loading

PPE Testing Equipment Manufacturer | Safety Equipment Testing Machines | GESTER


Products

Comparative Analysis on the Burning Performance Standards of Textiles in Various Countries

Europe, America, Japan and other countries have long legislated the combustion performance of a series of textile products, including clothing fabrics, pajamas, children's pajamas, carpets, mattresses, curtains, etc., which require that they pass the combustion test before they can be produced and used; the United States The Consumer Product Safety Commission (CPSC) also legislates that all textiles used in high-rise buildings, aviation, shipping, hospital nursing homes, mass gathering places and flammable work areas must pass the flame resistance test. The following mainly introduces the corresponding technical regulations and standards of the United States, Canada, Japan, Europe and China. 1. The United States The United States passed the Flammable Fabric Act (FFA) as early as 1953, revised it in 1954 and 1967, and was enforced by the US Consumer Product Safety Commission (CPSC) (Table 2). Standards and regulations applicable to the scope of combustion performance technical requirements Remarks 16CFR1610 clothing textile flammability standard level 1: general flammability does not contain lint, soft hair, tufts and lint fabrics and other fabrics without raised fibers on the surface. The flame spread time is ≥3.5s. Can be used for clothing products. Fabrics containing pile, soft hair, tufts and lint, and other fabrics without raised fibers on the surface. The flame spreading time is more than 7s or the surface burning is relatively rapid (within 0-7s), but the flame intensity cannot ignite or melt the substrate of the fabric. Grade 2: Moderately flammable fabrics containing lint, soft wool, tufts and lint, and other fabrics without raised fibers on the surface. The flame spread time is 4~7s (including the burning and melting time of the basal tissue). It can be used in clothing products, but should be used with caution, because the flammability test results of textile fabrics will vary with the characteristics of the fabric. Grade 3: Fast and violent burning of fabrics that do not contain lint, soft wool, tufts and lint, and other fabrics that do not have raised fibers on the surface. The flame spreading time is less than 4s. Such fabrics are considered to be flammable and dangerous, and cannot be used in clothing products because of their rapid and violent burning. Fabrics containing pile, soft hair, tufts and lint, and other fabrics without raised fibers on the surface. The flame spreading time is less than 4s, and the flame intensity is sufficient to burn or melt the base tissue. 16CFR1615 Children's Pajamas Flammability Standard No. 0-6 Children's Pajamas and related materials. The average carbonization length of the 5 samples is less than or equal to 17.8cm (7”). The carbonization length of any of the 5 samples is less than or equal to 25.4cm (10”), that is, none of the samples can be completely burned. There is only one sampling method-conventional sampling method: a batch of 500 dozen. 16CFR1616 Flammability Standard for Children's Pajamas No. 0-6 Children's Pajamas and Related Materials, No. 7-14 Children's Pajamas and Related Materials. Two sampling methods: ①Conventional sampling method; ②Relaxed sampling method: 15 consecutive batches of qualified samples can be implemented with a relaxed sampling method: 1,000 dozen as a batch. 16CFR1630 Carpet and felt surface flammability standard carpets. The distance from the edge of the carbonized area of u200bu200ba single sample to any point on the edge of the metal frame (d20.3cm) is ≥2.54cm, then the sample is qualified; at least 7 of the 8 samples are the distance from the edge of the carbonized area to the edge of the metal frame >2.54cm, the carpet test is qualified. 16CFR1631 Small carpets and carpets surface flammability standard Small carpets: size ≤183cm, area ≤223m2. 16CFR1632 mattresses and mattresses flammability standards for various household mattresses, excluding those installed on vehicles Kind of mattress. If the carbonization length measured at the closest point to the cigarette in any direction on the surface of the mattress is ≤5.1cm, then the single cigarette test is partially qualified; generally 18 cigarettes are required to be lit for the test, and all parts of the test are qualified to qualify the mattress. 2. The Canadian regulations on textile flame retardancy are included in the dangerous goods laws and regulations, and Health Canada is responsible for sending inspectors to enforce them (Table 3). The scope of application of standards and regulations, combustion performance, technical requirements, hazardous products regulations, any flammable, toxic and other products that pose a threat to public health and safety, textiles and clothing also belong to the flat fabric of textile fiber products. Flame expansion time>3.5s. The surface is raised fabric. Flame expansion time> 4s. Children's pajamas, pillows, cots, cribs or other textiles used for sleep with size ≤14. Flame expansion time>7s. Hazardous Products (Children’s Pajamas) Regulations The average carbonization length of 5 samples of children’s pajamas is ≤178mm; the carbonization length of a maximum of 1 sample is equal to the overall length of the sample (254mm). Children's pajamas treated with flame retardant should be attached with a permanent label indicating the flame retardant, the cleaning process and the guarantee that the flame retardancy of the product will not be reduced after use. The Hazardous Products (Carpets) Regulations require that carpets have flammability warnings on their labels. Dangerous Products (Tent) Regulations. The damage length of the textile material floor material of the tent is ≤25mm; the continuous burning time of a single sample of the wall and ceiling materials is ≤4s, the average continuous burning time of the sample is ≤2s; the damage length of a single sample is ≤255mm , The average damage length of the sample varies according to the square meter weight of the sample and has a different specified range. The flame spread time of plush toys made of textile fiber materials in the Hazardous Products (Toys) Regulations is> 7s. If one of the five samples fails, another five samples will be tested. If two of the ten samples fail Qualified, the product is unqualified. Dangerous Products (Mattress) Regulations The length of carbonization or charring in any direction around the mattress cigarette is ≤50mm, and after the cigarette is extinguished, the sample continues to burn for ≤10min.

There are a wide variety of which are scientifically tested to have positive effects on the ability to tensile tester manufacturers. tensile tester manufacturers textile testing equipment is one of them.

So, get ready to dazzle the world with a wide range of tensile tester manufacturers textile testing equipment! Buy one today!! Visit GESTER International Co.,Limited at GESTER Instruments.

Deeper connections between GESTER and textile testing equipmentare made when you go beyond the white lights of a corporate space.

GET IN TOUCH WITH Us
recommended articles
Why GESTER is Recognized as a Global Top Safety Shoe Tester Exporter
As global industrial safety requirements tighten, GESTER International Co., Ltd has emerged as a globally recognized top safety shoe tester exporter, serving 168 countries with over 25 years of specialized expertise. The company’s success hinges on its commitment to precision engineering, compliance with international standards (ISO, ASTM, EN, SATRA), and partnerships with renowned testing institutes like SGS, Intertek, and TUV. Its product lineup, including the Safety Glove & Shoe Upper Cutting Tester GT-KC29 and cut resistance testers, delivers reliable, repeatable data for safety footwear durability, cut resistance, and other critical performance indicators. Complemented by a comprehensive global service network (on-site installation, calibration, staff training) and OEM/ODM customization capabilities, GESTER streamlines quality control for manufacturers, facilitating market access and ensuring workplace safety. Trusted by PPE brands and laboratories worldwide, GESTER bridges technical excellence and practical usability to drive efficiency in safety shoe certification and global trade.
GESTER: China Top PPE Testing Equipment Company Leading Global Safety Standards
Since 1997, GESTER International Co., Ltd has emerged as China’s top PPE testing equipment company, with 25+ years of R&D experience in high-precision testing instruments. Serving clients in over 160 countries and partnering with global leaders like SGS, Intertek, and TUV, GESTER aligns its products with international standards (ISO, ASTM, EN, GB) to ensure reliable PPE performance. Highlighted by the GT-RC02B TPP Thermal Protection Tester—capable of simulating extreme thermal environments and calculating critical safety metrics like TPP values and escape time—and the GT-KC28 TDM Cut Test Machine, GESTER’s portfolio covers thermal protection, cut resistance, footwear testing, and more. The company offers comprehensive support, including ISO 17025/NFPA-aligned calibration, on-site installation, and staff training, empowering PPE manufacturers and testing laboratories to meet stringent global regulations, prevent workplace injuries, and accelerate market access. As a leader in global safety standards, GESTER combines technical precision, user-centric design, and lifecycle service to deliver tailored solutions for high-risk industries worldwide. Visit https://www.gesterinstruments.com/ for full product details.
DIN Abrasion Tester vs Taber Abraser: What Is the Difference?

Choosing the right abrasion testing equipment is essential for obtaining accurate and repeatable wear resistance results. DIN Abrasion Tester and Taber Abrasion Tester are two widely used abrasion testing machines, but they are designed for different material types and testing purposes.

This article provides a detailed comparison between DIN Abrasion Tester and Taber Abraser, covering their working principles, specimen requirements, industry applications, standard compliance, technical characteristics, operation features and practical advantages. DIN Abrasion Tester is mainly designed for rubber, elastic materials, tires, conveyor belts and footwear soles, while Taber Abrasion Tester is suitable for flat materials such as coatings, textiles, plastics, leather, metals and decorative surfaces.

By understanding the differences between these two abrasion testing methods, laboratories can select the most suitable abrasion tester based on sample geometry, testing standards and production quality control requirements.
Heat Contact Machine GT-C101-The Ultimate Selection Guide

The Heat Contact Machine GT-C101 is a specialized testing instrument designed for evaluating the heat resistance and thermal protective performance of gloves, protective clothing, and other heat-resistant materials used in high-temperature environments. In industries such as smelting, casting, welding, and glass manufacturing, workers are frequently exposed to intense heat, making accurate testing of contact heat resistance essential for ensuring safety and compliance.

GT-C101 simulates real working conditions by measuring heat transfer delay and thermal transmission under instant contact with high-temperature surfaces. Fully compliant with EN 407, EN 702, and ISO 12127-1 standards, this machine provides precise, repeatable data for manufacturers, laboratories, and research institutions. With high-temperature capability up to 500°C, advanced calorimetry, digital monitoring, and adjustable contact speed, the Heat Contact Machine GT-C101 is an indispensable tool for developing and certifying next-generation PPE and heat-insulation materials.
How to Choose the Right Glove Testing Equipment
Choosing the right glove testing equipment is essential for evaluating the safety, durability, and protective performance of gloves. This guide explains the main types of glove testing equipment, including thermal protection, cut and abrasion resistance, tensile strength, and environmental conditioning equipment. It also introduces key glove testing standards such as EN 388, EN ISO 13997, ISO 37, ASTM D412, ISO 12947, and related thermal protection standards. By understanding your testing requirements, applicable standards, sample conditioning needs, maintenance requirements, and budget, you can build a more efficient and standard-compliant glove testing laboratory.
Sweating Guarded Hotplate GT-C98 Guide: Find the Right Testing Machine for Your Needs
The Sweating Guarded Hotplate GT-C98 is a professional instrument designed to evaluate the thermal resistance (Rct) and water-vapor resistance (Ret) of textiles and related materials. By simulating human skin heat dissipation and sweating under controlled conditions, it provides accurate and repeatable data for comfort and protective performance analysis. This guide introduces the testing principle, applicable international standards, industry applications, and key technical features to help users identify the right testing machine for product development, quality control, and research.
Bally Resistance Flexing Tester – An Effective Method for Testing Material Flexing
The Bally Resistance Flexing Tester, also known as the Bally Leather Flexometer, is an essential testing instrument for evaluating the flex durability of leather, coated fabrics, synthetic leather, and textile materials. By accurately simulating repeated bending conditions encountered during actual use, the tester helps manufacturers assess material performance, prevent premature product failures, and meet international quality standards. This article explores the working principle, key benefits, applicable testing standards, and common specimen materials suitable for Bally flexing resistance testing.
Cobb Test Paper Absorption Tester GT-N07 - A Comprehensive Guide
The Cobb Test Paper Absorption Tester GT-N07 is an essential instrument for evaluating the water absorption properties of paper and paperboard materials. This test, commonly known as the Cobb method, helps determine how much water paper can absorb over a specified time under controlled conditions—crucial for assessing its suitability in printing, packaging, and coating applications.
What Are the ISTA Standard Tests and ISTA Testing Equipment?
ISTA (International Safe Transit Association) standard tests are globally recognized transportation packaging test procedures designed to evaluate the safety and reliability of products and their packaging throughout the logistics chain. By simulating real-world transportation conditions such as drops, vibration, impact, stacking, and compression, ISTA testing helps identify potential packaging weaknesses before products enter large-scale distribution. ISTA testing equipment—including drop testers, vibration testers, incline impact machines, and compression testers—plays a critical role in accurately reproducing these conditions under laboratory settings. Proper selection and use of ISTA-compliant equipment enable manufacturers to reduce transportation damage, lower return costs, enhance packaging design, and improve customer confidence in product quality and logistics safety.
Mask Testing Equipment: Everything You Need to Know
This article comprehensively introduces mask testing equipment, including its definition, application significance, core international testing standards, main equipment types and functional characteristics. It also puts forward a step-by-step selection guide and common selection misunderstandings, providing a reference for mask manufacturers, third-party testing institutions and regulatory departments to select appropriate testing equipment, so as to ensure mask product quality, pass international certification and protect user safety.
GESTER International Co., Ltd. gains certificates of ISO 9001, 3A and SGS Audited supplier etc. with advanced design concept, excellent manufacturing technology and strict quality control.
WeChat
Contact us
Tel: +86-595-28886108 
Fax: +86-595-22515221
E-mail: sales10@gester-instruments.com,
                 info@gester-instruments.com
Mobile/Whatapp/ Wechat:  
             + 86(0)18059985379
Address:  No.15, Chifeng Road,Licheng Region, Quanzhou city of Fujian,PR China.
Customer service
detect