PPE Testing Equipment Manufacturer | Safety Equipment Testing Machines | GESTER
Common problems and solutions of American standard washing machines1
Common Problems Possible Cause Solutions If the sample is too tight, there will be a lot of noise during the dehydration process, but it is normal for the load sensing system to start and the load sensing system will work for a few minutes before the washing starts. Whether the washing machine can't work or can't fill the water supply check whether the water valve connection is normal, cold, and the hot water interface should be connected to the power supply, the ground wire, and the extension cord. Please do not add other samples after the start of the washing process to avoid the unbalanced operation of the inner tank and the dehydration failure. The dehydration rate should be properly increased. Appropriately reduce the amount of detergent and remove excess foam Article Source: (Hong Kong) Co., Ltd.
Quick links