PPE Testing Equipment Manufacturer | Safety Equipment Testing Machines | GESTER
Common problems and solutions of American standard dryers1
Common Problems Possible Cause Solutions The working voltage of the machine is 220-240V. Check the fuse and choose a time-delay fuse. Abnormal sound. The dryer has not been used for a long time. The dryer that has not been used for a long time will have a sound when it is reused. Noise The dryer is not placed horizontally. Refer to the installation guide. Place the dryer horizontally. Do not heat the fuse or circuit breaker. Replace the fuse. Reset the circuit breaker. 220-240V running time is too short Automatic running program ends prematurely The sensor cannot sense the load, reset the dryer horizontally, change the drying settings The superheat cooling process is not started and the cooling process is started. After the cooling process is over, take out the sample. The temperature is set too high. Select a lower temperature or use the automatic drying process. Article source: (Hong Kong) Co., Ltd.?
Quick links