National Instruments at the 2016 Automotive Testing and Quality Control Expo
NI (National Instruments, referred to as NI), as a supplier dedicated to providing engineers and scientists with solutions to help them meet the world's most severe engineering challenges, recently joined a number of industry senior partners to jointly debut in 2016 Automotive Test and Quality Monitoring Expo, which focused on displaying its test platform and solutions in the field of intelligent networked vehicles and GM testing, providing flexible, reliable and open technical support for China's automobile manufacturing to move towards intelligent and sustainable development. According to the '2016 China Automobile Industry Development Report' issued by the Development Research Center of the State Council, China's automobile industry is experiencing innovative breakthroughs, and intelligence has formed an all-round impact on China's automobile industry chain, and it is clear that intelligent networked vehicles are automotive intelligent products. the best form. However, with the development of intelligent vehicles, the electronic devices used are also increasingly complex, which makes the whole development process from conception to production full of challenges. As a global leader in the field of automotive test and measurement, NI provides intelligent, flexible, and reliable test platforms and solutions for ICVs, which can fully cover the full-cycle testing of automotive products, helping automotive manufacturers to effectively improve test development efficiency and reduce cost of testing. NI, together with its professional partners in the automotive electronics test industry, Suzhou Lingchuang Ruidi Measurement and Control Technology Co., Ltd., Averna Company, Wico Company and Conrad Technology, focused on demonstrating its flexible, flexible, and reliable solutions for ICV and GM testing. Reliable test platform and solutions. At present, NI's products involve rapid prototyping control, automotive terminal testing, TEST Cell measurement and control, hardware-in-the-loop, on-board testing and recording and other major fields. During development, NI helps automotive engineers reuse test components such as user interface components, stimulus profiles, and simulation models, increasing efficiency and reducing costs. At the same time, automotive engineers can take full advantage of a flexible, future-proof and adaptable smart vehicle HIL test system built on the PXI platform, significantly reducing development time. In addition, automotive engineers can take advantage of the powerful and flexible NI modular PXI platform to test the device under test. At this expo, NI brought the following products: PXI platform-based in-vehicle infotainment system mmWave automotive radar test and simulation IoV OBU detection equipment Smart car HIL test system“according to ‘Made in China 2025’Strategy, intelligent networked vehicles will be included in the key areas of national intelligent manufacturing development in the next ten years. NI hopes to fully demonstrate its cutting-edge technologies in intelligent networked vehicles and full-cycle testing of automotive products through this exhibition.” Chen Jianzhong, Sales Director of NI Greater China, said,“In the future, NI will, as always, focus on the research and development of an open platform that can cover the entire process of automobile production from prototype construction to production testing, aiming at the needs and application directions of users in the industry, providing more complete and cutting-edge technology testing solutions to help Chinese automobiles Intelligent development.”
GESTER International Co.,Limited devises a regular, independent, transparent and objective assessment mechanism to evaluate country performance.
To live healthy, you need to eat healthy; to eat healthy, you need to think healthy; to think healthy, you need to read health; to read healthy, you need to follow GESTER Instruments.
comes in a vast array of styles and tensile tester manufacturers depending on which tensile tester manufacturersis used.
Personal protective equipment must meet specific performance requirements before it can be used in demanding workplace environments. ISO, EN, and ASTM standards provide important test methods and performance requirements for different PPE categories. However, the applicable standard depends on the product, intended application, target market, and specific protection requirements.
This guide explains the role of ISO, EN, and ASTM standards in PPE testing and introduces common requirements for safety footwear, protective gloves, protective clothing, masks, and safety helmets. It also explains how laboratories can select suitable PPE testing equipment according to the applicable test method.
The Heat Contact Machine GT-C101 is a specialized testing instrument designed for evaluating the heat resistance and thermal protective performance of gloves, protective clothing, and other heat-resistant materials used in high-temperature environments. In industries such as smelting, casting, welding, and glass manufacturing, workers are frequently exposed to intense heat, making accurate testing of contact heat resistance essential for ensuring safety and compliance.
GT-C101 simulates real working conditions by measuring heat transfer delay and thermal transmission under instant contact with high-temperature surfaces. Fully compliant with EN 407, EN 702, and ISO 12127-1 standards, this machine provides precise, repeatable data for manufacturers, laboratories, and research institutions. With high-temperature capability up to 500°C, advanced calorimetry, digital monitoring, and adjustable contact speed, the Heat Contact Machine GT-C101 is an indispensable tool for developing and certifying next-generation PPE and heat-insulation materials.
Quick links
Products