loading

PPE Testing Equipment Manufacturer | Safety Equipment Testing Machines | GESTER


Products

Properties and uses of fibers commonly used in textiles

So far, cotton is still the main raw material for spinning, accounting for about 50% of spinning raw materials. Raw cotton has three categories: long-staple cotton, fine-staple cotton, and coarse-staple cotton, the latter of which has been basically eliminated. Long-staple cotton has long fibers, good quality and low output, and is only produced in Xinjiang in my country. The total amount of long-staple cotton produced in Egypt is the largest, and the quality is also good; the Pima cotton (PIMA) produced in the United States is also long-staple cotton. Long-staple cotton is mainly used in the manufacture of high-end textiles, such as high-count cotton underwear, shirts, T-shirts and other clothing. General textiles use fine-staple cotton. The performance characteristics of cotton fiber are that its strength is generally lower than that of synthetic fibers, but it has good hygroscopicity, air permeability, softness, good wearing performance, alkali resistance but not acid resistance, easy dyeing, insect resistance and mildew resistance. Comfortable to wear is its main advantage, suitable for underwear clothing and all kinds of commonly used clothing. The market share of cotton and chemical fiber blended products is very high, but pure cotton clothing is still the best choice for wearing comfort, safety, health and practicality. current“organic cotton”Has become the darling of the market. Its characteristics are not much different from ordinary cotton, but it is planted, processed, stored and sold in an organic way. It has strict requirements on soil, water source, fertilization and environment. It is certified by a special certification agency. It is a green and environmentally friendly product. The price is higher than ordinary cotton products, especially suitable for underwear, bedding, ladies' products. Colored cotton refers to colored cotton, which has been planted in my country as early as the Ming and Qing Dynasties. Under the influence of advocating natural ecology today, colored cotton products do not need to be dyed, the color is natural, the texture is soft, and there is no chemical pollution, making it an ideal textile raw material. At present, the color of colored cotton has developed a lot, but the color is not stable enough, not bright enough, the light fastness is poor, and the color spectrum is not complete. In addition, the color cotton planting yield is low, and there are many neps in spinning, so the development is limited. It is mainly used for Bedding such as underwear and towels are not widely used. There are many types of animal hair and wool fibers, but the main ones used for textiles are sheep wool, rabbit hair, cashmere, yak hair and so on. (1) Sheep wool Sheep wool fiber has many excellent properties, such as good elasticity, strong moisture absorption and moisture removal, good warmth retention, soft color, and can be used for the development of various types of clothing. However, wool fibers are acid and alkali resistant, and easy to be eaten by insects. . The finer the wool fiber, the better the quality, which is related to the variety of wool. Wool fiber has a high price and is mainly used to process high-end clothing, such as suits, coats, dresses, sweaters, scarves, etc. It is more popular that it is blended with chemical fiber products, which can learn from each other and reduce costs. Consumers should pay close attention to wool products of the gross content. (2) Cashmere (Cashmere) Cashmere is the fluff caught during the goat hair removal season. English called cashmere, very precious, known as“soft gold”. It is characterized by lightness, softness, good warmth retention, and comfortable wearing. It is generally used to weave high-end products such as cashmere sweaters, suits, coats, and scarves. Cashmere products are sold at extremely high prices. Consumers should pay attention to the labeling of the content of cashmere in clothing, and pay attention to daily wear and care, especially when wearing cashmere sweaters, be careful not to rub hard, otherwise it will be easily damaged. (3) Rabbit fur Rabbit fur is the fluff of Angora rabbits. The fiber is light, soft, fluffy, and has good warmth retention. Shirts, scarves, etc., should reduce friction when using to prevent hair loss. The most commonly used hemp fibers in hemp clothing are ramie, flax and hemp. The performance characteristics of hemp are that the fibers are rough and hard, have strong moisture absorption and dehumidification capabilities, are cool and comfortable to wear, and have natural antibacterial and anti-mite effects. Viscose fiber blend, especially suitable for weaving summer clothes. The fineness of flax fiber is finer than that of ramie, and the fineness and length of hemp fiber is between linen and ramie. Silk products commonly used in silk clothing are silk, also known as real silk, which is an ancient high-grade weaving material. Its characteristics are bright and gorgeous color, moisture absorption and breathability, elegant and soft, comfortable to wear close to the body, good to the skin, favored by ladies, and the first choice for high-end summer clothing. The disadvantage is that silk fabrics are more delicate and difficult to care for. In recent years, spun silk and spun silk made from waste cotton are often blended with cotton to make garments, which are called garments on the market.“cotton silk”, but the surface is rough; it is popular with consumers because of its affordable price and good performance. Regenerated cellulose fibers Traditional regenerated cellulose fibers, such as viscose fiber, acetate fiber and cupro fiber, are widely used in the clothing industry. Among them, viscose fiber is known as a blended and versatile fiber, and it is often blended with cotton and various fibers. Traditional viscose fibers have good spinnability and weaving properties, and are comfortable to wear. Consumers used to call them“rayon”, but the strength of viscose fiber is low, especially in wet state; when washing, the fabric becomes stiff due to fiber expansion, and the shrinkage rate is large, and the dimensional stability of the garment is poor. The traditional viscose fiber production pollutes the environment, so there have been many new green regenerated cellulose fibers with high strength and high wet modulus, as well as new regenerated vegetable protein fibers and lactic acid fibers.

GET IN TOUCH WITH Us
recommended articles
Bally Resistance Flexing Tester – An Effective Method for Testing Material Flexing
The Bally Resistance Flexing Tester, also known as the Bally Leather Flexometer, is an essential testing instrument for evaluating the flex durability of leather, coated fabrics, synthetic leather, and textile materials. By accurately simulating repeated bending conditions encountered during actual use, the tester helps manufacturers assess material performance, prevent premature product failures, and meet international quality standards. This article explores the working principle, key benefits, applicable testing standards, and common specimen materials suitable for Bally flexing resistance testing.
How to Choose the Right Safety Shoes Testing Equipment Supplier?
Safety shoes are essential personal protective equipment (PPE) in high-risk industries. To ensure compliance with international standards such as EN ISO 20345 and ASTM F2413, professional testing equipment is required. This article explains common safety shoes test items, corresponding testing machines, and how to choose a reliable safety shoes testing machine supplier. It also analyzes key factors such as technical capability, standard compliance, equipment stability, and cost performance to help enterprises build a strong quality control system and enhance global competitiveness.
Safety Footwear Test Explained: Compression and Puncture Tester
This article fully explains the working principle, applicable international standards, test advantages and application scope of safety footwear compression and puncture tester GT-KB12A. It covers core protective performance testing of safety shoe toecap and sole steel plate, complies with GB, ISO, EN, ASTM and other global standards, and serves manufacturers, third-party labs and safety footwear R&D institutions for quality control .
ISO 20345 vs ASTM F2413: Differences Between Safety Footwear Standards
ISO 20345 and ASTM F2413 are the two most recognized safety footwear standards used worldwide to evaluate protective footwear performance. Although both standards define minimum requirements for impact resistance and compression protection, differences in test energy levels, compression loads, marking systems, and hazard classifications can affect certification results. This article explains the key differences between ISO 20345 and ASTM F2413, helping footwear manufacturers, exporters, and quality control teams select the correct testing standard and improve compliance with international safety requirements.
Heat Contact Machine GT-C101-The Ultimate Selection Guide

The Heat Contact Machine GT-C101 is a specialized testing instrument designed for evaluating the heat resistance and thermal protective performance of gloves, protective clothing, and other heat-resistant materials used in high-temperature environments. In industries such as smelting, casting, welding, and glass manufacturing, workers are frequently exposed to intense heat, making accurate testing of contact heat resistance essential for ensuring safety and compliance.

GT-C101 simulates real working conditions by measuring heat transfer delay and thermal transmission under instant contact with high-temperature surfaces. Fully compliant with EN 407, EN 702, and ISO 12127-1 standards, this machine provides precise, repeatable data for manufacturers, laboratories, and research institutions. With high-temperature capability up to 500°C, advanced calorimetry, digital monitoring, and adjustable contact speed, the Heat Contact Machine GT-C101 is an indispensable tool for developing and certifying next-generation PPE and heat-insulation materials.
Universal Testing Machine Dual Column GT-K01: A Reliable Solution for footwear Testing
The Universal Testing Machine Dual Column GT-K01 is a high-precision mechanical testing instrument widely used in the footwear industry to evaluate tensile, compression, bending, tearing, and bonding strength of various materials. With advanced servo control, high-accuracy displacement measurement, and compliance with multiple international testing standards such as SATRA, ASTM, ISO, and BS, the GT-K01 footwear universal testing machine provides reliable data for quality control, material research, and product certification. This article explores the working capabilities, structural features, and practical value of the GT-K01 universal testing machine in footwear testing and manufacturing processes.
GESTER: China Top PPE Testing Equipment Company Leading Global Safety Standards
Since 1997, GESTER International Co., Ltd has emerged as China’s top PPE testing equipment company, with 25+ years of R&D experience in high-precision testing instruments. Serving clients in over 160 countries and partnering with global leaders like SGS, Intertek, and TUV, GESTER aligns its products with international standards (ISO, ASTM, EN, GB) to ensure reliable PPE performance. Highlighted by the GT-RC02B TPP Thermal Protection Tester—capable of simulating extreme thermal environments and calculating critical safety metrics like TPP values and escape time—and the GT-KC28 TDM Cut Test Machine, GESTER’s portfolio covers thermal protection, cut resistance, footwear testing, and more. The company offers comprehensive support, including ISO 17025/NFPA-aligned calibration, on-site installation, and staff training, empowering PPE manufacturers and testing laboratories to meet stringent global regulations, prevent workplace injuries, and accelerate market access. As a leader in global safety standards, GESTER combines technical precision, user-centric design, and lifecycle service to deliver tailored solutions for high-risk industries worldwide. Visit https://www.gesterinstruments.com/ for full product details.
Why GESTER is Recognized as a Global Top Safety Shoe Tester Exporter
As global industrial safety requirements tighten, GESTER International Co., Ltd has emerged as a globally recognized top safety shoe tester exporter, serving 168 countries with over 25 years of specialized expertise. The company’s success hinges on its commitment to precision engineering, compliance with international standards (ISO, ASTM, EN, SATRA), and partnerships with renowned testing institutes like SGS, Intertek, and TUV. Its product lineup, including the Safety Glove & Shoe Upper Cutting Tester GT-KC29 and cut resistance testers, delivers reliable, repeatable data for safety footwear durability, cut resistance, and other critical performance indicators. Complemented by a comprehensive global service network (on-site installation, calibration, staff training) and OEM/ODM customization capabilities, GESTER streamlines quality control for manufacturers, facilitating market access and ensuring workplace safety. Trusted by PPE brands and laboratories worldwide, GESTER bridges technical excellence and practical usability to drive efficiency in safety shoe certification and global trade.
Top Features of a Certified TDM Cut Resistance Tester Supplier for Laboratory Use
The demand for precise PPE safety testing has surged with the evolution of protective gear, making TDM (Tomodynamometer) cut resistance testing a critical process for evaluating protective gloves and industrial textiles. This article details the top features of a certified TDM cut resistance tester supplier for laboratory use, including compliance with international standards (EN 388, ISO 13997, ASTM F2992), high-precision mechanical engineering, automated workflows, robust data management, and integrated safety features. It highlights GESTER International Co., Ltd.—a 20+ year experienced manufacturer with ISO 9001 certification and partnerships with SGS, Intertek, and TUV—as a leading supplier, offering the GT-KC28 TDM Cut Test Machine and comprehensive services (on-site installation, calibration, global technical support). For laboratories seeking reliable, standard-compliant testing solutions to validate PPE safety claims, this article provides actionable insights into strategic procurement. Visit https://www.gesterinstruments.com/ for more technical specifications and PPE testing solutions.
Looking for a Laboratory Protective Clothing Tester Supplier? Key Criteria to Consider
As global demand for high-performance PPE surges, selecting a qualified laboratory protective clothing tester supplier becomes critical for manufacturers and regulators. This article outlines core selection criteria: compliance with international standards (ISO, EN, ASTM), comprehensive protective gear tests (particle resistance, fluid barrier, thermal resistance, electrostatic safety), manufacturer qualifications (ISO 9001 certification, partnerships with SGS/TUV/Intertek), equipment precision (automation, modular design, data traceability), and end-to-end service (global support, calibration, customization). With 25+ years of experience, GESTER International delivers standards-aligned, high-precision testing instruments and integrated laboratory solutions, ensuring PPE meets rigorous safety requirements for medical, industrial, and chemical sectors. Explore how to choose a partner that safeguards worker safety through reliable testing.
GESTER International Co., Ltd. gains certificates of ISO 9001, 3A and SGS Audited supplier etc. with advanced design concept, excellent manufacturing technology and strict quality control.
WeChat
Contact us
Tel: +86-595-28886108 
Fax: +86-595-22515221
E-mail: sales10@gester-instruments.com,
                 info@gester-instruments.com
Mobile/Whatapp/ Wechat:  
             + 86(0)18059985379
Address:  No.15, Chifeng Road,Licheng Region, Quanzhou city of Fujian,PR China.
Customer service
detect