Brief introduction of fabric pilling test instrument1
Test Method(S): ASTM D 3512·ASTM D49-70·ASTM D·3511·AATCC ASTM District No. 008 ASTM Standard Test Method 3512 Resistance to Pilling and Other Related Surface Changes of Textile Fabrics: (Random Roller Pilling Tester) S Random Area Tablet Tester Scope: A textile that determines drug resistance formation and other related surface changes Random areas of fabric used for pilling. Specimen 3 is laundered era, then textile conditioning edge 3 in atmospheric conditions 4“X4”The kirigami was squared at the deviation and allowed to dry and glue the sealed specimens placed in a 3-chamber as well as a pilling grey cotton fiber (2) and the original tumbled for 30 minutes. Specimens were viewed on a photographic device against evaluation criteria (ASTM adjd 3512) or Standard in Housing Construction; ASTM D 4970, Standard Test Methods for Anti-Pilling Fabrics and Other Related Surface Changes: Martindale Instrument Abrasion Tester Scope of Business: Determining Resistance to Formation of Pills and Other Related Surface Changes of Fabrics with Martindale Instrument * Specimens were washed 3 times Then conditioned textile specimens under atmospheric conditions are mounted on the bottom of the table, and a Lissajous figure in a specimen holder is used to perform a cycle. One cycle includes the action of Figure 16. The machine runs 100 cycles. The evaluation can run up to 1000 cycles. The 100-cycle evaluation interval Specimen is in the viewing device. NOTE: This test method is not applicable to fabrics with a thickness greater than 3 mm (0.125.) because such fabrics cannot be mounted in a specimen holder ) Brush Pill Test Scope of business: Brush pilling tester for fabrics to determine resistance to pill formation and other related surface changes. The condition of the samples is that the textiles 6 specimens are cut into 9 under atmospheric conditions“x 9”Square, each time the entire width of the sample from the right, center, and left zones Specimen mount brush for 4 minutes Specimens then mount face run 2 specimens in viewing device for Standard Evaluation of Photography (ASTM adjd 3512) or Standard AATCC for Indoor Fabrics , ASTM ts-008, Procedures for Appearance of Apparel and Other Textile Products After Repeated Laundering AATCC Approved Gaskets and Dryerscope: Evaluating the Overall Appearance of Garment and Other Textile Products After Repeated Laundering Specimens of Textiles Washed 5 Times Then Conditioned at Atmospheric Conditions Apparatus for Standard Evaluation of Photography (ASTM adjd 3512) or Standard and Raw Unlaundered Controls for Home Textiles More about Textile Apparatus: http://www.standard-groups.com/TextileGarment/8.html
The , essentially perfected by tensile tester manufacturers, is one of the first home appliance to be widely distributed.
should only be created by the very best textile testing equipment companies with the training, experience and know how about what is expected of them.
GESTER International Co.,Limited can assure that it is one of the best products in the market at present.
Digging into our roots and acknowledging out heritage can be fruitful on both a high-quality and professional level of textile testing equipment.
The Heat Contact Machine GT-C101 is a specialized testing instrument designed for evaluating the heat resistance and thermal protective performance of gloves, protective clothing, and other heat-resistant materials used in high-temperature environments. In industries such as smelting, casting, welding, and glass manufacturing, workers are frequently exposed to intense heat, making accurate testing of contact heat resistance essential for ensuring safety and compliance.
GT-C101 simulates real working conditions by measuring heat transfer delay and thermal transmission under instant contact with high-temperature surfaces. Fully compliant with EN 407, EN 702, and ISO 12127-1 standards, this machine provides precise, repeatable data for manufacturers, laboratories, and research institutions. With high-temperature capability up to 500°C, advanced calorimetry, digital monitoring, and adjustable contact speed, the Heat Contact Machine GT-C101 is an indispensable tool for developing and certifying next-generation PPE and heat-insulation materials.
Cut resistance is one of the most critical performance indicators in personal protective equipment (PPE) testing, directly affecting worker safety in high-risk industries such as metal processing, machinery manufacturing, and emergency rescue. The TDM Cut Test Machine GT-KC28 plays a vital role in accurately evaluating the cut resistance of PPE products, including gloves, protective clothing, footwear materials, composite materials, rubber, and industrial textiles.
By adopting high-precision force control systems, intelligent data processing, and stable transmission technology, the GT-KC28 TDM Cut Tester can accurately measure the critical cutting force of materials and ensure excellent repeatability and comparability of test results. Its user-friendly touch-screen operation, comprehensive data storage, USB data export, and built-in thermal printer greatly improve laboratory efficiency and data traceability.
The TDM Cut Test Machine GT-KC28 fully complies with major international and national standards such as ISO 13997, EN 388, ASTM F2992/F2992M, ANSI/ISEA 105, and GB 24541-2022, making it a reliable solution for PPE manufacturers, third-party testing laboratories, and research institutions. Through precise and standardized cut resistance testing, the GT-KC28 helps reduce industrial cutting injuries, supports PPE certification across global markets, and ensures that protective equipment delivers reliable safety performance in real-world applications.
Quick links
Products