'Specifications for Calibration of Paint Film Scratchers' for comments
On June 15, 2021, the National Geometry Engineering Parameter Metrology Technical Committee released the draft of the 'Calibration Specification for Paint Film Cutter' for comments, and is now seeking comments from members and relevant experts. The paint film scratcher is an appliance used to measure the adhesion of paints and paints on the sprayed surface. The tool cuts the coating film layer in a right-angle grid pattern and penetrates to the substrate, and evaluates the degree of adhesion of the coating film to the substrate by evaluating the integrity of the coating film within the grid. The cross-cut test of the paint film is widely used in the quality control test of the paint film of automobiles, home appliances, electronic products, and aluminum alloy materials. The cross-cut test requires the use of qualified cutting tools. However, there is currently no corresponding national metrological technical specification for the calibration of the paint film cross-cutting device, only the national standard GB/T 9286-1998 'Cross-cut test of paint and varnish paint film' and ISO 2409:2020 (E) 'Color The Paints and varnishes-Cross-cut test specifies some requirements for the shape and edge spacing of single- and multi-blade cutting knives in the cross-cut test, with no specific calibration method. Various domestic technical institutions have no measurement basis for the calibration of paint film scratchers, and there is no scientific, reasonable and easy-to-operate calibration method, and users urgently demand traceability. In recent years, the number of paint film cross-checkers submitted for inspection in various provinces and cities has increased significantly. In order to meet the customer's traceability requirements, some provincial and municipal metrology technical institutions have formulated corresponding local calibration specifications, but these local calibration standards are used to cross the paint film. The measurement characteristics and calibration methods proposed by the instrument are different. Therefore, it is of great significance to formulate the national calibration standards for paint film scratchers, to unify the calibration method of paint film scratchers nationwide, to meet the requirements of traceability of its value, and to ensure the accuracy and reliability of measurement data. JJF 1071-2010 'Rules for Compilation of National Metrology Calibration Specifications', JJF 1001-2011 'General Metrology Terms and Definitions', and JJF 1059.1-2012 'Measurement Uncertainty Evaluation and Representation' together constitute the basic series of specifications supporting the formulation of this calibration specification . The main reference standards of this specification are GB/T 9286-1998 'Cross-cut test of paints and varnishes' and ISO 2409:2020(E) 'Paints and varnishes-Cross-cut test' test). According to JJF 1071-2010 'Rules for the Compilation of National Metrology Calibration Specifications', the contents of this specification include scope, reference documents, terminology, overview, measurement characteristics, calibration conditions, calibration items and calibration methods, expression of calibration results, recalibration time interval and appendices, etc. content. This specification is formulated for the first time. This specification applies to the calibration of paint film scratchers for cross-cut testing of coatings.
The average consumer is always looking for ways to save money while finding out solutions, is designed for killing two birds with one stone, providing a perfect solution to textile testing equipment problems.
If you would like to learn more about , be sure to visit GESTER Instruments for more information!
Getting textile testing equipment from an idea to production is a complex process. It involves significant research, time, planning and patience. But with the right information, the right resources and the right product, it's possible.
GESTER International Co.,Limited is an expert in manufacturing a wide range of . We also have high quality tensile tester manufacturers and many others. Visit to know more.
Rewards and discount programs give customers more reason to come back for textile testing equipment again, especially in the competitive retail and services markets.
1. ISO 5402-1: Specifies the flexometer method for testing leather flex resistance under repeated bending.
2. ISO 17694: Defines test methods for footwear upper and lining flex resistance, simulating real-world bending stress to assess long-term durability.
C
Cut resistance is one of the most critical performance indicators in personal protective equipment (PPE) testing, directly affecting worker safety in high-risk industries such as metal processing, machinery manufacturing, and emergency rescue. The TDM Cut Test Machine GT-KC28 plays a vital role in accurately evaluating the cut resistance of PPE products, including gloves, protective clothing, footwear materials, composite materials, rubber, and industrial textiles.
By adopting high-precision force control systems, intelligent data processing, and stable transmission technology, the GT-KC28 TDM Cut Tester can accurately measure the critical cutting force of materials and ensure excellent repeatability and comparability of test results. Its user-friendly touch-screen operation, comprehensive data storage, USB data export, and built-in thermal printer greatly improve laboratory efficiency and data traceability.
The TDM Cut Test Machine GT-KC28 fully complies with major international and national standards such as ISO 13997, EN 388, ASTM F2992/F2992M, ANSI/ISEA 105, and GB 24541-2022, making it a reliable solution for PPE manufacturers, third-party testing laboratories, and research institutions. Through precise and standardized cut resistance testing, the GT-KC28 helps reduce industrial cutting injuries, supports PPE certification across global markets, and ensures that protective equipment delivers reliable safety performance in real-world applications.
Quick links
Products