loading

PPE Testing Equipment Manufacturer | Safety Equipment Testing Machines | GESTER


Products

Precautions for the use of AATCC stained gray card

It is used to evaluate the discoloration and staining in the color fastness test. It is divided into 1-5 grades, with half-step increments, and is packed in a packaging sleeve. This series of gray cards are internationally accepted 5 grades and 9 grades. The gray scale of the gray card is made with the colorimetric data provided by ISO, AATCC, and GB through careful color matching. The colorimetric data of each file is measured with an imported high-precision spectrophotometer and corrected with the colorimetric transmission standard of the Chinese Academy of Metrology to ensure that its grayscale data is consistent with international standards. Applicable fields: As the gray card is calibrated with the colorimetric data standards specified by the international standard ISO, American standard AATCC and my country's national standard GB, the color fastness grade evaluated by the gray card is consistent with the international standards. This gray card is suitable for the color fastness rating of textiles in GB, ISO, AATCC, DIN, BS, JIS, EN standards. Precautions for use 1. Keep the gray card clean. 2. Always check whether there are fingerprints such as fingers on the gray card. 3. If it is found that the imprint has interfered with the rating, the gray card must be replaced. 4. Try to avoid mechanical damage caused by touching. 5. If mechanical damage interferes with the rating, it should be replaced. 6. After the gray card is used up, put it into the sleeve.

For the study, researchers defined GESTER as strategies to foster some social good, including programs that benefit community engagement, diversity, the environment, human rights and employee relations.

GESTER International Co.,Limited, to be the world leader in products, services and solutions that enable and transform the way consumers and businesses gather, manage, distribute and communicate information.

Turn to GESTER International Co.,Limited if you are looking for premier tensile tester manufacturers solution, affordable packages, and quality textile testing equipment products! We produce wide series of high quality, first-class , and provide professional textile testing equipment services at great prices.

Utilizing high technology to manufacture products can afford a fully experience to customers by using textile testing equipment.

Producing with varied technical skills, textile testing equipment can be used in a wide range of applications as tensile tester manufacturers.

GET IN TOUCH WITH Us
recommended articles
What is Air Permeability Tester? Detailed Overview and Benefits

The air permeability tester is a high-precision testing instrument designed to evaluate the breathability of PPE materials, textile fabrics, non-woven fabrics, woven fabrics, and industrial filter media. It plays a critical role in quality control, product development, and laboratory research across multiple industries including PPE, textiles, automotive interiors, and filtration systems.

Modern instruments such as the GT-C27 Air Permeability Tester are developed with advanced sensor systems, automated control logic, and multi-standard compatibility to ensure reliable and repeatable results. Complying with global standards such as ISO 9237, ASTM D737, DIN 53887, and GB/T 5453, it guarantees internationally recognized testing performance.

With high automation, accurate pressure sensing, and flexible unit conversion systems, air permeability testing equipment significantly improves testing efficiency while reducing human error. It is widely used in PPE manufacturing, textile engineering, non-woven product development, and industrial filtration quality inspection.
Looking for a Laboratory Protective Clothing Tester Supplier? Key Criteria to Consider
As global demand for high-performance PPE surges, selecting a qualified laboratory protective clothing tester supplier becomes critical for manufacturers and regulators. This article outlines core selection criteria: compliance with international standards (ISO, EN, ASTM), comprehensive protective gear tests (particle resistance, fluid barrier, thermal resistance, electrostatic safety), manufacturer qualifications (ISO 9001 certification, partnerships with SGS/TUV/Intertek), equipment precision (automation, modular design, data traceability), and end-to-end service (global support, calibration, customization). With 25+ years of experience, GESTER International delivers standards-aligned, high-precision testing instruments and integrated laboratory solutions, ensuring PPE meets rigorous safety requirements for medical, industrial, and chemical sectors. Explore how to choose a partner that safeguards worker safety through reliable testing.
How to Test Firefighter Turnout Gear Thermal Protection?
Firefighter turnout gear plays a critical role in protecting firefighters operating in extreme environments involving high temperatures, flames, radiant heat, and convective heat. Its thermal protective performance directly affects firefighter safety and survival during fireground operations. This article explains how to test firefighter turnout gear thermal protection through Thermal Protective Performance (TPP) testing. It introduces the scientific principle based on the Stoll curve, outlines key influencing factors such as heat flux intensity and exposure time, and reviews internationally recognized standards including NFPA 1971 and ISO 17492. The article also highlights the testing advantages of the GT-RC02 TPP Thermal Protection Tester, which provides accurate, stable, and standards-compliant evaluation of flame-retardant protective clothing materials under combined radiant and convective heat exposure.
ISO 20344 Tester – Tested by ISO 20344 Standard
EN ISO 20344 is the core international test method standard for full-performance detection of safety footwear. This article systematically explains the full range of whole-shoe test items covered by the ISO 20344 standard, analyzes the core practical advantages of mandatory ISO 20344 testing for factories and laboratories, and matches a complete set of dedicated ISO 20344 testers one by one. It also sorts out mainstream associated safety footwear standards worldwide, providing one-stop standardized testing solutions for safety footwear manufacturers, third-party testing institutions and occupational safety supervision departments.
Glove Tester: Key Standards EN 388 & EN 407
Protective glove testing is the core link to verify hand safety protection performance for industrial PPE. This article focuses on the two most authoritative EU mandatory standards EN 388 and EN 407, elaborates on standardized test necessity, complete test items, professional supporting glove testers, result rating rules, and the differences between mechanical risk testing and thermal risk testing. It provides one-stop compliant testing reference for glove manufacturers, third-party testing labs, and safety supervision institutions to meet global CE certification and workplace safety production requirements.
How to Improve the Accuracy of a Martindale Tester
Ensuring the accuracy of your Martindale abrasion and pilling tester is critical for reliable textile quality control. This guide details essential steps, from precise sample preparation and correct machine operation to routine maintenance. We also explore how advanced testers, like the GESTER model with its dual-servo drive and tool-free operation, are engineered to eliminate common sources of error and enhance testing precision for superior results.
What is EN 149 & Why is it Important?
EN 149 is the core European standard for particle-filtering half masks and FFP respirators. This article elaborates on the definition, structure, performance classification, marking rules and core advantages of EN 149, compares it with NIOSH N95, KN95, EN 143 and medical mask standards, and lists industry application scenarios, as well as professional mask and filter testing instruments compliant with EN 149 testing requirements.
What is the Safety Glove & Shoe Upper Cutting Tester GT-KC29
The Safety Glove & Shoe Upper Cutting Tester GT-KC29 is a high-precision testing instrument developed to measure the cut resistance performance of safety gloves and footwear uppers. In industrial and construction environments where sharp tools and metal edges pose significant injury risks, the GT-KC29 provides a reliable evaluation method by simulating real cutting motion. This tester meets EN 388 section 6.2, ISO 20344:2021 section 5.23, GB/T 20991 section 6.14, and other global standards, making it essential for PPE manufacturers, testing laboratories, and quality control departments. With automated operation, high repeatability, and multi-standard compliance, it helps companies improve product safety levels, enhance global competitiveness, and ensure superior protection for end users.
Understanding Universal Tensile Testing machine: Feature, Operation
Discover how universal testing machines perform tensile, compression, bending, and peel tests on metals, plastics, rubber, and composites. Features include servo motors, 0.001mm resolution, RS232 data, and safety systems. Step-by-step operation guide included.
Whole Shoes Flexing Tester GT-KA01-2: An Ultimate Guide to Its Benefits and Applications
The Whole Shoes Flexing Tester GT-KA01-2 is an advanced footwear testing instrument designed to evaluate the flexing resistance and durability of finished shoes. By simulating repeated walking and bending movements, it helps manufacturers identify cracks, material fatigue, and structural weaknesses in footwear products. Compliant with SATRA TM92, ISO 24266 Method A, and HG/T 2871-2022 Method B, this testing machine provides accurate, repeatable, and reliable results for sports shoes, casual shoes, work shoes, and other footwear types. This guide explores its features, benefits, industry applications, and frequently asked questions to help footwear manufacturers improve product quality and meet international testing requirements.
GESTER International Co., Ltd. gains certificates of ISO 9001, 3A and SGS Audited supplier etc. with advanced design concept, excellent manufacturing technology and strict quality control.
WeChat
Contact us
Tel: +86-595-28886108 
Fax: +86-595-22515221
E-mail: sales10@gester-instruments.com,
                 info@gester-instruments.com
Mobile/Whatapp/ Wechat:  
             + 86(0)18059985379
Address:  Block 402,4th floor, f buliding, shengfulan business Center, no.577 jitai road, economic and  Technological development zone quanzhou of fujian.China.
Customer service
detect