loading

PPE Testing Equipment Manufacturer | Safety Equipment Testing Machines | GESTER


Products

opportunity? risk? 2018 status analysis and prospect forecast of hazardous waste industry

In recent years, with the continuous introduction of hazardous waste policies, supervision has gradually strengthened, and the popularity of the hazardous waste market has increased, which has attracted the attention of many people. Under the heavy pressure of inspectors, illegal disposal of hazardous waste will face criminal penalties, which will lead to the accelerated release of hazardous waste disposal requirements. With a market size of 200 billion yuan and a gross profit margin of 50%, many people are eager to try these data. So what is the actual situation? Analysis of Hazardous Waste Supply and Demand Status Quo of Hazardous Waste Generation Industrial industry is the main source of hazardous waste in my country. According to the 2017 China Statistical Yearbook, the national industrial hazardous waste generated in 2016 was 53.473 million tons, a year-on-year increase of 34.49%. (Data source: China Statistical Yearbook) Among them, Shandong produces the largest amount of hazardous waste, as high as 11.88228 million tons, followed by Qinghai with 4,620,500 tons, and Jiangsu with 3.5098 million tons of hazardous waste, ranking third. (Data source: China Statistical Yearbook) However, due to under-reporting, concealing, and private disposal of enterprises, a large part of hazardous waste is not included in the statistics. At present, there is a big gap between domestic hazardous waste production and environmental statistics. Developed countries started early in the field of hazardous waste management, and their policies and supervision are more complete. Therefore, statistics on hazardous waste are more accurate and scientific. The United States, Japan, the United Kingdom and other countries accounted for more than 5% of hazardous waste and solid waste. South Korea’s hazardous waste and solid waste accounted for 4%. In 2016, my country’s hazardous waste and solid waste accounted for only 1.7%, which is far lower. At the level of developed countries, the actual output of hazardous waste in my country should be much higher than statistical data. According to calculations based on the output of 100 million yuan of GDP and the proportion of hazardous waste in solid waste, the actual output of hazardous waste in my country can be as high as 80 million to 100 million tons. The 2017 China Statistical Yearbook of Hazardous Waste Disposal shows that in 2016, the amount of industrial hazardous waste handled was 44.2951 million tons, of which 28.2371 million tons were comprehensively utilized, 16.058 million tons were processed, and the comprehensive disposal rate was 82.83%. However, because the amount of hazardous waste used in some areas includes the use of storage in previous years, and some companies have not strictly declared, the data on the disposal rate is relatively high. (Data source: China Statistical Yearbook) Among them, Qinghai has the lowest disposal rate, with only 8.3%, and the disposal rates in Zhejiang and Tianjin all exceed 100%. As of 2016, there were 2,195 licensees for hazardous waste operations nationwide, and the approved business scale reached 64.71 million tons, with an average of about 29,000 tons per company. But the actual operating scale is 16.29 million tons, with an average of less than 75,000 tons per company. The top three in terms of actual business scale are Zhejiang, Shandong and Guangdong. (Data source: 2017 National Annual Report on the Prevention and Control of Environmental Pollution by Solid Waste in Large and Medium-sized Cities) The actual operating scale is seriously lower than the approved operating scale. The reasons are mainly twofold. First, the disposal capacity of hazardous waste enterprises is low, the disposal qualifications are relatively single, and the types of supply and demand do not match. There are many types of hazardous waste, and different types of hazardous waste require different disposal technologies and disposal qualifications. There are still problems in the market that some hazardous waste treatment companies 'cannot eat enoughAccording to statistics, 62% of the companies currently qualified for hazardous waste treatment can only handle 1-10 types of hazardous waste, and only 1% can handle more than 25 types of hazardous waste. Moreover, due to factors such as the environmental impact assessment and the long construction period, a large number of hazardous waste enterprises have no actual disposal capacity although they have operating permits. The second is that the hazardous waste treatment radius is short, inter-provincial transfer requires approval, and the regionality is extremely strong. More than 50% of the treatment capacity is concentrated in the eastern region. There is a serious imbalance between the amount of hazardous waste generated and the treatment capacity of each province. Hazardous waste industry prospect forecast market space In January 2018, the Environmental Protection Tax Law was formally implemented, which stipulates that if waste production enterprises use hazardous waste that does not meet the standards, an environmental tax of 1,000 yuan per ton of hazardous waste will be paid. In addition, environmental protection inspectors will also start the 'return to the carbine' mode. The government will increase the cost of environmental violations and at the same time strengthen illegal supervision. The hazardous waste industry will quickly release demand in the next few years. It is estimated that the production of hazardous waste in 2020 may reach 100 million tons. According to the disposal price of 2500 yuan/ton, the market size will exceed 200 billion. Potential places in Shandong, Sichuan and other places have a large production of hazardous waste, but there are not enough hazardous waste disposal facilities in the local area, supply and demand are seriously imbalanced, there are many new hazardous waste projects that need to be built, and there is great potential for development. During the 13th Five-Year Plan, Shandong plans to invest 53 billion yuan and build a total of 353 hazardous waste disposal projects. Sichuan Province plans to build at least 13 hazardous waste centralized disposal facility projects in the province after five years, with a hazardous waste disposal capacity of 731,600 tons per year. Beijing, Shanghai and other places have developed economies and the hazardous waste disposal market is relatively mature, and there is almost no room for new projects. Jiangsu, Zhejiang and other places produce large amounts of hazardous waste, and there are also many disposal companies. With the increase in market concentration, small companies will gradually decrease and the market structure will change. Industry Trends At present, my country’s hazardous waste disposal capacity is scattered. Large companies (Eastern Gardens, Dongjiang Environmental Protection, Shenzhen Hazardous Waste Treatment Station, Veolia and Guangzhou Luyou, etc.) have a market share of less than 10%. Most companies have relatively low disposal capabilities. Each company has a processing capacity of less than 30,000 tons, and the industry is characterized by 'small, scattered and chaotic'. In the future, with the improvement of the standardization of the hazardous waste market and the strengthening of government supervision, small companies will face the dual dilemma of increased costs, thinning of profits, and increased capital requirements for upgrading and transformation of treatment facilities, and will gradually be eliminated by the market or merged by large companies .

GET IN TOUCH WITH Us
recommended articles
Glove Tester: Key Standards EN 388 & EN 407
Protective glove testing is the core link to verify hand safety protection performance for industrial PPE. This article focuses on the two most authoritative EU mandatory standards EN 388 and EN 407, elaborates on standardized test necessity, complete test items, professional supporting glove testers, result rating rules, and the differences between mechanical risk testing and thermal risk testing. It provides one-stop compliant testing reference for glove manufacturers, third-party testing labs, and safety supervision institutions to meet global CE certification and workplace safety production requirements.
10 Benefits of GESTER PPE Testing Equipment You Need to Know
Choosing PPE testing equipment requires more than comparing machine prices. Measurement accuracy, test repeatability, applicable standards, fixture design, automation, calibration, customization and technical support can directly affect laboratory efficiency and testing reliability. GESTER provides integrated PPE testing solutions covering safety footwear, protective gloves, protective clothing, masks and safety helmets. This article explains 10 technical advantages to consider when comparing GESTER PPE Testing Equipment with alternative suppliers.
Why GESTER Ranks as a Leading TPP Thermal Protective Performance Tester Exporter
As a trusted leading TPP Thermal Protective Performance Tester exporter, GESTER International Co., Ltd. brings 25+ years of R&D and manufacturing expertise to PPE safety testing. Our flagship GT-RC02 series TPP testers feature advanced dual-source thermal simulation, high-sensitivity sensors, and full digital automation—delivering precise, repeatable data to evaluate thermal protection for firefighter and industrial protective clothing. Fully compliant with global standards (NFPA 1971, EN 469, ISO), GESTER’s equipment is trusted by SGS, Intertek, and top testing institutes worldwide. Backed by ISO 9001 certification, global service in 160+ countries, and professional calibration support, we empower manufacturers and labs to meet stringent safety regulations and ensure life-saving thermal protection. Discover tailored TPP testing solutions for PPE excellence at GESTER.
PPE Testing Laboratory Equipment List
Setting up a PPE testing laboratory requires the right combination of instruments for safety footwear, gloves, protective clothing, masks and safety helmets. This guide explains the core testing equipment used in modern PPE laboratories, the standards they support, and the functions of each instrument, helping manufacturers, third-party laboratories and certification bodies choose a reliable and compliant testing setup.
How to Choose the Right Glove Testing Equipment
Choosing the right glove testing equipment is essential for evaluating the safety, durability, and protective performance of gloves. This guide explains the main types of glove testing equipment, including thermal protection, cut and abrasion resistance, tensile strength, and environmental conditioning equipment. It also introduces key glove testing standards such as EN 388, EN ISO 13997, ISO 37, ASTM D412, ISO 12947, and related thermal protection standards. By understanding your testing requirements, applicable standards, sample conditioning needs, maintenance requirements, and budget, you can build a more efficient and standard-compliant glove testing laboratory.
PPE Testing Equipment Standards: Complete Guide to ISO, EN and ASTM Requirements

Personal protective equipment must meet specific performance requirements before it can be used in demanding workplace environments. ISO, EN, and ASTM standards provide important test methods and performance requirements for different PPE categories. However, the applicable standard depends on the product, intended application, target market, and specific protection requirements.

This guide explains the role of ISO, EN, and ASTM standards in PPE testing and introduces common requirements for safety footwear, protective gloves, protective clothing, masks, and safety helmets. It also explains how laboratories can select suitable PPE testing equipment according to the applicable test method.
What Are the ISTA Standard Tests and ISTA Testing Equipment?
ISTA (International Safe Transit Association) standard tests are globally recognized transportation packaging test procedures designed to evaluate the safety and reliability of products and their packaging throughout the logistics chain. By simulating real-world transportation conditions such as drops, vibration, impact, stacking, and compression, ISTA testing helps identify potential packaging weaknesses before products enter large-scale distribution. ISTA testing equipment—including drop testers, vibration testers, incline impact machines, and compression testers—plays a critical role in accurately reproducing these conditions under laboratory settings. Proper selection and use of ISTA-compliant equipment enable manufacturers to reduce transportation damage, lower return costs, enhance packaging design, and improve customer confidence in product quality and logistics safety.
Sweating Guarded Hotplate Buying Guide
Choosing the right Sweating Guarded Hotplate is essential for obtaining accurate thermal resistance (Rct) and water vapor resistance (Ret) data for textiles. This guide explains how Sweating Guarded Hotplate testing works, introduces international standards including ISO 11092 and ASTM F1868, compares the most important purchasing considerations, and answers common questions from textile laboratories and apparel manufacturers.
 Fabric Pilling Test: How to Choose the Right ICI Pilling Box Tester GT-C18
Fabric pilling directly affects the appearance, durability, and perceived quality of textile products. With global textile brands enforcing stricter testing standards, reliable laboratory testing equipment has become essential for manufacturers. This article explores how fabric pilling tests are conducted and why textile laboratories increasingly invest in professional ICI pilling box testers such as the GT-C18. It explains the advantages of in-house testing, international compliance requirements, key machine components, and important parameters buyers should evaluate before purchasing a pilling tester. By selecting the right equipment, textile companies can achieve faster quality verification, reduce dependence on third-party laboratories, and ensure their fabrics consistently meet international market standards.
Must-See Innovation: Leading Safety Helmets Tester Company at A+A International Trade Fair
The A+A International Trade Fair in Düsseldorf serves as the global hub for occupational safety and PPE innovation, where GESTER—an industry leader with over 20 years of R&D experience—shines as a top safety helmets tester company. This article explores the evolving global safety standards (ISO, ASTM, EN, ANSI) driving demand for advanced testing equipment, and highlights GESTER’s high-precision solutions for impact absorption, penetration resistance, and flame resistance testing. With ISO 9001 certification, computerized automation, real-time data capture, and a comprehensive global support framework (on-site installation, calibration, OEM/ODM services), GESTER empowers PPE manufacturers and laboratories to meet rigorous compliance requirements. The company’s presence at A+A underscores its commitment to bridging innovative PPE design with reliable safety validation, helping businesses accelerate time-to-market while ensuring worker protection worldwide.
GESTER International Co., Ltd. gains certificates of ISO 9001, 3A and SGS Audited supplier etc. with advanced design concept, excellent manufacturing technology and strict quality control.
WeChat
Contact us
Tel: +86-595-28886108 
Fax: +86-595-22515221
E-mail: sales10@gester-instruments.com,
                 info@gester-instruments.com
Mobile/Whatapp/ Wechat:  
             + 86(0)18059983973
Address:  No.15, Chifeng Road,Licheng Region, Quanzhou city of Fujian,PR China.
Customer service
detect