Precautions for the operation method of UV aging tester1
The UV aging tester can quickly and truly reproduce the damage of sunlight, rain and dew to materials. Wide range of application industries, such as: coatings, inks, paints, resins, plastics, printing and packaging, adhesives, automobile and motorcycle industry, cosmetics, metals, electronics, electroplating, medicine, etc. UV aging tester conforms to standards: ASTM D4329, ASTM D4587, ASTM D4799, ASTM D5208, ASTM G151, ASTM G154, EN 927-6, EN 1297, EN 1898 FIBC, EN 12224, EN 13523-10, ISO 4892-1, ISO 4892-3, ISO 11507, ISO 11895, ISO 11997-2, SAE J2020, prEN 1062-4. Scope of application of UV aging tester: The innovative design, compared with other UV fluorescent aging test chambers, achieves higher standards in terms of performance characteristics, ease of use, accuracy and safety, and its verification performance meets or even exceeds other brands. . Multilingual touch screen interface, data acquisition via Ethernet connection, high security, optional recirculation spray device. More other unique user-friendly features. Precautions for the operation of the UV aging tester: 1. The UV aging tester should be placed in a well-ventilated place, and cannot be installed in a dusty place, so that the equipment will be covered with dust. 2. During the experiment, the operator should wear protective goggles and sheath, because ultraviolet radiation has a strong hazard to the operator's eyes. 3. During the test, it is necessary to maintain sufficient water source. 4. Minimize the time for opening the door during the test. 5. The sensing device in the working room should not be subjected to strong impact. 6. When not in use for a long time, carefully check the water source, power supply and various components when using it again, and start the device after confirming that there is no problem. 7. After the test, it is necessary to drain the water in the testing machine, and then dry the studio and the box. 8. After the test, it is necessary to cover the plastic cover to prevent dust from sticking to it, and the UV aging tester needs to be cleaned regularly. 9. When the UV aging tester is not working, it should be kept dry and the power supply should be disconnected. 10. Non-professionals are not allowed to disassemble and assemble without permission in case of failure.
GESTER International Co.,Limited promises that we will manufature our products in accordance with the strictest quality standards.
Check out GESTER Instruments for optimal quality products, and get your textile testing equipment problem fixed. Send us an enquiry or make a call if you are interested.
textile testing equipment can be great additions to companies looking to improve the well-being of their employees, as well as increase the efficiency and productivity of their workers across the organization.
GESTER Instruments focuses on three key elements—process, people, and technology—the authors found that people of two seemingly opposite cultures are able to work together in a project-based environment to complement each other and reap mutual benefits for a win-win result.
This can benefit GESTER Instruments by helping it target those investors and consumers who are specifically interested in its type of product or service.
Choosing the right abrasion testing equipment is essential for obtaining accurate and repeatable wear resistance results. DIN Abrasion Tester and Taber Abrasion Tester are two widely used abrasion testing machines, but they are designed for different material types and testing purposes.
This article provides a detailed comparison between DIN Abrasion Tester and Taber Abraser, covering their working principles, specimen requirements, industry applications, standard compliance, technical characteristics, operation features and practical advantages. DIN Abrasion Tester is mainly designed for rubber, elastic materials, tires, conveyor belts and footwear soles, while Taber Abrasion Tester is suitable for flat materials such as coatings, textiles, plastics, leather, metals and decorative surfaces.
By understanding the differences between these two abrasion testing methods, laboratories can select the most suitable abrasion tester based on sample geometry, testing standards and production quality control requirements.
Cut resistance is one of the most critical performance indicators in personal protective equipment (PPE) testing, directly affecting worker safety in high-risk industries such as metal processing, machinery manufacturing, and emergency rescue. The TDM Cut Test Machine GT-KC28 plays a vital role in accurately evaluating the cut resistance of PPE products, including gloves, protective clothing, footwear materials, composite materials, rubber, and industrial textiles.
By adopting high-precision force control systems, intelligent data processing, and stable transmission technology, the GT-KC28 TDM Cut Tester can accurately measure the critical cutting force of materials and ensure excellent repeatability and comparability of test results. Its user-friendly touch-screen operation, comprehensive data storage, USB data export, and built-in thermal printer greatly improve laboratory efficiency and data traceability.
The TDM Cut Test Machine GT-KC28 fully complies with major international and national standards such as ISO 13997, EN 388, ASTM F2992/F2992M, ANSI/ISEA 105, and GB 24541-2022, making it a reliable solution for PPE manufacturers, third-party testing laboratories, and research institutions. Through precise and standardized cut resistance testing, the GT-KC28 helps reduce industrial cutting injuries, supports PPE certification across global markets, and ensures that protective equipment delivers reliable safety performance in real-world applications.
Quick links
Products