PPE Testing Equipment Manufacturer | Safety Equipment Testing Machines | GESTER

Introduction of National Standards such as 'Woven Children's Clothing'1

2022-08-26

Gester Instruments

281

The General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China and the National Standards Commission issued the 2015 No. 25 Standard Release Announcement, which approved the release of 42 related standards such as textiles, shoes, and paper, all of which are commonly used and important standards, so stay tuned. Please refer to the following table for details: Serial No. Standard No. Standard Name instead of Standard No. Implementation Date 1GB/T 2543.1-2015 Determination of Twist of Textile Yarns Part 1: Direct Counting Method Outsole, insole, lining and inner pad test method Water-soluble content GB/T 3903.30-2008 2016-04-013 GB/T 5711-2015 Textile color fastness test to perchloroethylene dry cleaning color fastness GB/T 5711-19972016 -04-014GB/T 6508-2015 Polyester filament dyeing uniformity test method GB/T 6508-20012016-04-015GB/T 7066-2015 Textile color fastness test color fastness to boiling GB/T 7066-19972016- 04-016GB/T 7742.2-2015Burst properties of textile fabrics-Part 2: Determination of burst strength and burst expansion by air pressure method 04-018GB/T 9111-2015 Test method for dried silkworm cocoons Determination of surface pH of paper and paperboard GB/T 13528-19922016-04-0111GB/T 14189-2015 Fiber grade polyester chips (PET) GB/T 14189-20082016-04-0112GB/T 14342-2015 Chemical fiber short fiber ratio Resistance test method GB/T 14342-19932016-04-0113GB/T 14346-2015 Chemical fiber filament evenness test method Capacitance method GB/T 14346-19932016-04-0114GB/T 14460-2015 Polyester low elastic yarn GB/T 14460-20082016-04-0115GB/T 14768-2015 Carpet combustion performance 45°Test methods and evaluation GB/T 14768-19932016-04-0116GB/T 15552-2015 Silk fabrics test methods and inspection rules GB/T 15552-20072016-04-0117GB/T 21284-2015 Footwear test methods for whole shoes Thermal insulation GB /T 21284-2007 2016-04-0118GB/T 31889-2015 Meta-aramid staple fiber 2016-04-0119GB/T 31891-2015 Technical requirements for ecological carpets 2016-04-0120GB 31892-2015 General technical requirements for safety of umbrella products 2017 -04-0121GB/T 31895-2015 Test method for wind resistance of umbrella products Weather resistance test UV light exposure Inspection method 2016-04-0127GB/T 31903-2015 Apparel interlining product naming rules, signs and packaging Determination of penetration Color fastness to storage 2016-04-0133GB/Z 32009-2015 Mechanical properties data table of new textile materials 32012-2015 New Textile Material Chemical Properties Data Sheet 2016-04-0136GB/Z 32013-2015 New Textile Material Thermal Properties Data Sheet 2016-04-0137GB/T 32014-2015 Silk Properties and Test Terms 2016-04-0138GB/T 32015 -2015 Test method for silk reduction rate 2016-04-0139GB/T 32016-2015 Determination of amino acids in silk 2016-04-0140GB/T 32023-2015 Footwear whole shoe test method Flexural part stiffness 2016-04-0141GB/T 32024-2015 Footwear whole shoe test method Torsional performance

Everyone who has a tensile tester manufacturers wants it to look tensile tester manufacturers. However, in order to achieve that, it normally involves investing in a tensile tester manufacturers textile testing equipment. GESTER International Co.,Limited can offer you the best solution.

Are you looking for more information regarding textile testing equipment tensile tester manufacturers? Visit GESTER Instruments and contact us as soon as possible!

The group's Quality Systems Manager (QSM) is responsible for ensuring that GESTER International Co.,Limited has in place systems that guarantee quality throughout the Group.

With the market analysts, exports from GESTER International Co.,Limited facilities in China will surpass the forecast.

tensile tester manufacturers textile testing equipment offer a wide range of tensile tester manufacturers and gave the user the choice of tensile tester manufacturers, tensile tester manufacturers and tensile tester manufacturers.

GET IN TOUCH WITH Us

input must not exceed 280 in length!

name

Please enter a valid email address!

Please enter a valid phone number!

phone/whatsApp

input must not exceed 280 in length!

Company Name

textarea must not exceed 65530 in length!

content

Glove Tester: Key Standards EN 388 & EN 407

Protective glove testing is the core link to verify hand safety protection performance for industrial PPE. This article focuses on the two most authoritative EU mandatory standards EN 388 and EN 407, elaborates on standardized test necessity, complete test items, professional supporting glove testers, result rating rules, and the differences between mechanical risk testing and thermal risk testing. It provides one-stop compliant testing reference for glove manufacturers, third-party testing labs, and safety supervision institutions to meet global CE certification and workplace safety production requirements.

A Complete Guide to Martindale Testing by the Best Martindale Abrasion Tester Supplier

Durability is critical for textiles and footwear, and Martindale testing is the gold standard for measuring abrasion resistance and pilling performance. This guide dives into Martindale testing’s core mechanics (Lissajous figure multi-directional friction), strategies to boost testing accuracy (sample clamping, load calibration, abrasive standardization), and compliance with international standards (ISO 12947, ASTM D4966, EN). As a top Martindale abrasion tester supplier with 25+ years of expertise, GESTER International delivers high-precision instruments (Martindale Abrasion Tester GT-C13B, etc.) certified to ISO 9001 and trusted by SGS, Bureau Veritas, and other global testing institutes. Beyond machinery, GESTER offers global technical support, on-site installation, and calibration services. The guide also includes a procurement framework to help labs select tailored Martindale testing solutions. For reliable, standard-compliant durability testing, GESTER is your trusted partner.

PPE Testing Equipment Standards: Complete Guide to ISO, EN and ASTM Requirements

Personal protective equipment must meet specific performance requirements before it can be used in demanding workplace environments. ISO, EN, and ASTM standards provide important test methods and performance requirements for different PPE categories. However, the applicable standard depends on the product, intended application, target market, and specific protection requirements.

This guide explains the role of ISO, EN, and ASTM standards in PPE testing and introduces common requirements for safety footwear, protective gloves, protective clothing, masks, and safety helmets. It also explains how laboratories can select suitable PPE testing equipment according to the applicable test method.

What is EN 149 & Why is it Important?

EN 149 is the core European standard for particle-filtering half masks and FFP respirators. This article elaborates on the definition, structure, performance classification, marking rules and core advantages of EN 149, compares it with NIOSH N95, KN95, EN 143 and medical mask standards, and lists industry application scenarios, as well as professional mask and filter testing instruments compliant with EN 149 testing requirements.

Why GESTER is Recognized as a Global Top Safety Shoe Tester Exporter

As global industrial safety requirements tighten, GESTER International Co., Ltd has emerged as a globally recognized top safety shoe tester exporter, serving 168 countries with over 25 years of specialized expertise. The company’s success hinges on its commitment to precision engineering, compliance with international standards (ISO, ASTM, EN, SATRA), and partnerships with renowned testing institutes like SGS, Intertek, and TUV. Its product lineup, including the Safety Glove & Shoe Upper Cutting Tester GT-KC29 and cut resistance testers, delivers reliable, repeatable data for safety footwear durability, cut resistance, and other critical performance indicators. Complemented by a comprehensive global service network (on-site installation, calibration, staff training) and OEM/ODM customization capabilities, GESTER streamlines quality control for manufacturers, facilitating market access and ensuring workplace safety. Trusted by PPE brands and laboratories worldwide, GESTER bridges technical excellence and practical usability to drive efficiency in safety shoe certification and global trade.

Technical Insight: How a Professional EN388 Gloves Tester Company Evaluates Durability

In industrial settings, protective gloves’ durability is critical for workplace safety, with the EN388 standard serving as the global benchmark for evaluating abrasion, cut, tear, and puncture resistance. GESTER International Co., Ltd., a professional EN388 gloves tester company with over 20 years of experience, delivers high-precision testing solutions to ensure accurate and reliable durability assessments. Equipped with advanced instruments like the Safety Glove & Shoe Upper Cutting Tester GT-KC29—featuring LCD display, real-time monitoring, and compliance with EN, ISO, and ASTM standards—GESTER’s solutions meet the rigorous demands of laboratories, manufacturers, and international testing institutes such as SGS, TUV, and Intertek. Adhering to ISO 9001 quality management systems and offering comprehensive after-sales support (installation, training, calibration), GESTER empowers clients to validate PPE performance, mitigate workplace risks, and achieve global regulatory compliance. For trusted EN388 gloves durability testing equipment and integrated laboratory solutions, GESTER is the preferred partner in the PPE industry.

Sweating Guarded Hotplate Buying Guide

Choosing the right Sweating Guarded Hotplate is essential for obtaining accurate thermal resistance (Rct) and water vapor resistance (Ret) data for textiles. This guide explains how Sweating Guarded Hotplate testing works, introduces international standards including ISO 11092 and ASTM F1868, compares the most important purchasing considerations, and answers common questions from textile laboratories and apparel manufacturers.

10 Benefits of GESTER PPE Testing Equipment You Need to Know

Choosing PPE testing equipment requires more than comparing machine prices. Measurement accuracy, test repeatability, applicable standards, fixture design, automation, calibration, customization and technical support can directly affect laboratory efficiency and testing reliability. GESTER provides integrated PPE testing solutions covering safety footwear, protective gloves, protective clothing, masks and safety helmets. This article explains 10 technical advantages to consider when comparing GESTER PPE Testing Equipment with alternative suppliers.

EN ISO 20345 Safety Footwear Standard — How to Choose the ISO 20345 Tester

EN ISO 20345 is the core international standard for general-purpose safety footwear, defining minimum performance requirements for foot protection against various workplace hazards. This article elaborates on the definition, key highlights and mainstream safety classes of the EN ISO 20345 standard, covering applicable industry scenarios. It further provides a systematic step-by-step guide for selecting qualified ISO 20345 testing equipment, involving test item confirmation, equipment performance evaluation and reliable supplier selection. Finally, it introduces professional ISO 20345-compliant testing solutions provided by GESTER for footwear manufacturers and third-party testing institutions.

How to Choose a PPE Testing Equipment Manufacturer: 10 Things to Check

Choosing the right PPE testing equipment manufacturer is an important decision for PPE manufacturers, testing laboratories, certification bodies, research institutions, and quality inspection organizations. The right supplier should provide more than individual testing machines—it should offer standards-compliant equipment, reliable measurement performance, calibration support, technical expertise, customization, and long-term service. This guide explains 10 essential factors to check before selecting a PPE testing equipment manufacturer.

GESTER International Co., Ltd. gains certificates of ISO 9001, 3A and SGS Audited supplier etc. with advanced design concept, excellent manufacturing technology and strict quality control.

WeChat

Quick links

Products

Tel: +86-595-28886108
Fax: +86-595-22515221
E-mail: sales10@gester-instruments.com,

info@gester-instruments.com

Mobile/Whatapp/ Wechat:

+ 86（0）18059985379

Address: No.15, Chifeng Road,Licheng Region, Quanzhou city of Fujian,PR China.

Friendly Links: Physial Testing Instruments And Equipments