loading

PPE Testing Equipment Manufacturer | Safety Equipment Testing Machines | GESTER


Products

Market analysis: the textile industry continues to be under pressure in 2017

Standard Group Textile Industry News: Market Analysis: The textile industry continues to be under pressure in 2016. Since last year, the textile industry's production has continued to decline, domestic consumption has continued to be sluggish, and exports have dropped overall compared to the previous year. In 2016, there were both positive factors such as the expected improvement of the global economy, and unfavorable factors such as the domestic macroeconomic downturn and sluggish domestic demand. However, overall, my country’s labor difficulties, overcapacity, environmental pressure and other issues will still restrict the development of the textile industry. The downward pressure on industrial production will continue to increase.    Production growth rate will decline further.    From the perspective of industrial added value growth rate, the textile industry added value increased by 6.6% in the first three quarters of 2015, and the growth rate continued to slow down, down 0.6 and 0.4 percentage points year-on-year respectively. In terms of different industries, the slowdown in the textile industry's growth rate was mainly due to the obvious decline in the textile, apparel and apparel industry, which only increased by 4.7% year-on-year, while the textile industry and chemical fiber manufacturing increased by 7.2% and 11.1% respectively. In terms of the output of main products, the growth rate of yarn has fallen, while the growth rate of chemical fiber and cloth has increased. In the first three quarters of 2015, chemical fiber, cloth and yarn increased by 10.9%, 3.3% and 4.7% year-on-year respectively.   Entering 2016, the downward pressure on the domestic economy has increased, the growth of consumer demand will also slow down, and the growth rate of textile industry production is not optimistic. From the perspective of the global economy, my country's textile industry exports will pick up. According to IMF forecasts, the global GDP growth rate in 2016 was 3.6%, 0.5 percentage points higher than in 2015. Among them, the EU, the United States and Japan, the key regions of my country’s textile exports, are expected to grow at 2.8%, 1.9% and 1.0 respectively in 2016. %, compared with 2015, there are different degrees of recovery. However, the focus of my country's textile industry growth lies in the country. The IMF predicts that my country's domestic economic growth in 2016 is expected to slow down by 0.5% compared with 2015.   The textile industry is facing the problem of overcapacity, and the surplus situation is increasing, especially the chemical fiber industry, which drags down the profitability of the textile industry. With the support of the policy, companies have expanded their factories and purchased equipment one after another. Most of the newly purchased equipment is imported world-class production equipment, and the company's production capacity and level have rapidly improved. However, under the background that the market demand structure is difficult to change in the short term, the rapid expansion of textile production, especially the launch of high-end production lines, has caused most high-end equipment to produce low-value-added products with low capacity utilization. According to investigations, among the first-class domestic and international cotton spinning production lines newly built by enterprises, the main products are still 30-40 yarns, and due to the market downturn, some enterprises have not fully started operations.  It is estimated that the growth rate of textile industry production in 2016 will drop to about 6.0%. Among them, benefiting from the decline in raw material prices and the rebound in export order growth, the production growth rate of the textile and chemical fiber industries will be higher than this year. However, the production growth rate of textile and apparel will be further reduced due to the sluggish domestic demand and high inventory factors.    Exports may show positive growth  In the first three quarters of 2015, my country’s exports were extremely pessimistic, reflecting the slowdown in the international economy and import demand, and increasing the variables of global economic and trade growth in 2016.   From January to September 2015, the export delivery value of the textile industry fell by 2.7% year-on-year, and the growth rate fell 5.6 and 4.8 percentage points from the same period last year and the whole year of last year. The export situation was more severe. Among the subdivided industries, exports of textile, textile and apparel, and chemical fiber industries all declined year-on-year, down 4.1, 1.0 and 8.7 percentage points respectively.   Entering 2016, my country's textile industry export growth rate will rebound, showing a positive growth trend. On the one hand, the economic situation of the three traditional export markets of the United States, the European Union, and Japan has improved, and import demand has increased. On the other hand, the economic growth of emerging countries and developing countries has increased, which has brought huge room for growth in my country's consumer goods exports. According to IMF forecasts, global import demand for goods increased by 4.1% in 2016, 1.2 percentage points higher than the growth rate in 2015. Among them, the demand for goods import in advanced economies, emerging markets and developing countries increased by 4.0% and 4.3%, respectively, higher than 2015. The annual growth rate was 0.3 and 2.8 percentage points.  It is predicted that the growth rate of export delivery value of the textile industry in 2016 will rebound to about 2%. The export growth rate of the three sub-sectors will rebound to a positive number, of which the export growth rate of the textile, apparel and apparel industry and chemical fiber industry will be more obvious. Investment growth slowed down In 2015, the temporary cotton purchasing and storage policy was withdrawn, and the accelerated depreciation policy was extended to the textile industry. Coupled with the acceleration of industrial transfer and other factors, the investment growth rate of the textile industry showed a trend of structural differentiation. Among them, textile industry, textile apparel and apparel Industry investment continued to grow at a high rate, and the chemical fiber industry continued to grow at a low rate. From January to September 2015, the investment in the textile industry, textile and clothing industry, and chemical fiber industry increased by 13.6%, 25.4% and 0.4% respectively year-on-year. Among them, the growth rate of investment in the textile industry and textile and clothing industry was 1.0 and 7.2 percentage points higher than that of last year. The chemical fiber industry was 2.1 percentage points lower than the same period last year.   Entering 2016, the scale of fixed asset investment in the textile industry will continue to expand, but due to poor market expectations, the investment growth rate will slow down. On the one hand, as my country's economic growth is in the three phases of 'growth speed shift period, structural adjustment pain period, and early-stage stimulus policy digestion periodOn the other hand, under the background of the new normal, the downward pressure on the macro economy has increased, the uncertainty and risks of investment in the textile industry have further increased, and the confidence of entrepreneurs is insufficient. 

The single most important quality you'll need as GESTER International Co.,Limited is 'stick-to-it-iveness' or grit, a combination of perseverance, patience and adaptability.

The guiding vision of GESTER International Co.,Limited is 'Bringing the best to everyone we touch'. By 'The best', we mean the best products, the best people and the best ideas.

Now that GESTER International Co.,Limited has become a leader in the space and have been able to scale appropriately, we are ready to expand to other cities.

GET IN TOUCH WITH Us
recommended articles
ISO 20345 vs ASTM F2413: Differences Between Safety Footwear Standards
ISO 20345 and ASTM F2413 are the two most recognized safety footwear standards used worldwide to evaluate protective footwear performance. Although both standards define minimum requirements for impact resistance and compression protection, differences in test energy levels, compression loads, marking systems, and hazard classifications can affect certification results. This article explains the key differences between ISO 20345 and ASTM F2413, helping footwear manufacturers, exporters, and quality control teams select the correct testing standard and improve compliance with international safety requirements.
Safety Footwear Tester Guide ISO 20346 with Buying Tips
This guide explains the ISO 20346 standard for general-purpose protective footwear, differentiates it from related ISO standards, and shares core buying tips for qualified safety footwear testers. It also introduces professional multi-standard compliant testing equipment for footwear quality control and compliance verification.
What is the Safety Footwear Impact Tester & Why are They Important in Safety Shoes Testing
A Safety Footwear Impact Tester evaluates the impact resistance of safety shoes by striking the steel toe cap with 100J/200J kinetic energy, ensuring compliance with global standards (EN ISO 20344, ASTM F2412). It’s critical for verifying product protection, facilitating certification, and optimizing safety shoe design. GESTER Instruments offers reliable, user-friendly testers trusted by manufacturers and labs worldwide.
Elmendorf Tearing Strength Tester GT-C11A You Should Know
The Elmendorf Tearing Strength Tester GT-C11A is a pivotal instrument for evaluating the tearing resistance of various materials, including textiles, non-wovens, paper, and films. Utilizing the proven pendulum method, it delivers precise, repeatable data crucial for quality assurance, product development, and compliance with international standards like ASTM and ISO. This article explores its working principle, key features such as automated testing and pneumatic clamping, and its wide-ranging applications across multiple industries, highlighting why the GT-C11A is a trusted choice for professionals seeking reliable and efficient material performance analysis.
What Are the ISTA Standard Tests and ISTA Testing Equipment?
ISTA (International Safe Transit Association) standard tests are globally recognized transportation packaging test procedures designed to evaluate the safety and reliability of products and their packaging throughout the logistics chain. By simulating real-world transportation conditions such as drops, vibration, impact, stacking, and compression, ISTA testing helps identify potential packaging weaknesses before products enter large-scale distribution. ISTA testing equipment—including drop testers, vibration testers, incline impact machines, and compression testers—plays a critical role in accurately reproducing these conditions under laboratory settings. Proper selection and use of ISTA-compliant equipment enable manufacturers to reduce transportation damage, lower return costs, enhance packaging design, and improve customer confidence in product quality and logistics safety.
Heat Contact Machine GT-C101-The Ultimate Selection Guide

The Heat Contact Machine GT-C101 is a specialized testing instrument designed for evaluating the heat resistance and thermal protective performance of gloves, protective clothing, and other heat-resistant materials used in high-temperature environments. In industries such as smelting, casting, welding, and glass manufacturing, workers are frequently exposed to intense heat, making accurate testing of contact heat resistance essential for ensuring safety and compliance.

GT-C101 simulates real working conditions by measuring heat transfer delay and thermal transmission under instant contact with high-temperature surfaces. Fully compliant with EN 407, EN 702, and ISO 12127-1 standards, this machine provides precise, repeatable data for manufacturers, laboratories, and research institutions. With high-temperature capability up to 500°C, advanced calorimetry, digital monitoring, and adjustable contact speed, the Heat Contact Machine GT-C101 is an indispensable tool for developing and certifying next-generation PPE and heat-insulation materials.
PPE Trends: Insights from a China Top PPE Testing Machine Company
As 2026 approaches, the global PPE industry is transformed by stricter industrial safety regulations, healthcare awareness, and evolving international standards (ISO/ASTM/EN). Key trends include the rise of Smart PPE, adoption of sustainable bio-based materials, and converging global compliance requirements—demanding high-precision, automated testing equipment with data traceability. GESTER International Co., Ltd., a China top PPE testing machine company with 25+ years of expertise, addresses these challenges through modular, standards-aligned solutions (e.g., TPP Thermal Protection Tester GT-RC02A, TDM Cut Test Machine GT-KC28) and long-term partnerships with SGS, TUV, and Intertek. Offering global technical support (installation, calibration, training) and automated, multi-standard-compatible equipment, GESTER empowers PPE manufacturers to meet 2026’s rigorous safety benchmarks. This article explores PPE performance evolution, 2026 industry trends, technological testing responses, and strategic procurement tips—emphasizing how China’s leading testing machine providers bridge hardware innovation with global compliance to protect human life. For professional PPE testing solutions, visit https://www.gesterinstruments.com/.
A Complete Guide to Martindale Testing by the Best Martindale Abrasion Tester Supplier
Durability is critical for textiles and footwear, and Martindale testing is the gold standard for measuring abrasion resistance and pilling performance. This guide dives into Martindale testing’s core mechanics (Lissajous figure multi-directional friction), strategies to boost testing accuracy (sample clamping, load calibration, abrasive standardization), and compliance with international standards (ISO 12947, ASTM D4966, EN). As a top Martindale abrasion tester supplier with 25+ years of expertise, GESTER International delivers high-precision instruments (Martindale Abrasion Tester GT-C13B, etc.) certified to ISO 9001 and trusted by SGS, Bureau Veritas, and other global testing institutes. Beyond machinery, GESTER offers global technical support, on-site installation, and calibration services. The guide also includes a procurement framework to help labs select tailored Martindale testing solutions. For reliable, standard-compliant durability testing, GESTER is your trusted partner.
Bally Resistance Flexing Tester – An Effective Method for Testing Material Flexing
The Bally Resistance Flexing Tester, also known as the Bally Leather Flexometer, is an essential testing instrument for evaluating the flex durability of leather, coated fabrics, synthetic leather, and textile materials. By accurately simulating repeated bending conditions encountered during actual use, the tester helps manufacturers assess material performance, prevent premature product failures, and meet international quality standards. This article explores the working principle, key benefits, applicable testing standards, and common specimen materials suitable for Bally flexing resistance testing.
PPE Testing Equipment: Complete Guide to Personal Protective Equipment Testing
PPE Testing Equipment is used to evaluate the safety, durability, and protective performance of personal protective equipment under controlled test conditions. This complete guide covers five major PPE testing categories: Safety Footwear Testing Equipment, Glove Testing Equipment, Protective Clothing Testing Equipment, Mask Testing Equipment, and Safety Helmet Testing Equipment. Learn about common PPE test methods, applicable standards, equipment types, laboratory requirements, and key factors to consider when selecting PPE Test Equipment for quality control, product development, certification, and laboratory applications.
GESTER International Co., Ltd. gains certificates of ISO 9001, 3A and SGS Audited supplier etc. with advanced design concept, excellent manufacturing technology and strict quality control.
WeChat
Contact us
Tel: +86-595-28886108 
Fax: +86-595-22515221
E-mail: sales10@gester-instruments.com,
                 info@gester-instruments.com
Mobile/Whatapp/ Wechat:  
             + 86(0)18059985379
Address:  No.15, Chifeng Road,Licheng Region, Quanzhou city of Fujian,PR China.
Customer service
detect