How to maintain the display screen of the instrument

With the advancement of technology, display screens are used more and more widely in instruments and equipment. The display screen can not only visually observe the progress of the test, but also control the progress of the test at any time. So how to maintain the instrument display screen? Maintenance methods: 1. Anti-magnetic: long-term exposure to magnetic fields may magnetize or damage some electronic components. 2. High temperature resistance: High temperature will greatly shorten the lifespan, and electronic components will also accelerate aging, so it is best to place them in a place with better ventilation. 3. Moisture-proof: Humidity has a great influence on the lifespan. It is best to keep the ambient humidity between 30% and 80%. When the humidity exceeds 80%, condensation will occur, and the electronic components in the machine may also be damaged by moisture. Rust, corrosion, and severe cases will short circuit the circuit board. Button mask, there will also be degumming phenomenon. When the humidity is lower than 30%, electrostatic interference will occur. Therefore, it is not necessary to regularly power on and work for a period of time to drive out the moisture in the machine for a long time. 4. Anti-glare light: Under the irradiation of strong light, the fuselage is easy to age and turn yellow, and the liquid crystal accelerates aging and reduces the luminous efficiency. As a result, the brightness has to be adjusted very high during use. As a result, the aging is further accelerated, which greatly increases the life of the display. shorten. Therefore, do not place it in a place with strong sunlight or where the light must pass. It is best to place the display in a place with weak sunlight or no light; 5. Dustproof: Because the printed circuit board inside the display will absorb a lot of Dust affects the heat dissipation of electronic components. If the temperature is too high, leakage will occur and the components will be burned. Moreover, dust can absorb moisture and corrode the electronic circuits inside the display. Therefore, the monitor should be placed in a clean and clean environment during normal use. 6. Others: When adjusting the brightness knob, it should be slow and steady, and do not turn it hard to prevent damage to the knob. If the display content does not change for a long time, it is best to use a screen saver.

With technology speeding up in lighting speed, have created quite a name for itself amidst tensile tester manufacturers and it happens to have a lot of benefits as well.

GESTER International Co.,Limited offers a vast array of , and for all tastes and styles. When you want to kick your tensile tester manufacturers up a notch, you want GESTER Instruments!

GESTER International Co.,Limited knew if this worked for us, it would work for others, so we took the exclusive product and program and re-developed it to be more accessible to customers.

We persevere in keeping the customers pleasant and supporting them with textile testing equipment at a reasonable price.