Geotextile Universal Tensile Strength Testing Machine GT-C01-3

Geotextile Universal Tensile Strength Testing Machine GT-C01-3

Tensile strength geotextile Application

This computerized universal testing machine is designed for testing geosynthetics in transportation, water conservation, tunnel, construction those industry. universal strength testing machine is concluding stretch, tearing, busting, peeling, seam testing of geotextile, composite geotextiles, geogrid, geomembrane.

Geotextile Tensile Tester Feature

1.Universal Tensile Strength Testing Machine Double-column gantry structure, generous shape with operating stability.

2.AC servo system drive, ball screw, suitable for all kinds of geotextile tensile tests.

3.Have security protect measures of limiting displacement, over capacity, force value.

4.Import sensor, the force precision above 0.2% F.S.

5.Equip with online port, specialty development material strength test software. It can print and save report & provide test data for geotextile assaying.

6.Can provide all kinds of relative standard test function or customized according to customer.

7.utm universal testing machine is software can do data analysis of breaking point, break off point, yield point, initial modulus and Elasticity plasticity deformation, easy to do mechanics test analysis of varieties of materials.

Main Technical Parameters 

Model: GT-C01-3

Speed Adjust Range: 30KN, 50KN, 100KN

Force Resolution: 1/100,000

Force Accuracy: ≤+/-0.2% F.S

Stroke Resolution: 0.01 mm

Test Speed: 0.01-500mm/min

Stroke Space: 1000mm

Force Unit Switch: Kgf, N, Ibf, g, ton, Mpa

Machine Drive: Servo Motor Drive, Synchronous Wheel and Precision Ball Screw Drive

Operate Control: Can use Operation Screen, Connecting with Computer, Pad and Cellphone

Dimensions (WxDxH): 1050×700×1750mm

Weight: 300kg

Power Supply: AC380V 50/60HZ 1.5KW

Standards:

GB/T13763, 14800, 19978, EN ISO 12236,

ASTM 4595, ASTM D 4632

Geotextile tensile strength tester Maintenance 

First, the geotextile tensile strength test machine fitted with the fixture should be coated with rust-proof oil for safekeeping; 

Second, due to frequent use of the jaws, easy to wear and tear, too much oxidation, easy to lead to oil leakage of small piston damage, so the jaws should be cleaned frequently to keep clean (preferably cleaned after each test); 

Third, regular inspection of the jaws parts of the screws, such as loosening found in a timely manner, tighten; 

Fourth, the inserts of the steel plate and liner contact The [1] sliding surface, dovetail groove surface on the liner should be kept clean, and a thin layer of MoS2 (molybdenum disulphide) grease should be applied regularly; 

v. Regularly check the transmission of the sprocket, and if any looseness is found, please re-tension the tensioner wheel.

Maintenance of oil source: 

i. Regularly check whether there is any oil leakage at the main machine and oil source, if any oil leakage is found, the sealing ring or combination pad should be replaced in time; 

ii. Regularly change the oil suction filter and cartridge, and replace the hydraulic oil according to the use of the machine and the service life of the oil.

Third, when not doing the test for a long time, pay attention to turn off the host power. If the machine is in standby mode, the switch should be played to the ‘load’ gear, because if the switch is played in the ‘fast’ gear, the electromagnetic reversing valve has been in the state of power, will affect the service life of the device.

Control system maintenance: 

I. Regularly check the controller rear panel of the connection line is good contact, if loose, should be tightened in time; 

II. After the test, if there is a longer period of time without using the machine, turn off the controller and the computer; 

III. Controller on the interface for a one-to-one correspondence, insert the wrong interface may cause damage to the device; 

IV. Plugging the interface on the controller must be turned off the power supply of the controller.

Are you looking for ? GESTER International Co.,Limited has the collection you want, like tensile tester manufacturers or tensile tester manufacturers and many more in the online stores. Visit GESTER Instruments to know more.

This is designed for conduct tensile, compression, bending, shearing, bonding strength, peeling, tearing and other tests for rubber, plastic, leather, metal, nylon line, fabric, paper, aviation, packaging, construction, petrifaction, electrician, vehicle and other materials.

More than half of customers said they have faith with GESTER International Co.,Limited and textile testing equipment. Simultaneously being able to offer not only the product but also the service, gives the customer a quality 'one-stop-shop' service.