Ministry of Environmental Protection: require car companies to disclose environmental protection information such as emission test items and instruments
Not long ago, the CNCA, the Ministry of Environmental Protection, and the Ministry of Public Security jointly issued the 'Notice on Further Regulating Emission Inspection and Strengthening the Environmental Supervision and Management of Motor Vehicles' to further standardize motor vehicle emission inspections. The notice clearly stated that the environmental protection department will no longer issue certification marks for environmental protection inspections of motor vehicles. In the future, the annual inspection marks on the windshield of automobiles will change from three to two. Recently, the Ministry of Environmental Protection issued the 'Announcement on the Disclosure of Environmental Information on Motor Vehicles and Non-Road Mobile MachineryA detailed description. The Ministry of Environmental Protection's environmental protection information disclosure platform for motor vehicles and non-road mobile machinery began trial operation on September 1, 2016. The content of the announcement is as follows: Announcement on the publication of environmental protection information for motor vehicles and non-road mobile machinery Guohuan Gui Qiqiang [2016] No. 3 is to implement the 'Air Pollution Prevention and Control Law' and accelerate the promotion of environmental management of motor vehicles and non-road mobile machinery Systematization, scientification, rule of law, refinement and informatization. In accordance with the State Council's decision and deployment requirements on streamlining administration and delegating power, combining decentralization, optimizing services, and benefiting the people, our ministry has decided to launch new production of motor vehicles and off-road mobility in accordance with the law. Disclosure of machinery environmental protection information. The relevant requirements are hereby announced as follows: 1. In accordance with the 'Air Pollution Prevention and Control LawInformation, including emission inspection information and pollution control technology information, and is responsible for the authenticity, accuracy, timeliness, and completeness of information disclosure. 2. Information disclosure content (1) Basic information of motor vehicle and non-road mobile machinery production and import enterprises; (2) Motor vehicle and non-road mobile machinery pollution control technical information, see Annex 1 for details; (3) Motor vehicles and Non-road mobile machinery emission inspection information: type inspection, production consistency inspection, in-use conformity inspection and factory inspection information, including inspection results, inspection conditions, equipment, testing organization information, etc. For specific inspection items, see Annex 2. 3. Time and method of information disclosure (1) Motor vehicle production and import companies shall disclose the main environmental protection information in the form of a vehicle list before the product leaves the factory or the goods enter the country. See Annex 3 for specific requirements. Non-road mobile machinery manufacturing and importing enterprises shall stick environmental information labels on obvious positions on the fuselage before the products leave the factory or before the goods enter the country, and disclose the main environmental information. See Annex 4 for specific requirements. (2) Enterprises producing and importing motor vehicles and non-road mobile machinery shall publish the environmental protection information of motor vehicles and non-road mobile machinery on the official website of the company before the products leave the factory or the goods enter the country, and upload it to the Ministry of Environmental Protection for motor vehicles and non-road mobile machinery. The environmental protection information disclosure platform of road mobile machinery (website: www.vecc-mep.org.cn) is available for inquiries by relevant government departments, the public and enterprises. Manufacturers and importers that do not currently have the conditions to disclose the environmental protection information of motor vehicles and non-road mobile machinery on the official website of the company shall report on the Ministry of Environmental Protection's environmental protection information disclosure platform for motor vehicles and non-road mobile machinery before the products leave the factory or the goods enter the country. Disclosure of environmental protection information. Four. Implementation time (1) Since September 1, 2016, the Ministry of Environmental Protection's environmental protection information disclosure platform for motor vehicles and non-road mobile machinery has begun trial operation. All relevant enterprises are invited to actively participate in the commissioning. (2) Starting from January 1, 2017, motor vehicle manufacturers and importers shall disclose the environmental protection information of newly produced and imported motor vehicles in accordance with the time and method specified in Article 3 of this Announcement. (3) Starting from July 1, 2017, non-road mobile machinery manufacturers and importers shall disclose the environmental protection information of newly produced and imported non-road mobile machinery in accordance with the time and method specified in Article 3 of this announcement. 5. Supervision and management. Provincial environmental protection authorities should establish inspection information verification mechanisms for motor vehicles and non-road mobile machinery, and strengthen the supervision and management of environmental protection information disclosure of motor vehicles and non-road mobile machinery through on-site inspections and sample inspections. , Supervise and urge motor vehicle manufacturers and non-road mobile machinery manufacturers and import companies to disclose information as required. Encourage the public to supervise the environmental protection information disclosed by motor vehicle and non-road mobile machinery production and import companies, and report relevant issues through the environmental protection reporting platform in accordance with the law, and all provincial environmental protection authorities shall promptly investigate and deal with the reported problems. If the environmental protection information of motor vehicles and non-road mobile machinery is not disclosed in a true, accurate, timely and complete manner in accordance with the requirements of this Announcement, the provincial environmental protection authorities shall impose penalties on the relevant enterprises in accordance with the Air Pollution Prevention and Control Law, and the penalties shall be timely. Open to the public and simultaneously upload to the Ministry of Environmental Protection's environmental protection information disclosure platform for motor vehicles and non-road mobile machinery.
GESTER International Co.,Limited highlighted the need to foster a human openness to technological innovation.
Looking for someone to handle your textile testing equipment tensile tester manufacturers needs? Check out GESTER Instruments today for more information.
So, what's a manufacturer to do? Familiarize ourselves with producing textile testing equipment in various technologies.
Cut resistance is one of the most critical performance indicators in personal protective equipment (PPE) testing, directly affecting worker safety in high-risk industries such as metal processing, machinery manufacturing, and emergency rescue. The TDM Cut Test Machine GT-KC28 plays a vital role in accurately evaluating the cut resistance of PPE products, including gloves, protective clothing, footwear materials, composite materials, rubber, and industrial textiles.
By adopting high-precision force control systems, intelligent data processing, and stable transmission technology, the GT-KC28 TDM Cut Tester can accurately measure the critical cutting force of materials and ensure excellent repeatability and comparability of test results. Its user-friendly touch-screen operation, comprehensive data storage, USB data export, and built-in thermal printer greatly improve laboratory efficiency and data traceability.
The TDM Cut Test Machine GT-KC28 fully complies with major international and national standards such as ISO 13997, EN 388, ASTM F2992/F2992M, ANSI/ISEA 105, and GB 24541-2022, making it a reliable solution for PPE manufacturers, third-party testing laboratories, and research institutions. Through precise and standardized cut resistance testing, the GT-KC28 helps reduce industrial cutting injuries, supports PPE certification across global markets, and ensures that protective equipment delivers reliable safety performance in real-world applications.
Quick links
Products