loading

PPE Testing Equipment Manufacturer | Safety Equipment Testing Machines | GESTER


Products

Researchers invent a new nano-optical biosensor

Biosensors are important diagnostic devices that must be fast, inexpensive and easy to use. If the biosensor is compact and can be operated autonomously, it can be used from the doctor to the patient itself, so the value is very high. Most optical biosensors require a broad range of light colors as a basis (like a rainbow) to operate reliably, and the need for a wide range of light colors makes the sensors bulky, expensive, and more complex. Most biosensors today require a spectrometer to extract data from each light color, limiting their usefulness. Scientists at EPFL have proposed a new concept that allows a single color of light to operate as a simple imaging detector. Despite using only a single color of light, the system provides extremely accurate biosensing information, as if an entire rainbow of colors illuminate the sensor. The new biosensor uses two specific capabilities, including nanophotonics and data science techniques. The chips themselves are built from nanostructures made of silicon. Nanostructured silicon surfaces with features around 100 nanometers can more efficiently capture light at the biological sample/chip interface. This makes the biosensor extremely sensitive to the presence of biomarkers, leading to noticeable changes in the signature of the incident light. This feature is known as the light intensity of the collected light"quantity"The change. Typically, a camera continuously receives light passing through the biochip, acquiring intensity information from the biochip for millions of image pixels. Images of biomarkers and intensity changes on the nanostructures attached to the biochip are compiled at very high resolution from the induced intensity changes at each pixel. The researchers used data science techniques combined with pre-recorded performance maps to process light intensity information from a large number of pixels. The system considers the efficiency of each pixel and adjusts its contribution to the final reading in a collective manner. The researchers likened the process to coming to a solid conclusion by carefully weighing their knowledge in the field after receiving input from a group of experts. Scientists on the project created a demonstration of cancer diagnosis using a new biosensor that detects tumor exons, which are biomarkers of early-stage cancer. The team determined that the image-based biosensor could monitor breast cancer exons in real time over a broad detection range, making it clinically relevant for both healthy and sick people.

GET IN TOUCH WITH Us
recommended articles
Top Features of a Certified TDM Cut Resistance Tester Supplier for Laboratory Use
The demand for precise PPE safety testing has surged with the evolution of protective gear, making TDM (Tomodynamometer) cut resistance testing a critical process for evaluating protective gloves and industrial textiles. This article details the top features of a certified TDM cut resistance tester supplier for laboratory use, including compliance with international standards (EN 388, ISO 13997, ASTM F2992), high-precision mechanical engineering, automated workflows, robust data management, and integrated safety features. It highlights GESTER International Co., Ltd.—a 20+ year experienced manufacturer with ISO 9001 certification and partnerships with SGS, Intertek, and TUV—as a leading supplier, offering the GT-KC28 TDM Cut Test Machine and comprehensive services (on-site installation, calibration, global technical support). For laboratories seeking reliable, standard-compliant testing solutions to validate PPE safety claims, this article provides actionable insights into strategic procurement. Visit https://www.gesterinstruments.com/ for more technical specifications and PPE testing solutions.
How to Choose the Right Safety Shoes Testing Equipment Supplier?
Safety shoes are essential personal protective equipment (PPE) in high-risk industries. To ensure compliance with international standards such as EN ISO 20345 and ASTM F2413, professional testing equipment is required. This article explains common safety shoes test items, corresponding testing machines, and how to choose a reliable safety shoes testing machine supplier. It also analyzes key factors such as technical capability, standard compliance, equipment stability, and cost performance to help enterprises build a strong quality control system and enhance global competitiveness.
Everything You Need to Know About Programmable Temperature Humidity Chamber
A Programmable Temperature Humidity Chamber simulates environmental conditions to test product durability, stability (like shelf life & ageing), and performance across materials, electronics, automotive parts, food, and pharmaceuticals. This guide explains its five core systems (Control, Refrigeration, Heating, Humidity, Air Circulation) and their functions for precise testing.
A Complete Guide to Martindale Testing by the Best Martindale Abrasion Tester Supplier
Durability is critical for textiles and footwear, and Martindale testing is the gold standard for measuring abrasion resistance and pilling performance. This guide dives into Martindale testing’s core mechanics (Lissajous figure multi-directional friction), strategies to boost testing accuracy (sample clamping, load calibration, abrasive standardization), and compliance with international standards (ISO 12947, ASTM D4966, EN). As a top Martindale abrasion tester supplier with 25+ years of expertise, GESTER International delivers high-precision instruments (Martindale Abrasion Tester GT-C13B, etc.) certified to ISO 9001 and trusted by SGS, Bureau Veritas, and other global testing institutes. Beyond machinery, GESTER offers global technical support, on-site installation, and calibration services. The guide also includes a procurement framework to help labs select tailored Martindale testing solutions. For reliable, standard-compliant durability testing, GESTER is your trusted partner.
ISO 20344 Tester – Tested by ISO 20344 Standard
EN ISO 20344 is the core international test method standard for full-performance detection of safety footwear. This article systematically explains the full range of whole-shoe test items covered by the ISO 20344 standard, analyzes the core practical advantages of mandatory ISO 20344 testing for factories and laboratories, and matches a complete set of dedicated ISO 20344 testers one by one. It also sorts out mainstream associated safety footwear standards worldwide, providing one-stop standardized testing solutions for safety footwear manufacturers, third-party testing institutions and occupational safety supervision departments.
Installation Training for the Incline Impact Tester GT-N49
Our expert team provides comprehensive on-site installation and training for the Incline Impact Tester GT-N49. This critical packaging testing equipment simulates real-world impacts during handling, transport, and stacking to evaluate product damage resistance. Learn about its key features like flexible moving plates, height adjustment, pneumatic angle control, and remote operation safety. Our service ensures proper setup, operational mastery, maintenance guidance, and troubleshooting support fo
Strengthening Safety Standards: The Role of a PPE Testing Equipment Supplier at A+A
The A+A Trade Fair in Düsseldorf (2026) highlights tightening global PPE safety regulations, shifting the industry from basic compliance to comprehensive performance verification. As international standards (ISO, EN, ASTM) become more granular, professional PPE testing equipment suppliers like GESTER play a pivotal role in bridging theoretical standards and practical implementation. GESTER’s high-precision, multi-standard testing tools (covering cut resistance, thermal protection, liquid penetration, etc.), backed by ISO 9001 certification and partnerships with SGS/TUV, ensure data traceability, reliability, and compliance. With 20+ years of expertise, modular innovation, and holistic service (calibration, training), the supplier supports manufacturers and laboratories in meeting stringent safety benchmarks, enabling global market entry and safeguarding worker lives. Strategic procurement of such future-ready equipment is key to long-term occupational safety success.
EN ISO 20345 Safety Footwear Standard — How to Choose the ISO 20345 Tester
EN ISO 20345 is the core international standard for general-purpose safety footwear, defining minimum performance requirements for foot protection against various workplace hazards. This article elaborates on the definition, key highlights and mainstream safety classes of the EN ISO 20345 standard, covering applicable industry scenarios. It further provides a systematic step-by-step guide for selecting qualified ISO 20345 testing equipment, involving test item confirmation, equipment performance evaluation and reliable supplier selection. Finally, it introduces professional ISO 20345-compliant testing solutions provided by GESTER for footwear manufacturers and third-party testing institutions.
How to Find a Professional Safety Glove Testing Machine Manufacturer with CE Certification?
With the global PPE market’s rapid growth, choosing a professional CE-certified safety glove testing machine manufacturer is critical for data integrity and international compliance. This article explains why CE certification is non-negotiable (ensuring EU safety/quality standards), outlines essential test items (abrasion, cut, thermal protection per EN 388/EN 407), highlights core instruments (GESTER GT-KC28 TDM Cut Tester, GT-KC29 Cutting Tester, GT-C101 Heat Contact Machine), and details how to evaluate suppliers (20+ years of experience, partnerships with SGS/Bureau Veritas, ISO 9001 certification, after-sales support). It also covers the benefits of OEM/ODM capabilities for customized solutions. Ultimately, partnering with trusted manufacturers like GESTER ensures high-precision, compliant testing to protect workers and meet global market requirements.
Why GESTER is Recognized as a Global Top Safety Shoe Tester Exporter
As global industrial safety requirements tighten, GESTER International Co., Ltd has emerged as a globally recognized top safety shoe tester exporter, serving 168 countries with over 25 years of specialized expertise. The company’s success hinges on its commitment to precision engineering, compliance with international standards (ISO, ASTM, EN, SATRA), and partnerships with renowned testing institutes like SGS, Intertek, and TUV. Its product lineup, including the Safety Glove & Shoe Upper Cutting Tester GT-KC29 and cut resistance testers, delivers reliable, repeatable data for safety footwear durability, cut resistance, and other critical performance indicators. Complemented by a comprehensive global service network (on-site installation, calibration, staff training) and OEM/ODM customization capabilities, GESTER streamlines quality control for manufacturers, facilitating market access and ensuring workplace safety. Trusted by PPE brands and laboratories worldwide, GESTER bridges technical excellence and practical usability to drive efficiency in safety shoe certification and global trade.
GESTER International Co., Ltd. gains certificates of ISO 9001, 3A and SGS Audited supplier etc. with advanced design concept, excellent manufacturing technology and strict quality control.
WeChat
Contact us
Tel: +86-595-28886108 
Fax: +86-595-22515221
E-mail: sales10@gester-instruments.com,
                 info@gester-instruments.com
Mobile/Whatapp/ Wechat:  
             + 86(0)18059985379
Address:  Block 402,4th floor, f buliding, shengfulan business Center, no.577 jitai road, economic and  Technological development zone quanzhou of fujian.China.
Customer service
detect