loading

Gester Instruments | Professional Glove, Mask, Safety Helmet, Protective Clothing & Footwear Testing Equipment Manufacturer Since 1997


Products
Test Standard

my country's textile industry will focus on planning during the 13th Five-Year Plan

Standard Group Textile Industry Information: my country's textile industry will focus on planning during the '13th Five-Year Plan' period. As a socialist market economy, China will launch an economic plan every five years to clarify the indicators and reform directions for economic and social development in the next five years. At the end of October last year, the Fifth Plenary Session of the Eighteenth Central Committee of the Communist Party of China adopted the 13th Five-Year Plan for China’s National Economic and Social Development (referred to as the “13th Five-Year Plan”). The primary task of building a well-off society. To accomplish this task, China’s economy must maintain a “medium-to-high-speed growth” level in the next five years. GDP will double by 2020 compared to ten years ago, reaching approximately US$12 trillion (approximately 78.6 trillion US dollars). Yuan Renminbi). The media pointed out that China’s economy is facing downward pressure. Last year’s GDP growth rate was only 6.9%. The official stated earlier that to achieve the goal of doubling GDP, China’s average annual economic growth rate in the next five years must be maintained at 6.5%. Bottom line. Wang Jianhui, deputy director of the Beijing Capital Securities Research Institute, analyzed that although it is inevitable to set GDP figures, the 13th Five-Year Plan as a whole is not expected to rely excessively on the formulation of goals, but will focus on solving difficult problems in China’s economy and society. . For example, the Chinese economy is facing the problem of overcapacity, and supply-side reform is the solution. He said that efforts to curb outdated production capacity have now been extended to the production lines of mainstream suppliers. This means that some first-line steel mills or enterprises have to cut production lines. Wang Jianhui said: “In the past, local small and medium-sized enterprises were involved, but now some state-owned enterprises are affected. The task is even more difficult and complicated. De-capacity does not mean closing the factory. There are also asset disposal, personnel training, job transfer, and renewal. Employment and subsequent debt issues are definitely more difficult than before.” Zong Liang, deputy general manager of the Strategic Development Department of Bank of China, pointed out that supply-side reform is a long-term goal. In the short and medium term, the authorities should also moderately expand aggregate demand to improve the economy. It can continue to grow within a reasonable range, creating favorable conditions for structural adjustment and optimization. This includes promoting the development of urbanization, exploring consumer market demand, and promoting the construction of the 'Belt and Road'.     Five of the overall goals are indispensable.      In addition to economic issues, Wang Jun, deputy director of the Consulting and Research Department of the China Center for International Economic Exchange, believes that this year's plan should draw up a set of comprehensive survey indicators to measure overall social development. He said: 'We are now not only focusing on GDP growth and total volume, but also focusing on the five development concepts of innovation, coordination, green, openness and sharing. This is an overall goal, and none of the five is indispensable.'     , for example, is common with economic development. The problem is the destruction of the ecological environment. Yuan Xin, a professor at the Institute of Population and Development of Nankai University, said that in the past 30 years, China has repeated the old path of first pollution and then governance in developed countries. Now it finally realizes that if it wants gold and silver mountains, it also wants green waters and mountains, economic growth cannot be achieved. At the expense of the environment. It is understood that the draft of the '13th Five-Year Plan' will list specific indicators for air pollution levels and water quality. Yuan Xin said: 'The green development and ecological civilization proposed in the 13th Five-Year Plan have raised the quality of economic growth to a new level. I think this is very important.' In terms of people’s livelihood, planning recommendations, by 2020, people’s lives The level and quality should be generally improved, the employment, education, culture, social security, medical, housing and other public service systems should be more complete, and the implementation of 'precise poverty alleviation and precision poverty alleviation' should be implemented to improve the effectiveness of poverty alleviation by implementing policies based on individual conditions.     The Central Poverty Alleviation and Development Work Conference in November last year promised that by 2020, more than 70 million rural poor people in China will be lifted out of poverty as scheduled, and all key counties will be eliminated. Wang Jun explained that no matter how developed the country's economy is, the results of development will eventually trickle down to ordinary people, which is the perfect ending.     The Politburo of the Communist Party of China held a meeting on the 22nd of last month to review the draft of the '13th Five-Year Plan' plan. The draft is expected to be reviewed and approved at the National Two Sessions starting this week.    The 'hole card' of stimulating the economy has been turned over. The Chinese government is facing more difficult challenges than in previous years.      The media analysis believes that the 'hole card' that helps economic development has almost been turned over, the current Chinese government is facing even more difficult challenges than in previous years. Therefore, if this leader can complete the '13th Five-Year Plan' tasks as scheduled, his historical achievements will be more distinctive.    Wang Jianhui said that although China’s past few governments have faced specific challenges during the ruling period, including high inflation, deflation, real estate bubbles, and the international financial crisis, on the whole, they have completed the tasks assigned to them by history as scheduled. This is because they have all undertaken the undeveloped resources left behind by the previous government as the driving force for economic growth.

GESTER International Co.,Limited is experienced in producing tensile tester manufacturers textile testing equipment products featuring topnotch quality with ODM services available. Welcome to visit our site at GESTER Instruments.

GESTER International Co.,Limited is a rapidly growing Manufacturing Company based in China. We offer a wide range of equipment that helps in tensile tester manufacturers which are safe, durable and economical. We provide textile testing equipment, tensile tester manufacturers, tensile tester manufacturers,etc. more about and textile testing equipment solutions are covered in GESTER Instruments. Take a visit!

GESTER International Co.,Limited has never compromised on the quality and the services provided to the customer.

GESTER International Co.,Limited offer various lines of products in line with international standards along with professionals who can offer suitable solutions pertaining to the existing problem in tensile tester manufacturers textile testing equipment.

GET IN TOUCH WITH Us
recommended articles
Leather Industry Innovations: GESTER at ACLE as a Footwear Testing Equipment Factory
The global leather and footwear industry is shifting toward prioritizing durability, material integrity, and functional excellence—driving demand for high-precision testing equipment. As a highlight of ACLE 2026 (All China Leather Exhibition), GESTER International Co., Ltd., a 25+ year footwear testing equipment factory, showcases innovative solutions tailored to this trend. Trusted by leading testing institutes like SGS, TUV, and Intertek, GESTER’s product lineup includes the Martindale Abrasion Tester (for surface durability), Tension Testing Machine (for mechanical properties), and Safety Shoe Cutting Tester—all compliant with ISO, ASTM, and EN standards. These instruments integrate automation (PLC systems) and data traceability to reduce human error, support ISO 9001 compliance, and streamline laboratory efficiency. With a global service network spanning 160+ countries, GESTER offers on-site installation, calibration, and software updates to ensure long-term usability. The article also outlines strategic procurement tips for manufacturers, emphasizing modular design, standard compatibility, and supplier track records. For leather and footwear brands seeking to enhance product reliability, avoid recalls, and stay competitive, GESTER’s ACLE 2026 innovations and end-to-end support provide a definitive quality assurance solution.
Mask Testing Equipment: Everything You Need to Know
This article comprehensively introduces mask testing equipment, including its definition, application significance, core international testing standards, main equipment types and functional characteristics. It also puts forward a step-by-step selection guide and common selection misunderstandings, providing a reference for mask manufacturers, third-party testing institutions and regulatory departments to select appropriate testing equipment, so as to ensure mask product quality, pass international certification and protect user safety.
A Complete Guide to Martindale Testing by the Best Martindale Abrasion Tester Supplier
Durability is critical for textiles and footwear, and Martindale testing is the gold standard for measuring abrasion resistance and pilling performance. This guide dives into Martindale testing’s core mechanics (Lissajous figure multi-directional friction), strategies to boost testing accuracy (sample clamping, load calibration, abrasive standardization), and compliance with international standards (ISO 12947, ASTM D4966, EN). As a top Martindale abrasion tester supplier with 25+ years of expertise, GESTER International delivers high-precision instruments (Martindale Abrasion Tester GT-C13B, etc.) certified to ISO 9001 and trusted by SGS, Bureau Veritas, and other global testing institutes. Beyond machinery, GESTER offers global technical support, on-site installation, and calibration services. The guide also includes a procurement framework to help labs select tailored Martindale testing solutions. For reliable, standard-compliant durability testing, GESTER is your trusted partner.
Why TDM Cut Test Machine GT-KC28 Is Needed in PPE Testing

Cut resistance is one of the most critical performance indicators in personal protective equipment (PPE) testing, directly affecting worker safety in high-risk industries such as metal processing, machinery manufacturing, and emergency rescue. The TDM Cut Test Machine GT-KC28 plays a vital role in accurately evaluating the cut resistance of PPE products, including gloves, protective clothing, footwear materials, composite materials, rubber, and industrial textiles.

By adopting high-precision force control systems, intelligent data processing, and stable transmission technology, the GT-KC28 TDM Cut Tester can accurately measure the critical cutting force of materials and ensure excellent repeatability and comparability of test results. Its user-friendly touch-screen operation, comprehensive data storage, USB data export, and built-in thermal printer greatly improve laboratory efficiency and data traceability.

The TDM Cut Test Machine GT-KC28 fully complies with major international and national standards such as ISO 13997, EN 388, ASTM F2992/F2992M, ANSI/ISEA 105, and GB 24541-2022, making it a reliable solution for PPE manufacturers, third-party testing laboratories, and research institutions. Through precise and standardized cut resistance testing, the GT-KC28 helps reduce industrial cutting injuries, supports PPE certification across global markets, and ensures that protective equipment delivers reliable safety performance in real-world applications.
How to Choose Light Fastness Tester: Water-Cooled and Air-Cooled
Choosing between water-cooled and air-cooled light fastness testers depends on precision needs, budget, and application. Water-cooled testers (like GESTER GT-3000) offer superior spectral accuracy and stability for rigorous standards (e.g., automotive, coatings). Air-cooled models (like GESTER GT-D02A-1) provide energy efficiency and easier installation for routine QC. This guide compares cooling methods, features, and applications to help you select the optimal tester.
Understanding the Color Fastness To Washing Testing Machine GT-D07
The GESTER GT-D07 Color Fastness To Washing Testing Machine is designed to evaluate the color durability of dyed fabrics under washing and dry-cleaning conditions. By simulating real washing processes, it helps determine how resistant a fabric is to fading and staining, ensuring consistency, reliability, and compliance with international standards. With stainless-steel construction, safety features, and precise temperature and timing control, the GT-D07 provides an efficient and standardized testing solution for textile manufacturers worldwide.
Universal Testing Machine Dual Column GT-K01: A Reliable Solution for footwear Testing
The Universal Testing Machine Dual Column GT-K01 is a high-precision mechanical testing instrument widely used in the footwear industry to evaluate tensile, compression, bending, tearing, and bonding strength of various materials. With advanced servo control, high-accuracy displacement measurement, and compliance with multiple international testing standards such as SATRA, ASTM, ISO, and BS, the GT-K01 footwear universal testing machine provides reliable data for quality control, material research, and product certification. This article explores the working capabilities, structural features, and practical value of the GT-K01 universal testing machine in footwear testing and manufacturing processes.
PPE Trends: Insights from a China Top PPE Testing Machine Company
As 2026 approaches, the global PPE industry is transformed by stricter industrial safety regulations, healthcare awareness, and evolving international standards (ISO/ASTM/EN). Key trends include the rise of Smart PPE, adoption of sustainable bio-based materials, and converging global compliance requirements—demanding high-precision, automated testing equipment with data traceability. GESTER International Co., Ltd., a China top PPE testing machine company with 25+ years of expertise, addresses these challenges through modular, standards-aligned solutions (e.g., TPP Thermal Protection Tester GT-RC02A, TDM Cut Test Machine GT-KC28) and long-term partnerships with SGS, TUV, and Intertek. Offering global technical support (installation, calibration, training) and automated, multi-standard-compatible equipment, GESTER empowers PPE manufacturers to meet 2026’s rigorous safety benchmarks. This article explores PPE performance evolution, 2026 industry trends, technological testing responses, and strategic procurement tips—emphasizing how China’s leading testing machine providers bridge hardware innovation with global compliance to protect human life. For professional PPE testing solutions, visit https://www.gesterinstruments.com/.
How to Test Firefighter Turnout Gear Thermal Protection?
Firefighter turnout gear plays a critical role in protecting firefighters operating in extreme environments involving high temperatures, flames, radiant heat, and convective heat. Its thermal protective performance directly affects firefighter safety and survival during fireground operations. This article explains how to test firefighter turnout gear thermal protection through Thermal Protective Performance (TPP) testing. It introduces the scientific principle based on the Stoll curve, outlines key influencing factors such as heat flux intensity and exposure time, and reviews internationally recognized standards including NFPA 1971 and ISO 17492. The article also highlights the testing advantages of the GT-RC02 TPP Thermal Protection Tester, which provides accurate, stable, and standards-compliant evaluation of flame-retardant protective clothing materials under combined radiant and convective heat exposure.
 Fabric Pilling Test: How to Choose the Right ICI Pilling Box Tester GT-C18
Fabric pilling directly affects the appearance, durability, and perceived quality of textile products. With global textile brands enforcing stricter testing standards, reliable laboratory testing equipment has become essential for manufacturers. This article explores how fabric pilling tests are conducted and why textile laboratories increasingly invest in professional ICI pilling box testers such as the GT-C18. It explains the advantages of in-house testing, international compliance requirements, key machine components, and important parameters buyers should evaluate before purchasing a pilling tester. By selecting the right equipment, textile companies can achieve faster quality verification, reduce dependence on third-party laboratories, and ensure their fabrics consistently meet international market standards.
no data
Quanzhou Gester International Co.,Ltd gains certificates of ISO 9001, 3A and SGS Audited supplier etc. with advanced design concept, excellent manufacturing technology and strict quality control.
WeChat
Contact us
Tel: +86-595-28886108 
Fax: +86-595-22515221
E-mail: sales10@gester-instruments.com,
                 info@gester-instruments.com
Mobile/Whatapp/ Wechat:  
             + 86(0)18059985379
Address:  Block 402,4th floor, f buliding, shengfulan business Center, no.577 jitai road, economic and  Technological development zone quanzhou of fujian.China.
Customer service
detect