Shenzhen Experimental School Chemistry Laboratory Equipment Bidding Announcement
Bidding information (reproduced in China International Bidding Network): Shenzhen Experimental School Chemistry Laboratory Equipment Bidding Announcement! 1. The bid invitation and bidding documents for this project are all times in the 24-hour system Beijing time, all currency units are Renminbi, and the measurement units used are subject to 'The People's Republic of China Legal Measurement Unit' (unless otherwise specified) ). 2. Tender No.: 0851-1461SZ00CL823. Project Name: Chemical Laboratory Equipment and Chemical Digital Exploration Laboratory Equipment and Equipment Project 4. Project Type: Goods 5. Project Status List: Procurement Content Quantity Delivery Time Chemical Laboratory Equipment and Equipment 1 chemical digital exploration laboratory equipment within 30 days (calendar days) after signing the contract. 1 within 30 days (calendar days) after signing the contract. Remarks: 5.1 Please refer to the 'User Requirements' in the bidding documents for specific requirements. 5.2 This project purchases domestic products. 6. Qualified bidder qualification requirements: 6.1 have the qualifications of Article 22 of the 'Government Procurement Law of the People's Republic of China'; 6.2 domestic suppliers with production or supply capabilities; 6.3 no suppliers participating in the bidding of government procurement projects in the past three years Criminal record of bribery. 6.4 Qualified as a registered supplier for Shenzhen government procurement (supplier registration website: http://www.cgzx.sz.gov.cn/), and provide a copy of the Shenzhen government procurement supplier registration card. 6.5 This project accepts quotations from dealers and agents. Distributors and agents, as bidders, shall provide product agency certificates or valid power of attorney from the manufacturer; 6.6 Consortium bidding is not accepted for this project. 7. Government procurement agencies only accept bids from suppliers who have gone through the registration and registration procedures to purchase this bidding document. 8. The time, place, method of obtaining the bidding documents and the price of the bidding documents: 8.1 Time of obtaining the bidding documents: December 2, 2014-December 12, 2014, working days 9:00-12:00, 14:00 -17:00 (except statutory holidays) 8.2 Location for obtaining bidding documents: 15F, China Economic and Trade Building, Zhuzilin, Futian District, Shenzhen, Guangdong Cailian Purchasing Tendering Co., Ltd. Shenzhen Branch 8.3 How to obtain bidding documents: (The supplier shall stamp the unit with the following information (Official seal to purchase bidding documents) 8.3.1 Provide a copy of the registration card of the Shenzhen government procurement supplier; 8.3.2 A copy of the business license or a copy of the legal person certificate of the institution that has passed the annual review; 8.3.3 The person who purchases the bidding document, requires Provide: 8.3.3.1. If the handler is the legal representative, the original legal representative certificate and a copy of the legal representative’s ID card shall be provided; 8.3.3.2. If the handler is the authorized representative of the bidder, the legal representative’s authorization shall be provided The original power of attorney and a copy of the authorized representative's ID card. Remarks: 1) The above information must be included in the bidding documents when participating in the formal bidding. 2) In order to improve efficiency, the supplier can download the 'Registration Form for the Sale of Bidding Documents (click to open)3) Branch bidding: The supplier is a branch company registered as a non-independent legal person, and must provide a copy of the head office’s business license and the original copy of the effective authorization letter issued by the head office to the branch. If the supplier has the effective authorization of the head office, the relevant qualification certificate obtained by the head office is valid for the branch company. If the laws, regulations or bidding documents provide otherwise, follow its provisions. 8.4 Suppliers shall provide the above information as required to purchase the bidding documents and after review, only accept bids from suppliers who formally obtain the bidding documents through the above methods. 8.5 Price of Bidding Documents: RMB 500.00 per copy of the bidding documents, non-refundable after sale. 9. Time and place for bidding and bid opening: 9.1 Time for submission of bid documents: December 15, 2014 9:00-9:309.2 Deadline for bidding and bid opening time: December 15, 2014 9:309.3 Place for bidding and bid opening: Shenzhen Meeting room of Shenzhen Branch of Guangdong Cailian Purchasing Tendering Co., Ltd., 15F, China Economic and Trade Building, Zhuzilin, Futian District. 10. The relevant announcements of this project are on the China Government Procurement Network (www.ccgp.gov.cn), Shenzhen Government Procurement Network (http://www.cgzx.sz.gov.cn/) and the bidding agency website (www.chinapsp.gov.cn). cn), the date when the relevant announcement is published in the media will be deemed to have been delivered effectively and no further notice will be given. 11. The bidders are requested to send their queries to the bidding documents in written form (including the belief that the technical indicators or parameters of the bidding documents have exclusive or discriminatory clauses) affixed with the official seal of the unit and faxed or sent to our company five days before the deadline for bidding. Not entertained. Our company will send the results of the centralized Qu0026A on the website of Shenzhen Municipal Government Procurement Center or our website in the form of public release to all bidders. Any amendments to the bidding documents shall be subject to the notice issued by our company. 12. Purchaser's contact information: Purchaser's name: Shenzhen Experimental School 13. Tendering agency and contact information: Tendering agency: Guangdong Cailian Purchasing Tendering Co., Ltd. Address: 15F, China Economic and Trade Building, Zhuzilin, Futian District, Shenzhen Contact: Miss Yuan Contact Method: 0755-8837 7573 Zip code: 518040 Fax: 0755-8837 7787 Website: www.chinapsp.cn Tendering agency internal disciplinary supervision telephone: 020-8765 338014. If you use remittance to purchase the bidding documents, please remit to the following account: account name : Guangdong Cailian Purchasing Tendering Co., Ltd. Shenzhen Branch Account Bank: China Construction Bank Shenzhen Tairan Sub-branch Account Number: 4420 1530 3000 5252 5818 (Account number for purchasing bidding documents) Guangdong Cailian Purchasing Tendering Co., Ltd. December 2, 2014
Cut resistance is one of the most critical performance indicators in personal protective equipment (PPE) testing, directly affecting worker safety in high-risk industries such as metal processing, machinery manufacturing, and emergency rescue. The TDM Cut Test Machine GT-KC28 plays a vital role in accurately evaluating the cut resistance of PPE products, including gloves, protective clothing, footwear materials, composite materials, rubber, and industrial textiles.
By adopting high-precision force control systems, intelligent data processing, and stable transmission technology, the GT-KC28 TDM Cut Tester can accurately measure the critical cutting force of materials and ensure excellent repeatability and comparability of test results. Its user-friendly touch-screen operation, comprehensive data storage, USB data export, and built-in thermal printer greatly improve laboratory efficiency and data traceability.
The TDM Cut Test Machine GT-KC28 fully complies with major international and national standards such as ISO 13997, EN 388, ASTM F2992/F2992M, ANSI/ISEA 105, and GB 24541-2022, making it a reliable solution for PPE manufacturers, third-party testing laboratories, and research institutions. Through precise and standardized cut resistance testing, the GT-KC28 helps reduce industrial cutting injuries, supports PPE certification across global markets, and ensures that protective equipment delivers reliable safety performance in real-world applications.
The Heat Contact Machine GT-C101 is a specialized testing instrument designed for evaluating the heat resistance and thermal protective performance of gloves, protective clothing, and other heat-resistant materials used in high-temperature environments. In industries such as smelting, casting, welding, and glass manufacturing, workers are frequently exposed to intense heat, making accurate testing of contact heat resistance essential for ensuring safety and compliance.
GT-C101 simulates real working conditions by measuring heat transfer delay and thermal transmission under instant contact with high-temperature surfaces. Fully compliant with EN 407, EN 702, and ISO 12127-1 standards, this machine provides precise, repeatable data for manufacturers, laboratories, and research institutions. With high-temperature capability up to 500°C, advanced calorimetry, digital monitoring, and adjustable contact speed, the Heat Contact Machine GT-C101 is an indispensable tool for developing and certifying next-generation PPE and heat-insulation materials.
Quick links
Products