi'an established the country's first diesel vehicle exhaust purification and treatment demonstration zone. The 'active maintenance + diesel purification' source treatment technology adopted by it has not only achieved remarkable results, but also the promotion and demonstration model of government-enterprise cooperation and academy-enterprise collaboration has also attracted much attention. To this end, the reporter went to research sites to find out. Independent innovation of hard technology 'new medicine' has special effects. Recently, the owner of the muck truck, Guo Lei, came to the Qinling treatment point in the diesel vehicle exhaust gas treatment demonstration zone on Lifeng 4th Road, Lintong District, Xi'an, and waited in line to give him 15 tons of diesel. The car undergoes exhaust purification 'surgery'. Under the command of on-site technicians, Guo Lei drove the car into the inspection area. With a kick of the accelerator, thick black smoke gushes out. Tests showed that the average smoke value of the car was 5.28m-1, far exceeding the national standard 1.39m-1. Liu Haijun, the person in charge of the control point in the demonstration zone, said, “The smoke value is an indicator of PM particulate matter emission. The black smoke from the vehicle is basically due to the wear of the oil pump plunger and the deterioration of the nozzle atomization performance due to the impurities in the diesel fuel supply system.” Cleaning the fuel tank, repairing the fuel injection nozzle, adjusting the fuel pump, updating the diesel purifier... Under the guidance of the technicians, Guo Lei's car began to receive a 'treatment' called 'active maintenance + diesel purification'. The 'active maintenance + diesel purification' comprehensive treatment technology is the first system solution developed by Xi'an Tianhou Filtration Technology Co., Ltd. for diesel vehicle exhaust pollution. It refers to the use of a unique external oil purification device to clean and purify the fuel supply system, adjust, repair and replace Key components to improve operating efficiency; at the same time, according to the vehicle conditions, the self-developed diesel purifier is selected and updated, and the polymer deep filtration technology is used to ensure fuel cleanliness. After about two hours of treatment, the truck that had been dragging the 'black tail' for a long time was magically 'docked' and reborn. Going to the self-checking station again, the smoke value is displayed as 0.33m-1, and the emission of pollutant particles drops by 93.75%. 'Stubborn disease' is healed, what is the effect? At 2 pm, the reporter drove with Guo Lei to the third-party inspection agency-Xi'an Shun'an Vehicle Inspection Line. The re-inspection results showed that the average smoke value of the car was 0.23m-1, which was almost the highest emission level for new vehicles in China. The limit is a quarter of 0.8m-1. Demonstration of Governance Let 'Secret Recipe' Become 'Proven Recipe' Lintong District of Xi'an is a well-known tourist destination at home and abroad, with heavy emission reduction tasks and great pressure. How to find a breakthrough in the treatment of haze with an iron fist? The 'hard technology' of Tianhou Company has aroused the close attention of Lintong District. After repeated investigations and with the support of the municipal government, Lintong District took the lead in issuing the 'Working Plan of Diesel Vehicle Exhaust Emission Control Demonstration Project' last year, with financial support and government supervision of vehicles as the preliminary pilot, and comprehensively launched the governance demonstration work. In order to guide the transition from passive management to active management of super-elevated vehicles, Lintong District used rewards instead of compensation. For diesel vehicles that completed the treatment within one month of the prescribed time limit, each vehicle was given a reward of more than 5,000 yuan. After that, the financial subsidy was gradually reduced. At the same time, the environmental protection, traffic police, quality supervision, urban management and other departments are mobilized to work together, and the street office community environmental protection grid staff is responsible for mobilizing publicity; all vehicles with excessive emissions that are included in the treatment are prohibited from operating on the road without treatment, and severe penalties will be imposed for evading treatment. 'The treatment technology used in the demonstration area is a'microsurgery' for black-tailed'sick cars'.' According to Liu Sanmin, the head of Lintong District, Xi'an, 'simple, time-saving, low investment and quick return' is The key to acceptance and active participation by diesel car owners. 'Firstly, it does not change any form of vehicles and engines; secondly, it takes only two or three hours for the average single-vehicle treatment; thirdly, the average cost of treatment for vehicles is about 10,000 yuan, which is only the post-processing of particles that are already available in the market. One third of the cost of technology.' Multi-party collaboration made 'special effects' 'universal effects' and 'black tail' cut off, and particulate matter emissions were drastically reduced. But what exactly are other emission indicators such as nitrogen oxides and carbon compounds? Not long ago, researchers from the Institute of Earth Environment of the Chinese Academy of Sciences brought in a large vehicle of testing equipment and completed the efficiency testing of five types of emission indicators for five consecutive days and five nights. Xue Yonggang, a postdoctoral researcher at the Institute of Earth Environment of the Chinese Academy of Sciences, told reporters: “Through testing experiments on 105 emissions from 6 diesel vehicles in 5 categories, preliminary data shows that the exhaust concentration and total emissions of vehicles after treatment have both decreased. Among them, carbon monoxide, carbon monoxide, The concentrations of carbon dioxide, hydrocarbons, and nitrogen oxides have each dropped by more than 30%.' 'The pollution control of diesel vehicle exhaust emissions is a worldwide problem, and all parties need to collaborate and innovate to overcome difficulties.' Xi'an Air Quality Assurance Research Program Project Group Leader, Cao Junji, deputy director of the Institute of Earth Environment of the Chinese Academy of Sciences, said that the front-end comprehensive management technology of Tianhou Company is significantly advanced. The reporter learned that in 2014, the State Council issued the 'Guiding Opinions on Innovating Investment and Financing Mechanisms in Key Fields to Encourage Social InvestmentSince then, relevant ministries and commissions have also issued a series of normative documents. Relevant experts believe that the aforementioned policy environment has opened up new space for the widespread promotion of diesel vehicle exhaust gas treatment technologies.

GESTER International Co.,Limited is a company that offers a wide selection of . OEM and ODM services are also available to users. To know more, go to GESTER Instruments.

tensile tester manufacturers are the in thing today. To buy a for yourself do visit GESTER International Co.,Limited at GESTER Instruments.

GESTER International Co.,Limited will do this by managing our business with integrity and the highest ethical standards, while acting in a socially responsible manner with particular emphasis on the well-being of our teammates and the communities we serve.

GESTER International Co.,Limited will need to find one that fits our needs and budgets, and still turns out a quality product.

textile testing equipment are less complex compared with tensile tester manufacturers.

GET IN TOUCH WITH Us
recommended articles
PPE Trends: Insights from a China Top PPE Testing Machine Company
As 2026 approaches, the global PPE industry is transformed by stricter industrial safety regulations, healthcare awareness, and evolving international standards (ISO/ASTM/EN). Key trends include the rise of Smart PPE, adoption of sustainable bio-based materials, and converging global compliance requirements—demanding high-precision, automated testing equipment with data traceability. GESTER International Co., Ltd., a China top PPE testing machine company with 25+ years of expertise, addresses these challenges through modular, standards-aligned solutions (e.g., TPP Thermal Protection Tester GT-RC02A, TDM Cut Test Machine GT-KC28) and long-term partnerships with SGS, TUV, and Intertek. Offering global technical support (installation, calibration, training) and automated, multi-standard-compatible equipment, GESTER empowers PPE manufacturers to meet 2026’s rigorous safety benchmarks. This article explores PPE performance evolution, 2026 industry trends, technological testing responses, and strategic procurement tips—emphasizing how China’s leading testing machine providers bridge hardware innovation with global compliance to protect human life. For professional PPE testing solutions, visit https://www.gesterinstruments.com/.
EN ISO 20345 Safety Footwear Standard — How to Choose the ISO 20345 Tester
EN ISO 20345 is the core international standard for general-purpose safety footwear, defining minimum performance requirements for foot protection against various workplace hazards. This article elaborates on the definition, key highlights and mainstream safety classes of the EN ISO 20345 standard, covering applicable industry scenarios. It further provides a systematic step-by-step guide for selecting qualified ISO 20345 testing equipment, involving test item confirmation, equipment performance evaluation and reliable supplier selection. Finally, it introduces professional ISO 20345-compliant testing solutions provided by GESTER for footwear manufacturers and third-party testing institutions.
ISO 20345 vs ASTM F2413: Differences Between Safety Footwear Standards
ISO 20345 and ASTM F2413 are the two most recognized safety footwear standards used worldwide to evaluate protective footwear performance. Although both standards define minimum requirements for impact resistance and compression protection, differences in test energy levels, compression loads, marking systems, and hazard classifications can affect certification results. This article explains the key differences between ISO 20345 and ASTM F2413, helping footwear manufacturers, exporters, and quality control teams select the correct testing standard and improve compliance with international safety requirements.
How to Choose the Right Safety Shoes Testing Equipment Supplier?
Safety shoes are essential personal protective equipment (PPE) in high-risk industries. To ensure compliance with international standards such as EN ISO 20345 and ASTM F2413, professional testing equipment is required. This article explains common safety shoes test items, corresponding testing machines, and how to choose a reliable safety shoes testing machine supplier. It also analyzes key factors such as technical capability, standard compliance, equipment stability, and cost performance to help enterprises build a strong quality control system and enhance global competitiveness.
PPE Testing Laboratory Equipment List
Setting up a PPE testing laboratory requires the right combination of instruments for safety footwear, gloves, protective clothing, masks and safety helmets. This guide explains the core testing equipment used in modern PPE laboratories, the standards they support, and the functions of each instrument, helping manufacturers, third-party laboratories and certification bodies choose a reliable and compliant testing setup.
Safety Footwear Tester Guide ISO 20346 with Buying Tips
This guide explains the ISO 20346 standard for general-purpose protective footwear, differentiates it from related ISO standards, and shares core buying tips for qualified safety footwear testers. It also introduces professional multi-standard compliant testing equipment for footwear quality control and compliance verification.
What is EN 149 & Why is it Important?
EN 149 is the core European standard for particle-filtering half masks and FFP respirators. This article elaborates on the definition, structure, performance classification, marking rules and core advantages of EN 149, compares it with NIOSH N95, KN95, EN 143 and medical mask standards, and lists industry application scenarios, as well as professional mask and filter testing instruments compliant with EN 149 testing requirements.
How to Find a Professional Safety Glove Testing Machine Manufacturer with CE Certification?
With the global PPE market’s rapid growth, choosing a professional CE-certified safety glove testing machine manufacturer is critical for data integrity and international compliance. This article explains why CE certification is non-negotiable (ensuring EU safety/quality standards), outlines essential test items (abrasion, cut, thermal protection per EN 388/EN 407), highlights core instruments (GESTER GT-KC28 TDM Cut Tester, GT-KC29 Cutting Tester, GT-C101 Heat Contact Machine), and details how to evaluate suppliers (20+ years of experience, partnerships with SGS/Bureau Veritas, ISO 9001 certification, after-sales support). It also covers the benefits of OEM/ODM capabilities for customized solutions. Ultimately, partnering with trusted manufacturers like GESTER ensures high-precision, compliant testing to protect workers and meet global market requirements.
Why GESTER Ranks as a Leading TPP Thermal Protective Performance Tester Exporter
As a trusted leading TPP Thermal Protective Performance Tester exporter, GESTER International Co., Ltd. brings 25+ years of R&D and manufacturing expertise to PPE safety testing. Our flagship GT-RC02 series TPP testers feature advanced dual-source thermal simulation, high-sensitivity sensors, and full digital automation—delivering precise, repeatable data to evaluate thermal protection for firefighter and industrial protective clothing. Fully compliant with global standards (NFPA 1971, EN 469, ISO), GESTER’s equipment is trusted by SGS, Intertek, and top testing institutes worldwide. Backed by ISO 9001 certification, global service in 160+ countries, and professional calibration support, we empower manufacturers and labs to meet stringent safety regulations and ensure life-saving thermal protection. Discover tailored TPP testing solutions for PPE excellence at GESTER.
Why GESTER is Recognized as a Global Top Safety Shoe Tester Exporter
As global industrial safety requirements tighten, GESTER International Co., Ltd has emerged as a globally recognized top safety shoe tester exporter, serving 168 countries with over 25 years of specialized expertise. The company’s success hinges on its commitment to precision engineering, compliance with international standards (ISO, ASTM, EN, SATRA), and partnerships with renowned testing institutes like SGS, Intertek, and TUV. Its product lineup, including the Safety Glove & Shoe Upper Cutting Tester GT-KC29 and cut resistance testers, delivers reliable, repeatable data for safety footwear durability, cut resistance, and other critical performance indicators. Complemented by a comprehensive global service network (on-site installation, calibration, staff training) and OEM/ODM customization capabilities, GESTER streamlines quality control for manufacturers, facilitating market access and ensuring workplace safety. Trusted by PPE brands and laboratories worldwide, GESTER bridges technical excellence and practical usability to drive efficiency in safety shoe certification and global trade.
GESTER International Co., Ltd. gains certificates of ISO 9001, 3A and SGS Audited supplier etc. with advanced design concept, excellent manufacturing technology and strict quality control.
WeChat
Contact us
Tel: +86-595-28886108 
Fax: +86-595-22515221
E-mail: sales10@gester-instruments.com,
                 info@gester-instruments.com
Mobile/Whatapp/ Wechat:  
             + 86(0)18059985379
Address:  No.15, Chifeng Road,Licheng Region, Quanzhou city of Fujian,PR China.
Customer service
detect