Common problems and solutions of American standard dryers
2021-07-26
Gester Instruments
306
Common problems, possible causes and solutions The dryer door does not work. Make sure that the door is completely closed when the dryer is working. The Start button is not pressed correctly or is pressed for too long. Press the Start button again until the dryer drum is running incorrectly. The working voltage of the machine is 220-240V. Check the fuse. If the time-delay fuse is selected, the sound dryer will not be used for a long time. If the dryer has not been used for a long time, there will be a sound when it is reused. Noise Dryer is not placed horizontally. Refer to the installation guide. Place the dryer horizontally. Do not heat the fuse or breaker. Replace the fuse, reset the circuit breaker and the air supply valve is not open. When dry drying, you need to turn on the air supply valve. 220-240V running time is too short, the automatic running program ends early, the sensor cannot sense the load, reset the dryer horizontally, change the drying setting, the sample is too threaded, and the filter is blocked. Please clean the filter sample before using the dryer. The cooling process is not started during the overheating cooling process, and the sample is taken out after the cooling process is over. The temperature is set too high, select a lower temperature or use the automatic drying process. Article source: Standard Group (Hong Kong) Co., Ltd.?
GET IN TOUCH WITH Us
recommended articles
This article fully explains the working principle, applicable international standards, test advantages and application scope of safety footwear compression and puncture tester GT-KB12A. It covers core protective performance testing of safety shoe toecap and sole steel plate, complies with GB, ISO, EN, ASTM and other global standards, and serves manufacturers, third-party labs and safety footwear R&D institutions for quality control .
The demand for precise PPE safety testing has surged with the evolution of protective gear, making TDM (Tomodynamometer) cut resistance testing a critical process for evaluating protective gloves and industrial textiles. This article details the top features of a certified TDM cut resistance tester supplier for laboratory use, including compliance with international standards (EN 388, ISO 13997, ASTM F2992), high-precision mechanical engineering, automated workflows, robust data management, and integrated safety features. It highlights GESTER International Co., Ltd.—a 20+ year experienced manufacturer with ISO 9001 certification and partnerships with SGS, Intertek, and TUV—as a leading supplier, offering the GT-KC28 TDM Cut Test Machine and comprehensive services (on-site installation, calibration, global technical support). For laboratories seeking reliable, standard-compliant testing solutions to validate PPE safety claims, this article provides actionable insights into strategic procurement. Visit https://www.gesterinstruments.com/ for more technical specifications and PPE testing solutions.
In industrial settings, protective gloves’ durability is critical for workplace safety, with the EN388 standard serving as the global benchmark for evaluating abrasion, cut, tear, and puncture resistance. GESTER International Co., Ltd., a professional EN388 gloves tester company with over 20 years of experience, delivers high-precision testing solutions to ensure accurate and reliable durability assessments. Equipped with advanced instruments like the Safety Glove & Shoe Upper Cutting Tester GT-KC29—featuring LCD display, real-time monitoring, and compliance with EN, ISO, and ASTM standards—GESTER’s solutions meet the rigorous demands of laboratories, manufacturers, and international testing institutes such as SGS, TUV, and Intertek. Adhering to ISO 9001 quality management systems and offering comprehensive after-sales support (installation, training, calibration), GESTER empowers clients to validate PPE performance, mitigate workplace risks, and achieve global regulatory compliance. For trusted EN388 gloves durability testing equipment and integrated laboratory solutions, GESTER is the preferred partner in the PPE industry.
This guide explains the ISO 20346 standard for general-purpose protective footwear, differentiates it from related ISO standards, and shares core buying tips for qualified safety footwear testers. It also introduces professional multi-standard compliant testing equipment for footwear quality control and compliance verification.
Pilling testing plays a vital role in textile quality control, helping manufacturers evaluate and improve the wear performance of fabrics. Through the use of advanced instruments like ICI Pilling Box Test Method (GT-C18) , Martindale Abrasion Test Method (GT-C13B) , and Random Tumble Pilling Test Method (GT-C19A) , laboratories can conduct precise and standardized assessments, ensuring that final textile products deliver superior appearance, comfort, and longevity.
Selecting the correct safety footwear test method is essential for ensuring product durability, worker protection, and international compliance. Different tests evaluate different performance characteristics, including impact resistance, slip resistance, and outsole abrasion. This article explains how each testing method works, the applicable ISO, ASTM, DIN, and SATRA standards, and when manufacturers should use each test to improve product quality, reduce failures, and meet global certification requirements.
ISTA (International Safe Transit Association) standard tests are globally recognized transportation packaging test procedures designed to evaluate the safety and reliability of products and their packaging throughout the logistics chain. By simulating real-world transportation conditions such as drops, vibration, impact, stacking, and compression, ISTA testing helps identify potential packaging weaknesses before products enter large-scale distribution. ISTA testing equipment—including drop testers, vibration testers, incline impact machines, and compression testers—plays a critical role in accurately reproducing these conditions under laboratory settings. Proper selection and use of ISTA-compliant equipment enable manufacturers to reduce transportation damage, lower return costs, enhance packaging design, and improve customer confidence in product quality and logistics safety.
EN 149 is the core European standard for particle-filtering half masks and FFP respirators. This article elaborates on the definition, structure, performance classification, marking rules and core advantages of EN 149, compares it with NIOSH N95, KN95, EN 143 and medical mask standards, and lists industry application scenarios, as well as professional mask and filter testing instruments compliant with EN 149 testing requirements.
Setting up a PPE testing laboratory requires the right combination of instruments for safety footwear, gloves, protective clothing, masks and safety helmets. This guide explains the core testing equipment used in modern PPE laboratories, the standards they support, and the functions of each instrument, helping manufacturers, third-party laboratories and certification bodies choose a reliable and compliant testing setup.
The A+A Trade Fair in Düsseldorf (2026) highlights tightening global PPE safety regulations, shifting the industry from basic compliance to comprehensive performance verification. As international standards (ISO, EN, ASTM) become more granular, professional PPE testing equipment suppliers like GESTER play a pivotal role in bridging theoretical standards and practical implementation. GESTER’s high-precision, multi-standard testing tools (covering cut resistance, thermal protection, liquid penetration, etc.), backed by ISO 9001 certification and partnerships with SGS/TUV, ensure data traceability, reliability, and compliance. With 20+ years of expertise, modular innovation, and holistic service (calibration, training), the supplier supports manufacturers and laboratories in meeting stringent safety benchmarks, enabling global market entry and safeguarding worker lives. Strategic procurement of such future-ready equipment is key to long-term occupational safety success.
GESTER International Co., Ltd. gains certificates of ISO 9001, 3A and SGS Audited supplier etc. with advanced design concept, excellent manufacturing technology and strict quality control.
WeChat
Quick links
Products
Contact us
Mobile/Whatapp/ Wechat:
+ 86（0）18059985379
Address: No.15, Chifeng Road,Licheng Region, Quanzhou city of Fujian,PR China.
Friendly Links: Physial Testing Instruments And Equipments