GB8410-Automobile interior combustion test method and standard
The fire performance of automobile interior parts has received widespread attention. The burning test methods and standards of automobile interior parts mainly include American Standard FMVSS302, Canadian Standard CMVSS302, National Standard GB8410, and European Standard Directive 95/28/EC. GB8410 standard name GB8410 Flammability of automotive interior materials Flammability of automotive interior materials. The GB8410 standard specifies the technical requirements and test methods for the horizontal tongs characteristics of automotive interior materials. The GB8410 standard applies to the evaluation of the horizontal combustion characteristics of automotive interior materials. The GB8410 standard technical requirements require that the burning speed of interior materials is not greater than 100mm/min. Burning rate: the ratio of the measured burning distance to the time it takes to burn this distance, in millimeters per minute (mm/min). GB8410 Automobile interior material combustion characteristics test principle: Clamp the sample horizontally on the U-shaped bracket, and ignite the free end of the sample with a specified height of flame in the combustion box for 15 seconds to determine whether the flame on the sample has gone out or when it has gone out , And the distance the sample burns and the time it takes to burn that distance. GB8410 Automotive Interior Materials Combustion Characteristics Test-Class A/B/C/D/E Classification According to the different burning distance and burning rate of automobile materials, the materials are classified into five grades. FMVSS302 standard name FMVSS302 Federal Motor Vehicle Safety Standard No.302; Flammability of interior materials. FMVSS302 Federal Motor Vehicle Safety Standard No.302; Flammability of interior materials. FMVSS302 standard purpose and scope of application This FMVSS302 standard describes the flame retardancy requirements of materials used in automobile passenger compartments. The purpose of this standard is to reduce injuries and deaths caused by vehicle fires, especially those that originate in the interior of the vehicle such as matches or cigarettes. The FMVSS302 standard applies to passenger cars, multi-purpose passenger cars, trucks and buses. FMVSS302 sample size and quantity Sample size and quantity: 102mm×356mm×thickness (the thickness of the sample used in the car, but not more than 13mm, if it is greater than 13 mm, it must be cut into 13 mm.) At least 10 samples, If there are different burning speeds in different directions, at least 10 samples in each direction should be sampled in different directions. If the size of the material does not meet the requirements of the test, a sample that meets the requirements of the test shall be made. More about Flammability Testing Instruments: http://www.standard-groups.com/FlammabilityTesting/
come in many forms, like tensile tester manufacturers and tensile tester manufacturers, and they all provide efficient solution for our tensile tester manufacturers needs.
Providing highly qualified textile testing equipment products and services, GESTER International Co.,Limited is committed to helping clients make lasting improvements to their performance and realize their most important goals. Over the past decades, we’ve built a firm uniquely equipped to this task. Go to GESTER Instruments for more info.
Knowing what promotions are popular and get the most activity as textile testing equipment from current and potential customers can play a role in your overall strategy.
textile testing equipment has its grasp on oversees market and has a very good repute. Our products are available at very competitive prices.
Safety gloves are critical personal protective equipment (PPE) used in industries such as manufacturing, welding, construction, firefighting and chemical processing. To ensure reliable protection, gloves must undergo strict performance testing before entering the market.
Professional gloves testing equipment helps manufacturers evaluate important properties including cut resistance, thermal protection, contact heat resistance, tensile strength and impact protection. By selecting suitable testing machines, companies can improve product quality, meet international standards and reduce safety risks.
This complete buying guide introduces the main types of glove testing equipment, explains their applications and provides practical advice on choosing the right solution for your laboratory or production requirements.
Choosing the right abrasion testing equipment is essential for obtaining accurate and repeatable wear resistance results. DIN Abrasion Tester and Taber Abrasion Tester are two widely used abrasion testing machines, but they are designed for different material types and testing purposes.
This article provides a detailed comparison between DIN Abrasion Tester and Taber Abraser, covering their working principles, specimen requirements, industry applications, standard compliance, technical characteristics, operation features and practical advantages. DIN Abrasion Tester is mainly designed for rubber, elastic materials, tires, conveyor belts and footwear soles, while Taber Abrasion Tester is suitable for flat materials such as coatings, textiles, plastics, leather, metals and decorative surfaces.
By understanding the differences between these two abrasion testing methods, laboratories can select the most suitable abrasion tester based on sample geometry, testing standards and production quality control requirements.
Quick links
Products