loading

PPE Testing Equipment Manufacturer | Safety Equipment Testing Machines | GESTER


Products

Collecting opinions on group standards for 'Exhaled Breath Alcohol Quick Checker'

“Thousands of roads, safety first”, At the moment when the number of vehicles is increasing, driving safety has become a problem that we need to attach great importance to, but bad behaviors such as drunk driving and drunk driving are repeatedly prohibited. Alcohol detectors are commonly used equipment by traffic police, which provide support for ensuring traffic safety and strictly investigating drunk driving and drunk driving. The Exhaled Breath Alcohol Quick Checker is a device that can actively extract and measure the ethanol content in the driver's exhaled breath. The device adopts a non-contact method and does not need to use a disposable blowing tube. It not only has a short measurement time, but also is safe and low in cost. It solves the problem of unsanitary, long testing time, low efficiency and easy congestion of traditional alcohol detection instruments. Insufficient, it is widely used by traffic control and transportation management departments to quickly screen drink-driving suspects. At present, there are more than 60,000 exhaled breath alcohol rapid screening instruments in use across the country, including more than 40,000 units in the public security traffic control department and more than 20,000 units in the transportation management department. However, because there is no unified standard for the product of the exhaled breath alcohol rapid screening instrument, the production and testing are mainly based on the standards of various manufacturers. Therefore, the accuracy, stability, sensitivity and other important performance of the instrument are quite different, and the purchase from the traffic control department and inconvenience to law enforcement. In order to ensure the quality and versatility of the product and provide a basis for product certification and testing, in June 2020, the National Road Traffic Safety Product Quality Supervision and Inspection Center took the lead and applied to the China Road Traffic Safety Association for the 'Exhaled Breath Alcohol Quick Checker' group standard. . At present, the 'Quick Check Alcohol Detector', which was drafted by the National Road Traffic Safety Product Quality Supervision and Inspection Center and other units, has completed the compilation of soliciting opinions, and is now openly soliciting opinions from the public. This standard specifies the technical requirements, test methods, inspection rules, marking, packaging, transportation and storage requirements of the exhaled breath alcohol quick checker, and is applicable to the production and inspection of the breath alcohol quick checker. The formulation of this standard follows the principles of principle, adaptability and advancement. It not only refers to the relevant requirements of the country and the industry, but also according to the needs of the traffic control department, in addition to the basic performance indicators, the satellite positioning function has been added to the extended functions. And data upload function to facilitate unified management of the platform. Exhaled breath alcohol quick checker is widely used in traffic control departments, which improves the efficiency of drunk driving investigation and ensures the impartiality of drunk driving law enforcement. Unified requirements for performance and test methods can not only standardize product management, promote industry development, but also provide a basis for traffic control departments to purchase.

When you find yourself in need of textile testing equipment tensile tester manufacturers, you may not know where to begin. And that's OK! Search out GESTER International Co.,Limited to handle your textile testing equipment needs.

Satisfying our customers with the appropriate level of quality is a primary goal and a fundamental element as textile testing equipment of our business mission.

GESTER International Co.,Limited has unique staffs who will serve you with their best ideas by affording you with high-quality service.

GESTER International Co.,Limited is an online resource for today's modern woman to live a green, healthy, and happy life. We offer textile testing equipment, tensile tester manufacturers and more! Pls visit our site at GESTER Instruments to know more.

GET IN TOUCH WITH Us
recommended articles
Why GESTER Ranks as a Leading TPP Thermal Protective Performance Tester Exporter
As a trusted leading TPP Thermal Protective Performance Tester exporter, GESTER International Co., Ltd. brings 25+ years of R&D and manufacturing expertise to PPE safety testing. Our flagship GT-RC02 series TPP testers feature advanced dual-source thermal simulation, high-sensitivity sensors, and full digital automation—delivering precise, repeatable data to evaluate thermal protection for firefighter and industrial protective clothing. Fully compliant with global standards (NFPA 1971, EN 469, ISO), GESTER’s equipment is trusted by SGS, Intertek, and top testing institutes worldwide. Backed by ISO 9001 certification, global service in 160+ countries, and professional calibration support, we empower manufacturers and labs to meet stringent safety regulations and ensure life-saving thermal protection. Discover tailored TPP testing solutions for PPE excellence at GESTER.
EN ISO 20345 Safety Footwear Standard — How to Choose the ISO 20345 Tester
EN ISO 20345 is the core international standard for general-purpose safety footwear, defining minimum performance requirements for foot protection against various workplace hazards. This article elaborates on the definition, key highlights and mainstream safety classes of the EN ISO 20345 standard, covering applicable industry scenarios. It further provides a systematic step-by-step guide for selecting qualified ISO 20345 testing equipment, involving test item confirmation, equipment performance evaluation and reliable supplier selection. Finally, it introduces professional ISO 20345-compliant testing solutions provided by GESTER for footwear manufacturers and third-party testing institutions.
Technical Insight: How a Professional EN388 Gloves Tester Company Evaluates Durability
In industrial settings, protective gloves’ durability is critical for workplace safety, with the EN388 standard serving as the global benchmark for evaluating abrasion, cut, tear, and puncture resistance. GESTER International Co., Ltd., a professional EN388 gloves tester company with over 20 years of experience, delivers high-precision testing solutions to ensure accurate and reliable durability assessments. Equipped with advanced instruments like the Safety Glove & Shoe Upper Cutting Tester GT-KC29—featuring LCD display, real-time monitoring, and compliance with EN, ISO, and ASTM standards—GESTER’s solutions meet the rigorous demands of laboratories, manufacturers, and international testing institutes such as SGS, TUV, and Intertek. Adhering to ISO 9001 quality management systems and offering comprehensive after-sales support (installation, training, calibration), GESTER empowers clients to validate PPE performance, mitigate workplace risks, and achieve global regulatory compliance. For trusted EN388 gloves durability testing equipment and integrated laboratory solutions, GESTER is the preferred partner in the PPE industry.
What Are the ISTA Standard Tests and ISTA Testing Equipment?
ISTA (International Safe Transit Association) standard tests are globally recognized transportation packaging test procedures designed to evaluate the safety and reliability of products and their packaging throughout the logistics chain. By simulating real-world transportation conditions such as drops, vibration, impact, stacking, and compression, ISTA testing helps identify potential packaging weaknesses before products enter large-scale distribution. ISTA testing equipment—including drop testers, vibration testers, incline impact machines, and compression testers—plays a critical role in accurately reproducing these conditions under laboratory settings. Proper selection and use of ISTA-compliant equipment enable manufacturers to reduce transportation damage, lower return costs, enhance packaging design, and improve customer confidence in product quality and logistics safety.
How to Choose the Right Safety Shoes Testing Equipment Supplier?
Safety shoes are essential personal protective equipment (PPE) in high-risk industries. To ensure compliance with international standards such as EN ISO 20345 and ASTM F2413, professional testing equipment is required. This article explains common safety shoes test items, corresponding testing machines, and how to choose a reliable safety shoes testing machine supplier. It also analyzes key factors such as technical capability, standard compliance, equipment stability, and cost performance to help enterprises build a strong quality control system and enhance global competitiveness.
Leather Industry Innovations: GESTER at ACLE as a Footwear Testing Equipment Factory
The global leather and footwear industry is shifting toward prioritizing durability, material integrity, and functional excellence—driving demand for high-precision testing equipment. As a highlight of ACLE 2026 (All China Leather Exhibition), GESTER International Co., Ltd., a 25+ year footwear testing equipment factory, showcases innovative solutions tailored to this trend. Trusted by leading testing institutes like SGS, TUV, and Intertek, GESTER’s product lineup includes the Martindale Abrasion Tester (for surface durability), Tension Testing Machine (for mechanical properties), and Safety Shoe Cutting Tester—all compliant with ISO, ASTM, and EN standards. These instruments integrate automation (PLC systems) and data traceability to reduce human error, support ISO 9001 compliance, and streamline laboratory efficiency. With a global service network spanning 160+ countries, GESTER offers on-site installation, calibration, and software updates to ensure long-term usability. The article also outlines strategic procurement tips for manufacturers, emphasizing modular design, standard compatibility, and supplier track records. For leather and footwear brands seeking to enhance product reliability, avoid recalls, and stay competitive, GESTER’s ACLE 2026 innovations and end-to-end support provide a definitive quality assurance solution.
Safety Footwear Tester Guide ISO 20346 with Buying Tips
This guide explains the ISO 20346 standard for general-purpose protective footwear, differentiates it from related ISO standards, and shares core buying tips for qualified safety footwear testers. It also introduces professional multi-standard compliant testing equipment for footwear quality control and compliance verification.
GESTER's Success at Shoes & Leather - Vietnam 2025
GESTER successfully participated in Shoes & Leather Vietnam 2025 (July 9-11), showcasing cutting-edge footwear testing machines. Visitors explored equipment like the Bally Resistance Flexing Tester and Martindale Abrasion Tester, with many expressing strong collaboration interest. Learn more about GESTER’s innovative solutions for the footwear industry.
Understanding the Color Fastness To Washing Testing Machine GT-D07
The GESTER GT-D07 Color Fastness To Washing Testing Machine is designed to evaluate the color durability of dyed fabrics under washing and dry-cleaning conditions. By simulating real washing processes, it helps determine how resistant a fabric is to fading and staining, ensuring consistency, reliability, and compliance with international standards. With stainless-steel construction, safety features, and precise temperature and timing control, the GT-D07 provides an efficient and standardized testing solution for textile manufacturers worldwide.
How to Find a Professional Safety Glove Testing Machine Manufacturer with CE Certification?
With the global PPE market’s rapid growth, choosing a professional CE-certified safety glove testing machine manufacturer is critical for data integrity and international compliance. This article explains why CE certification is non-negotiable (ensuring EU safety/quality standards), outlines essential test items (abrasion, cut, thermal protection per EN 388/EN 407), highlights core instruments (GESTER GT-KC28 TDM Cut Tester, GT-KC29 Cutting Tester, GT-C101 Heat Contact Machine), and details how to evaluate suppliers (20+ years of experience, partnerships with SGS/Bureau Veritas, ISO 9001 certification, after-sales support). It also covers the benefits of OEM/ODM capabilities for customized solutions. Ultimately, partnering with trusted manufacturers like GESTER ensures high-precision, compliant testing to protect workers and meet global market requirements.
GESTER International Co., Ltd. gains certificates of ISO 9001, 3A and SGS Audited supplier etc. with advanced design concept, excellent manufacturing technology and strict quality control.
WeChat
Contact us
Tel: +86-595-28886108 
Fax: +86-595-22515221
E-mail: sales10@gester-instruments.com,
                 info@gester-instruments.com
Mobile/Whatapp/ Wechat:  
             + 86(0)18059985379
Address:  Block 402,4th floor, f buliding, shengfulan business Center, no.577 jitai road, economic and  Technological development zone quanzhou of fujian.China.
Customer service
detect