loading

GESTER PPE Testing Equipment | Professional Safety Footwear Testing Equipment, Glove Testing Equipment, Protective Clothing Testing Equipment


Products

Excessive inventory in the textile and apparel industry will affect the textile equipment industry in the future?

Under the circumstance that the listed companies in the textile and garment industry have seen high inventories one after another, some companies have begun to vigorously control their inventories. However, there are still some companies that are still facing the problem of destocking. According to the data compiled by the reporter, as of April 5, 2016, the total inventory of 32 listed companies in the textile and garment industry from 2011 to 2015 has increased year by year, with a total of 18.588 billion yuan and 19.349 billion yuan respectively. , 20.259 billion yuan, 21.051 billion yuan and 22.209 billion yuan. If the inventory growth rate from 2011 to 2015 is calculated, the total inventory of 22.209 billion yuan in 2015 increased by 19% from 18.588 billion yuan in 2011. Ninety percent of companies have inventories over 100 million yuan According to statistics from Flush, 28 of the 32 listed companies in the textile and apparel industry have inventories over 100 million yuan, accounting for nearly 90 percent. The increase in export volume is the key to destocking. The reason for the increase in inventory in the textile and garment industry is that the domestic demand market is relatively sluggish, and the most fundamental demand problem has not been solved. In this regard, Zhu Qinghua, a researcher in light industry of CIC Consulting, told reporters:“If the international economy grows slowly or sinks again‘economic quagmire’, the textile and clothing inventory is difficult to return to normal.”Zhu Qinghua believes that my country's textile and garment industry is highly dependent on exports, and the increase in export volume is the key to alleviating the high inventory of textiles and garments. It can be seen from the above data that the textile industry will be a period of destocking in the future. Then the textile equipment industry will develop along with the development of the textile industry, and the dynamics of the textile industry must always be paid attention to. Then the textile industry will inevitably develop in the next few years. With the pressure of high inventory, production will inevitably slow down. During the process of destocking, the demand of the textile equipment industry will inevitably decline, which will lead to a further decline in the textile industry. How should the textile equipment industry face such a situation? Since 2014, the decline of the textile industry has been very obvious, and the accompanying textile equipment industry has experienced a significant decline. Therefore, the textile equipment industry needs to do a good job in this regard, in the face of increasingly fierce competition. , The textile equipment industry is bound to face the situation of reshuffling. Whoever has the last laugh is the winner. Now that the problems in the industry are solved, can the transition go smoothly? Quality and service are the fundamental factors of the industry, while expanding foreign trade exports and expanding the international market. More about Textile Instruments: http://www.standard-groups.com/TextileGarment/

The point for GESTER International Co.,Limited is that managerial processes are as important as other inputs in production and can create significant competitive advantage.

All of the experts GESTER International Co.,Limited consulted stressed that the best recovery plans are the ones made before you need them, not afterward.

The proprietor has many years experience in providing promotion services and is a sought after expert in textile testing equipment.

Among improvements to textile testing equipment, nearly half of consumers considered quality and service as the most important change a business could make in its supply chain.

textile testing equipment is attracting a great positive feedback from the customers. And many of our clients are fully satisfied with it.

GET IN TOUCH WITH Us
recommended articles
What is the Safety Glove & Shoe Upper Cutting Tester GT-KC29
The Safety Glove & Shoe Upper Cutting Tester GT-KC29 is a high-precision testing instrument developed to measure the cut resistance performance of safety gloves and footwear uppers. In industrial and construction environments where sharp tools and metal edges pose significant injury risks, the GT-KC29 provides a reliable evaluation method by simulating real cutting motion. This tester meets EN 388 section 6.2, ISO 20344:2021 section 5.23, GB/T 20991 section 6.14, and other global standards, making it essential for PPE manufacturers, testing laboratories, and quality control departments. With automated operation, high repeatability, and multi-standard compliance, it helps companies improve product safety levels, enhance global competitiveness, and ensure superior protection for end users.
EN ISO 20345 Safety Footwear Standard — How to Choose the ISO 20345 Tester
EN ISO 20345 is the core international standard for general-purpose safety footwear, defining minimum performance requirements for foot protection against various workplace hazards. This article elaborates on the definition, key highlights and mainstream safety classes of the EN ISO 20345 standard, covering applicable industry scenarios. It further provides a systematic step-by-step guide for selecting qualified ISO 20345 testing equipment, involving test item confirmation, equipment performance evaluation and reliable supplier selection. Finally, it introduces professional ISO 20345-compliant testing solutions provided by GESTER for footwear manufacturers and third-party testing institutions.
According to ASTM D642 Standard: Detailed Box Compression Strength Tester GT-N02A
The ASTM D642 standard defines the test method for determining the compressive resistance of shipping containers, like corrugated boxes, when faced with static compressive forces. This article details the test procedure and introduces the GESTER GT-N02A and GT-N02B Box Compression Testers, which are fully compliant with ASTM D642, ISO 12048, and TAPPI T804. These versatile machines perform destructive strength tests, constant value tests, and simulated long-term stacking tests to ensure your pac
Heat Contact Machine GT-C101-The Ultimate Selection Guide

The Heat Contact Machine GT-C101 is a specialized testing instrument designed for evaluating the heat resistance and thermal protective performance of gloves, protective clothing, and other heat-resistant materials used in high-temperature environments. In industries such as smelting, casting, welding, and glass manufacturing, workers are frequently exposed to intense heat, making accurate testing of contact heat resistance essential for ensuring safety and compliance.

GT-C101 simulates real working conditions by measuring heat transfer delay and thermal transmission under instant contact with high-temperature surfaces. Fully compliant with EN 407, EN 702, and ISO 12127-1 standards, this machine provides precise, repeatable data for manufacturers, laboratories, and research institutions. With high-temperature capability up to 500°C, advanced calorimetry, digital monitoring, and adjustable contact speed, the Heat Contact Machine GT-C101 is an indispensable tool for developing and certifying next-generation PPE and heat-insulation materials.
Installation Training for the Incline Impact Tester GT-N49
Our expert team provides comprehensive on-site installation and training for the Incline Impact Tester GT-N49. This critical packaging testing equipment simulates real-world impacts during handling, transport, and stacking to evaluate product damage resistance. Learn about its key features like flexible moving plates, height adjustment, pneumatic angle control, and remote operation safety. Our service ensures proper setup, operational mastery, maintenance guidance, and troubleshooting support fo
Strengthening Safety Standards: The Role of a PPE Testing Equipment Supplier at A+A
The A+A Trade Fair in Düsseldorf (2026) highlights tightening global PPE safety regulations, shifting the industry from basic compliance to comprehensive performance verification. As international standards (ISO, EN, ASTM) become more granular, professional PPE testing equipment suppliers like GESTER play a pivotal role in bridging theoretical standards and practical implementation. GESTER’s high-precision, multi-standard testing tools (covering cut resistance, thermal protection, liquid penetration, etc.), backed by ISO 9001 certification and partnerships with SGS/TUV, ensure data traceability, reliability, and compliance. With 20+ years of expertise, modular innovation, and holistic service (calibration, training), the supplier supports manufacturers and laboratories in meeting stringent safety benchmarks, enabling global market entry and safeguarding worker lives. Strategic procurement of such future-ready equipment is key to long-term occupational safety success.
ISO 20344 Tester – Tested by ISO 20344 Standard
EN ISO 20344 is the core international test method standard for full-performance detection of safety footwear. This article systematically explains the full range of whole-shoe test items covered by the ISO 20344 standard, analyzes the core practical advantages of mandatory ISO 20344 testing for factories and laboratories, and matches a complete set of dedicated ISO 20344 testers one by one. It also sorts out mainstream associated safety footwear standards worldwide, providing one-stop standardized testing solutions for safety footwear manufacturers, third-party testing institutions and occupational safety supervision departments.
What Are the ISTA Standard Tests and ISTA Testing Equipment?
ISTA (International Safe Transit Association) standard tests are globally recognized transportation packaging test procedures designed to evaluate the safety and reliability of products and their packaging throughout the logistics chain. By simulating real-world transportation conditions such as drops, vibration, impact, stacking, and compression, ISTA testing helps identify potential packaging weaknesses before products enter large-scale distribution. ISTA testing equipment—including drop testers, vibration testers, incline impact machines, and compression testers—plays a critical role in accurately reproducing these conditions under laboratory settings. Proper selection and use of ISTA-compliant equipment enable manufacturers to reduce transportation damage, lower return costs, enhance packaging design, and improve customer confidence in product quality and logistics safety.
Must-See Innovation: Leading Safety Helmets Tester Company at A+A International Trade Fair
The A+A International Trade Fair in Düsseldorf serves as the global hub for occupational safety and PPE innovation, where GESTER—an industry leader with over 20 years of R&D experience—shines as a top safety helmets tester company. This article explores the evolving global safety standards (ISO, ASTM, EN, ANSI) driving demand for advanced testing equipment, and highlights GESTER’s high-precision solutions for impact absorption, penetration resistance, and flame resistance testing. With ISO 9001 certification, computerized automation, real-time data capture, and a comprehensive global support framework (on-site installation, calibration, OEM/ODM services), GESTER empowers PPE manufacturers and laboratories to meet rigorous compliance requirements. The company’s presence at A+A underscores its commitment to bridging innovative PPE design with reliable safety validation, helping businesses accelerate time-to-market while ensuring worker protection worldwide.
Leather Industry Innovations: GESTER at ACLE as a Footwear Testing Equipment Factory
The global leather and footwear industry is shifting toward prioritizing durability, material integrity, and functional excellence—driving demand for high-precision testing equipment. As a highlight of ACLE 2026 (All China Leather Exhibition), GESTER International Co., Ltd., a 25+ year footwear testing equipment factory, showcases innovative solutions tailored to this trend. Trusted by leading testing institutes like SGS, TUV, and Intertek, GESTER’s product lineup includes the Martindale Abrasion Tester (for surface durability), Tension Testing Machine (for mechanical properties), and Safety Shoe Cutting Tester—all compliant with ISO, ASTM, and EN standards. These instruments integrate automation (PLC systems) and data traceability to reduce human error, support ISO 9001 compliance, and streamline laboratory efficiency. With a global service network spanning 160+ countries, GESTER offers on-site installation, calibration, and software updates to ensure long-term usability. The article also outlines strategic procurement tips for manufacturers, emphasizing modular design, standard compatibility, and supplier track records. For leather and footwear brands seeking to enhance product reliability, avoid recalls, and stay competitive, GESTER’s ACLE 2026 innovations and end-to-end support provide a definitive quality assurance solution.
Quanzhou Gester International Co.,Ltd gains certificates of ISO 9001, 3A and SGS Audited supplier etc. with advanced design concept, excellent manufacturing technology and strict quality control.
WeChat
Contact us
Tel: +86-595-28886108 
Fax: +86-595-22515221
E-mail: sales10@gester-instruments.com,
                 info@gester-instruments.com
Mobile/Whatapp/ Wechat:  
             + 86(0)18059985379
Address:  Block 402,4th floor, f buliding, shengfulan business Center, no.577 jitai road, economic and  Technological development zone quanzhou of fujian.China.
Customer service
detect