Ministry of Environmental Protection: Require car companies to disclose environmental protection information such as emission testing items and instruments
Not long ago, CNCA, the Ministry of Environmental Protection, and the Ministry of Public Security jointly issued the 'Notice on Further Standardizing Emission Inspections and Strengthening Motor Vehicle Environmental Supervision and Management' to further standardize motor vehicle emission inspections. The notice clarifies that the environmental protection department will no longer issue the environmental protection inspection mark of motor vehicles. In the future, the annual inspection mark on the windshield of the car will be changed from three to two. Recently, the Ministry of Environmental Protection issued the 'Announcement on the Disclosure of Environmental Protection Information for Motor Vehicles and Non-Road Mobile Machinery', which puts forward requirements for the disclosure of environmental protection information for car companies, and conducts inspections on environmental protection information. detailed instructions. The Ministry of Environmental Protection's motor vehicle and non-road mobile machinery environmental protection information disclosure platform has been in trial operation since September 1, 2016. The content of the announcement is as follows: Announcement on Launching Environmental Protection Information Disclosure of Motor Vehicles and Non-Road Mobile Machinery Systematized, scientific, legalized, refined and informatized, according to the decision-making requirements of the State Council on streamlining administration and delegating power, combining decentralization and regulation, optimizing services, and facilitating and benefiting the people, our ministry has decided to carry out new production of motor vehicles and off-road mobility in accordance with the law. Machinery environmental protection information disclosure work. The relevant requirements are hereby announced as follows: 1. Subjects of information disclosure According to the 'Air Pollution Prevention and Control Law', enterprises that manufacture and import motor vehicles and non-road mobile machinery shall disclose to the public the environmental protection of their production and import of motor vehicles and non-road mobile machinery. Information, including discharge inspection information and pollution control technical information, and is responsible for the authenticity, accuracy, timeliness and completeness of information disclosure. 2. Information disclosure content (1) Basic information of motor vehicles and non-road mobile machinery manufacturers and importers; (2) Technical information on pollution control of motor vehicles and non-road mobile machinery, see Annex 1 for details; (3) Motor vehicles and non-road mobile machinery Non-road mobile machinery emission inspection information: type inspection, production consistency inspection, in-use compliance inspection and ex-factory inspection information, including inspection results, inspection conditions, instruments and equipment, inspection agency information, etc. Please refer to Annex 2 for specific inspection items. 3. Information disclosure time and method (1) Motor vehicle manufacturers and importers shall disclose the main environmental protection information in the form of a vehicle list before the product leaves the factory or the goods enter the country. For specific requirements, see Annex 3. Manufacturers and importers of non-road mobile machinery should paste environmental protection information labels on obvious positions on the fuselage before the products leave the factory or the goods enter the country, and disclose the main environmental protection information. See Annex 4 for specific requirements. (2) Manufacturers and importers of motor vehicles and non-road mobile machinery shall disclose the environmental protection information of motor vehicles and non-road mobile machinery on the official website of the enterprise before the products leave the factory or the goods enter the country, and upload the motor vehicles and non-road mobile machinery to the Ministry of Environmental Protection simultaneously. The road mobile machinery environmental protection information disclosure platform (website: www.vecc-mep.org.cn) is available for inquiries by relevant government departments, the public and enterprises. Manufacturing and importing enterprises that do not have the conditions to disclose the environmental protection information of motor vehicles and non-road mobile machinery on the official website of the enterprise should publish the information on the environmental protection information disclosure platform of motor vehicles and non-road mobile machinery of the Ministry of Environmental Protection before the products leave the factory or the goods enter the country. Disclosure of environmental information. 4. Implementation time (1) From September 1, 2016, the environmental protection information disclosure platform for motor vehicles and non-road mobile machinery of the Ministry of Environmental Protection has started trial operation, and all relevant enterprises are invited to actively participate in the debugging. (2) From January 1, 2017, motor vehicle production and import enterprises shall disclose the environmental protection information of newly produced and imported motor vehicles in accordance with the time and method specified in Article 3 of this announcement. (3) From July 1, 2017, non-road mobile machinery production and import enterprises shall disclose the environmental protection information of newly produced and imported non-road mobile machinery in accordance with the time and method specified in Article 3 of this announcement. 5. Supervision and Management All provincial environmental protection authorities should establish a mechanism for verifying the inspection information of motor vehicles and non-road mobile machinery, and strengthen the supervision and management of the disclosure of environmental protection information of motor vehicles and non-road mobile machinery through on-site inspections, sampling inspections, etc. , and urge motor vehicle manufacturers and non-road mobile machinery manufacturers and importers to disclose information as required. The public is encouraged to supervise the environmental protection information disclosed by the production and import enterprises of motor vehicles and non-road mobile machinery, and report relevant issues through the environmental protection reporting platform in accordance with the law. For those who fail to disclose the environmental protection information of motor vehicles and non-road mobile machinery in a true, accurate, timely and complete manner according to the requirements of this announcement, the provincial environmental protection authorities shall punish the relevant enterprises in accordance with the 'Air Pollution Prevention and Control Law', and the punishment results must be timely. open to the public,And synchronously uploaded to the Ministry of Environmental Protection's motor vehicle and non-road mobile machinery environmental protection information disclosure platform. Our Ministry will increase supervision and inspection of the environmental protection information disclosure work of various motor vehicle and non-road mobile machinery production and import enterprises, as well as the supervision and enforcement of provincial environmental protection departments.
The Heat Contact Machine GT-C101 is a specialized testing instrument designed for evaluating the heat resistance and thermal protective performance of gloves, protective clothing, and other heat-resistant materials used in high-temperature environments. In industries such as smelting, casting, welding, and glass manufacturing, workers are frequently exposed to intense heat, making accurate testing of contact heat resistance essential for ensuring safety and compliance.
GT-C101 simulates real working conditions by measuring heat transfer delay and thermal transmission under instant contact with high-temperature surfaces. Fully compliant with EN 407, EN 702, and ISO 12127-1 standards, this machine provides precise, repeatable data for manufacturers, laboratories, and research institutions. With high-temperature capability up to 500°C, advanced calorimetry, digital monitoring, and adjustable contact speed, the Heat Contact Machine GT-C101 is an indispensable tool for developing and certifying next-generation PPE and heat-insulation materials.
Quick links
Products