Precautions for protective clothing drop hammer tearing instrument

The protective clothing drop weight tearing instrument is mainly used to measure the tear resistance of various woven fabrics such as protective clothing and non-woven fabrics. It can also be used to measure the tear resistance of thick paper, plastic cloth, electrical tape, etc. It is mainly the national standard GB/T3917.1 'Impact Pendulum Method for Determination of Fabric Tear'. The instrument is composed of main parts such as machine base, support base and sector hammer. (Hong Kong) Co., Ltd. is a manufacturer, and customers in need are welcome Timely call. In addition, in the process of use, the R&D engineer of (Hong Kong) Co., Ltd. stated that some matters needing attention are as follows: Installation precautions: 1. In order to prevent the fan-shaped hammer from swinging during transportation, the instrument uses a screw to connect the fan-shaped hammer to the The support base is fixed and must be removed before use. 2. After removing the fixing screws, it must be installed on a solid workbench with good shock absorption. It is best to pad a 2mm~3mm thick hard rubber plate between the instrument and the workbench. Maintenance precautions: 1. The instrument should be wiped clean regularly, and the mandrel pointer sliding sleeve should be regularly refueled. However, the pointer and pointer baffle shall not have grease to affect the indication error. 2. The instrument should be placed in a vibration-free and clean work room. When not in use, remove the large and small weighting hammers A, B and long and short screws and store them well. The instrument should also be covered with a protective cover to prevent dust from falling into it. . 3. The weight-increasing hammer must not collide, so as to avoid the change of its center of mass position and weight. Main parameters: 1. Tear force range: A hammer: 0～16N; B hammer: 0～32N; C hammer: 0～64N; 2. Force measurement accuracy:≤±1 division; 3. Sample size: 100(L)×63(W)mm; 4. Incision length: 20±0.2mm; 5. Tear length: 43mm; 6. Combined test weights to meet different test requirements; 7. With 200cN, 400cN, 800cN, 1600cN, 3200cN, 6800cN, 13600cN and 30000cN test ranges; 8. The test unit is MN , CN, N, G, KG, OZ, LB are optional.

GESTER International Co.,Limited has an array of branches in domestic for munufacturing textile testing equipment.

With all the pros and cons of different in mind, click GESTER Instruments to learn more about and decide which textile testing equipment option is best for your case.

With innovative technology, our professionals can spend more time focused on strategies that will improve textile testing equipment’s quality and deliver a more positive customers experience.

Based on the textile testing equipment, here are the top compliance challenges businesses face, and what you can do to make them easier on ourselves.