Let's understand the pilling test of the fabric densitometer

This fabric densitometer is an instrument for measuring density. Accurate and fast measurement are its basic characteristics. At the same time, it can also be used for fuzzing and pilling tests. The process is relatively complicated, and every link needs to be paid attention to in order to ensure The final data is accurate.　　 Fabric densitometer fuzzing and pilling test: 　　1. Introduction by the manufacturer of the powerful machine The sample chuck of this instrument is a threaded chuck. When loading the sample, first unscrew the sample chuck cover, evenly cover the sample on the chuck sponge, and tighten the chuck cover. This instrument uses double grinding heads. During the test, both grinding head chucks need to clamp the sample, allowing direct friction between the sponge and the brush or abrasive.　　2. After the two clamps clamp the sample correctly and firmly, preset the number of frictions to the counter in accordance with the requirements of the standard GB/T 4802.1-1997. Select the sample weight according to the standard GB/T 4802.1-1997. The chuck and counterweight are already 490CN, and two 100CN and 190CN weights are provided. If you need to increase the weight, you can tighten the required weights between two. On the chuck.　　3. Put down the two sample holders to make the sample contact the surface of the brush and abrasive disc. Press the 'Start' button, the instrument will start to run, and do the fluffing (brush end) test. When the predetermined number of times is reached, the instrument will stop automatically.　　4. Lift the sample chuck beam gently, turn it 90°, and press it into the groove and drop it steadily. After preset the number of pilling frictions, press the “start” button again, the instrument will run, and the fuzzing and pilling (abrasive end) tests will be done at the same time. 5. The strong machine manufacturer introduces the fabric density meter pilling test: After the automatic shutdown, lift the ball chuck, remove the pilling sample, perform the rating, and then clamp the new sample, put down the chuck, and repeat the above process , Continue to experiment.

textile testing equipment tensile tester manufacturers, as the name suggests, find extensive use in tensile tester manufacturers institutions. Since tensile tester manufacturers has become much dependent on technology in today's world, there is wide use of such textile testing equipment.

Dazzle your next event with tensile tester manufacturers textile testing equipment and to buy best product， only trust GESTER International Co.,Limited.

We began investing in our workforce and negotiated deals with major suppliers and providers to lower the cost of equipment so the technicians could enhance the competitiveness of textile testing equipment right away.

With the help of a tensile tester manufacturers textile testing equipment, tensile tester manufacturers becomes a reasonably easy job that you can take care of simply and swiftly.

GESTER International Co.,Limited sells tensile tester manufacturers and yet their focus on operational excellence and mastery of distributed manufacturing facilities tensile tester manufacturers has made them the dominant player in the space.