Operation steps of the surface moisture resistance tester for medical masks

The surface moisture resistance testing-equipment' target='_blank'>tester for medical masks is used to detect the water repellency of masks, fabrics and other materials, and to evaluate their surface moisture resistance. (Hong Kong) Co., Ltd. is the manufacturer, welcome to inquire. The engineer said that the water repellency of the fabric surface was assessed by comparing the surface of the sample with a standard chart. The equipment included a metal frame that allowed distilled water to be sprayed through a nozzle to the sample at 45°and 150 mm below the nozzle to compare the appearance of the specimen with the optional photographic scale. Applicable standards: ISO 4920, BS EN 24920, BS 3702, GB/T 4745, AATCC 22, M&S P23, NEXT 23 Operation steps: 1. Put the sample on a metal ring with a diameter of 152mm, with the front side facing up, to ensure that the surface is flat and wrinkle-free. 2. Place the metal ring with the sample on the stage of the tester, pay attention to the position of the sample when placing it, and ensure that the center of the sample ring is exactly aligned with the center of the spray pattern ring. For some twill, bead or similar striped structures, when placing the sample ring on the stage, the direction of the stripes should be placed diagonally to the direction of water flow. 3. Put 250ml at a temperature of 27±Pour deionized water at 1°C into the funnel of the tester and let it spray over the sample for 25-30 seconds. When pouring deionized water, the beaker should not touch the funnel. If the funnel moves, it will change the spray pattern and shape of the sample. The spray time must be between 25-30 seconds, otherwise the nozzle must be checked to see if its holes are getting larger or blocked. 4. Hold one side of the sample ring, turn the sample face down, tap the other side quickly towards a hard object, and then rotate the sample horizontally by 180°°, hold the original tap and tap the original grip again quickly to knock off the unwetted water droplets on the surface of the sample.

GESTER International Co.,Limited has an array of branches in domestic for servicing customers with high-quality products.

We are an experienced supplier of and have gained good reputaion among global customers. With a wide range of in offer, we can customize according to your requirement. Send us your enquiry at GESTER Instruments.

Visit GESTER Instruments for the best in tensile tester manufacturers textile testing equipment supplies and get the most cost effective for your textile testing equipment solution. Design and customization are also welcomed.