loading

PPE Testing Equipment Manufacturer | Safety Equipment Testing Machines | GESTER


Products

Introduction to 45 degree combustion tester parameters

1. Introduction to the 45-degree combustion testing-equipment' target='_blank'>tester: Instrument name: 45-degree combustion tester Brand: Gellowen Place of origin: UK Test standards: ASTM D1230, FTMS 191-5908, CFR 16 Part1610, CAL IF TB117, NFPA702, GB/T 14644 (to ASTM D1230 is an example to introduce the principle and test of the instrument) Chinese agent: Company address: No. 2578, Gudai Road, Minhang District, Shanghai. Company Tel: 13671743966 Company Fax: 021-64208466-8101. 2. Test range: According to the standard ASTM D1230, this The test instrument can be used to judge the burning characteristics of clothing or fabrics (except baby pajamas and protective clothing), and to evaluate the burning rate of the sample according to the flame spread time. 3. Test process and rating: Sample preparation: Prepare 5 50*150mm samples. Before the test, a pre-test can be carried out to determine the fastest burning direction of the fabric and make it along the long side of the fabric. (That is, the fabric burns fastest in the direction of the long side). Fix the sample on the sample holder. After being dried and dried, it is placed in the combustion chamber. Ignite the sample, and the timer records the ignition time as 1±0.05s. The sample burns to the position of the cotton thread, causing the cotton thread to burn, so that the heavy hammer falls, and the switch stops when touched, and the burning time is displayed on the timing display. According to the burning time rating of the sample: acceptable level for clothing trade: 1. For non-suede fabrics, the burning time should be ≥3.5s; for suede fabrics, when there is no flashover on the surface, the burning time is required to be >7s; If the surface of the fabric has surface flashover, the burning time can be less than 7s. 2. Fabrics considered to be combustible by the clothing trade: suede fabrics, the burning time is between 4-7s. 3. Grade considered unacceptable by the clothing trade: non-suede fabric, burning time <3.5s. *Note: The burning time of everything is less than 3.5s, and the burning time of suede fabric is less than 4s. At the same time, the base fabric of suede fabric is ignited, charred or melted. Five additional samples need to be tested. The phenomenon of surface flashover refers to the rapid spread of flame on the surface when the basic structure of the material is not ignited. If the basic structure of the material is ignited at the same time or successively as the surface flashes, it is not a surface flash. The burning time is the average burning time of five samples. For fabrics of grades I and II, they will continue to test after dry cleaning or household washing and be rated. 4. Gellowen——The characteristics of the 45-degree combustion tester: This machine is designed with a unique push-pull handle on the transparent glass of the accessory, and the humanized design is convenient for the tester to operate. This machine is equipped with an independent timing display system, which can accurately and effectively detect and display the ignition and combustion time. This machine is equipped with a special transmission device to realize the automatic ignition function of the instrument. This machine is equipped with an external gas tank, which is safe, accurate and effective. It is convenient for the experimenter to adjust the flame length. 5. Instrument specifications and main technical parameters: Dimensions: 400*300*500mm (L*W*H) Flame spread timing range: 0-99.99s, resolution: 0.01s, ignition time: 1s or arbitrarily set. Weight: 38kg Power supply: AC 220V/50HZ/2A Flame nozzle: No. 26 injection needle More about 45 degree combustion tester: http://www.ranshaoceshi.com/

tensile tester manufacturers are required in the manufacture of almost every product and tensile tester manufacturers textile testing equipment is one of the most common machines.

To discover more about the tensile tester manufacturers benefits of , go to GESTER Instruments.

textile testing equipment are less complex compared with tensile tester manufacturers.

Establish a unique brand as GESTER that cuts through the clutter, and you'll get you the capital you need to get moving.

GESTER International Co.,Limited harnesses science and technology to create products that support safer and healthier living and that enhance the overall quality of life.

GET IN TOUCH WITH Us
recommended articles
A Complete Guide to Martindale Testing by the Best Martindale Abrasion Tester Supplier
Durability is critical for textiles and footwear, and Martindale testing is the gold standard for measuring abrasion resistance and pilling performance. This guide dives into Martindale testing’s core mechanics (Lissajous figure multi-directional friction), strategies to boost testing accuracy (sample clamping, load calibration, abrasive standardization), and compliance with international standards (ISO 12947, ASTM D4966, EN). As a top Martindale abrasion tester supplier with 25+ years of expertise, GESTER International delivers high-precision instruments (Martindale Abrasion Tester GT-C13B, etc.) certified to ISO 9001 and trusted by SGS, Bureau Veritas, and other global testing institutes. Beyond machinery, GESTER offers global technical support, on-site installation, and calibration services. The guide also includes a procurement framework to help labs select tailored Martindale testing solutions. For reliable, standard-compliant durability testing, GESTER is your trusted partner.
Why Is Shoe Slip Resistance Tester Important for Footwear Safety?
Slip resistance is one of the most critical performance indicators for modern footwear, especially safety shoes used in industrial and high-risk working environments. Slip and fall accidents frequently occur on wet or smooth surfaces, posing serious risks to workers and consumers. To prevent such accidents and improve product safety, footwear manufacturers widely use professional testing equipment such as Shoe Slip Resistance Tester and Footwear Slip Testing Machine. These devices simulate real walking conditions to measure the coefficient of friction between the shoe sole and various surfaces. This article explores the working principle, features, applications, and industry significance of shoe slip safety tester, explaining why accurate slip resistance testing is essential for footwear safety, product development, quality control, and compliance with international standards.
PPE Trends: Insights from a China Top PPE Testing Machine Company
As 2026 approaches, the global PPE industry is transformed by stricter industrial safety regulations, healthcare awareness, and evolving international standards (ISO/ASTM/EN). Key trends include the rise of Smart PPE, adoption of sustainable bio-based materials, and converging global compliance requirements—demanding high-precision, automated testing equipment with data traceability. GESTER International Co., Ltd., a China top PPE testing machine company with 25+ years of expertise, addresses these challenges through modular, standards-aligned solutions (e.g., TPP Thermal Protection Tester GT-RC02A, TDM Cut Test Machine GT-KC28) and long-term partnerships with SGS, TUV, and Intertek. Offering global technical support (installation, calibration, training) and automated, multi-standard-compatible equipment, GESTER empowers PPE manufacturers to meet 2026’s rigorous safety benchmarks. This article explores PPE performance evolution, 2026 industry trends, technological testing responses, and strategic procurement tips—emphasizing how China’s leading testing machine providers bridge hardware innovation with global compliance to protect human life. For professional PPE testing solutions, visit https://www.gesterinstruments.com/.
Safety Footwear Test Explained: Compression and Puncture Tester
This article fully explains the working principle, applicable international standards, test advantages and application scope of safety footwear compression and puncture tester GT-KB12A. It covers core protective performance testing of safety shoe toecap and sole steel plate, complies with GB, ISO, EN, ASTM and other global standards, and serves manufacturers, third-party labs and safety footwear R&D institutions for quality control .
Whole Shoes Flexing Tester GT-KA01-2: An Ultimate Guide to Its Benefits and Applications
The Whole Shoes Flexing Tester GT-KA01-2 is an advanced footwear testing instrument designed to evaluate the flexing resistance and durability of finished shoes. By simulating repeated walking and bending movements, it helps manufacturers identify cracks, material fatigue, and structural weaknesses in footwear products. Compliant with SATRA TM92, ISO 24266 Method A, and HG/T 2871-2022 Method B, this testing machine provides accurate, repeatable, and reliable results for sports shoes, casual shoes, work shoes, and other footwear types. This guide explores its features, benefits, industry applications, and frequently asked questions to help footwear manufacturers improve product quality and meet international testing requirements.
Mask Testing Equipment: Everything You Need to Know
This article comprehensively introduces mask testing equipment, including its definition, application significance, core international testing standards, main equipment types and functional characteristics. It also puts forward a step-by-step selection guide and common selection misunderstandings, providing a reference for mask manufacturers, third-party testing institutions and regulatory departments to select appropriate testing equipment, so as to ensure mask product quality, pass international certification and protect user safety.
What Are the ISTA Standard Tests and ISTA Testing Equipment?
ISTA (International Safe Transit Association) standard tests are globally recognized transportation packaging test procedures designed to evaluate the safety and reliability of products and their packaging throughout the logistics chain. By simulating real-world transportation conditions such as drops, vibration, impact, stacking, and compression, ISTA testing helps identify potential packaging weaknesses before products enter large-scale distribution. ISTA testing equipment—including drop testers, vibration testers, incline impact machines, and compression testers—plays a critical role in accurately reproducing these conditions under laboratory settings. Proper selection and use of ISTA-compliant equipment enable manufacturers to reduce transportation damage, lower return costs, enhance packaging design, and improve customer confidence in product quality and logistics safety.
Understanding the Color Fastness To Washing Testing Machine GT-D07
The GESTER GT-D07 Color Fastness To Washing Testing Machine is designed to evaluate the color durability of dyed fabrics under washing and dry-cleaning conditions. By simulating real washing processes, it helps determine how resistant a fabric is to fading and staining, ensuring consistency, reliability, and compliance with international standards. With stainless-steel construction, safety features, and precise temperature and timing control, the GT-D07 provides an efficient and standardized testing solution for textile manufacturers worldwide.
How to Choose the Right DIN Abrasion Tester
This article provides a comprehensive guide to selecting the right DIN Abrasion Tester for material wear performance evaluation. It covers the instrument's function, applicable standards (including ISO 20344, DIN-53516, ISO 4649, ASTM D5963), key features like digital counter and auto-stop, application scope for rubber, tires, shoe soles, and conveyor belts, as well as quality, construction, brand considerations, and FAQs on troubleshooting. Ideal for laboratories, quality inspection departments, and material research institutions.
Glove Tester: Key Standards EN 388 & EN 407
Protective glove testing is the core link to verify hand safety protection performance for industrial PPE. This article focuses on the two most authoritative EU mandatory standards EN 388 and EN 407, elaborates on standardized test necessity, complete test items, professional supporting glove testers, result rating rules, and the differences between mechanical risk testing and thermal risk testing. It provides one-stop compliant testing reference for glove manufacturers, third-party testing labs, and safety supervision institutions to meet global CE certification and workplace safety production requirements.
GESTER International Co., Ltd. gains certificates of ISO 9001, 3A and SGS Audited supplier etc. with advanced design concept, excellent manufacturing technology and strict quality control.
WeChat
Contact us
Tel: +86-595-28886108 
Fax: +86-595-22515221
E-mail: sales10@gester-instruments.com,
                 info@gester-instruments.com
Mobile/Whatapp/ Wechat:  
             + 86(0)18059985379
Address:  Block 402,4th floor, f buliding, shengfulan business Center, no.577 jitai road, economic and  Technological development zone quanzhou of fujian.China.
Customer service
detect