loading

PPE Testing Equipment Manufacturer | Safety Equipment Testing Machines | GESTER


Products

Technical Regulations and Standards on the Burning Performance of Textiles

Europe, America, Japan and other countries have long legislated the combustion performance of a series of textile products, including clothing fabrics, pajamas, children's pajamas, carpets, mattresses, curtains, etc., which require that they pass the combustion test before they can be produced and used; the United States The Consumer Product Safety Commission (CPSC) also legislates that all textiles used in high-rise buildings, aviation, shipping, hospital nursing homes, mass gathering places and flammable work areas must pass the flame resistance test. The following mainly introduces the corresponding technical regulations and standards of the United States, Canada, Japan, Europe and China. 1. The United States The United States passed the Flammable Fabric Act (FFA) as early as 1953, revised it in 1954 and 1967, and was enforced by the US Consumer Product Safety Commission (CPSC) (Table 2). Standards and regulations applicable to the scope of combustion performance technical requirements Remarks 16CFR1610 clothing textile flammability standard level 1: general flammability does not contain lint, soft hair, tufts and lint fabrics and other fabrics without raised fibers on the surface. The flame spread time is ≥3.5s. Can be used for clothing products. Fabrics containing pile, soft hair, tufts and lint, and other fabrics without raised fibers on the surface. The flame spreading time is more than 7s or the surface burning is relatively rapid (within 0-7s), but the flame intensity cannot ignite or melt the substrate of the fabric. Grade 2: Moderately flammable fabrics containing lint, soft wool, tufts and lint, and other fabrics without raised fibers on the surface. The flame spread time is 4~7s (including the burning and melting time of the basal tissue). It can be used in clothing products, but should be used with caution, because the flammability test results of textile fabrics will vary with the characteristics of the fabric. Grade 3: Fast and violent burning of fabrics that do not contain lint, soft wool, tufts and lint, and other fabrics that do not have raised fibers on the surface. The flame spreading time is less than 4s. Such fabrics are considered to be flammable and dangerous, and cannot be used in clothing products because of their rapid and violent burning. Fabrics containing pile, soft hair, tufts and lint, and other fabrics without raised fibers on the surface. The flame spreading time is less than 4s, and the flame intensity is sufficient to burn or melt the base tissue. 16CFR1615 Children's Pajamas Flammability Standard No. 0-6 Children's Pajamas and related materials. The average carbonization length of the 5 samples is less than or equal to 17.8cm (7”). The carbonization length of any of the 5 samples is less than or equal to 25.4cm (10”), that is, none of the samples can be completely burned. There is only one sampling method-conventional sampling method: a batch of 500 dozen. 16CFR1616 Flammability Standard for Children's Pajamas No. 0-6 Children's Pajamas and Related Materials, No. 7-14 Children's Pajamas and Related Materials. Two sampling methods: ①Conventional sampling method; ②Relaxed sampling method: 15 consecutive batches of qualified samples can be implemented with a relaxed sampling method: 1,000 dozen as a batch. 16CFR1630 Carpet and felt surface flammability standard carpets. The distance from the edge of the carbonized area of u200bu200ba single sample to any point on the edge of the metal frame (d20.3cm) is ≥2.54cm, then the sample is qualified; at least 7 of the 8 samples are the distance from the edge of the carbonized area to the edge of the metal frame >2.54cm, the carpet test is qualified. 16CFR1631 Small carpets and carpets surface flammability standard Small carpets: size ≤183cm, area ≤223m2. 16CFR1632 mattresses and mattresses flammability standards for various household mattresses, excluding those installed on vehicles Kind of mattress. If the carbonization length measured at the closest point to the cigarette in any direction on the surface of the mattress is ≤5.1cm, then the single cigarette test is partially qualified; generally 18 cigarettes are required to be lit for the test, and all parts of the test are qualified to qualify the mattress. 2. The Canadian regulations on textile flame retardancy are included in the dangerous goods laws and regulations, and Health Canada is responsible for sending inspectors to enforce them (Table 3). The scope of application of standards and regulations, combustion performance, technical requirements, hazardous products regulations, any flammable, toxic and other products that pose a threat to public health and safety, textiles and clothing also belong to the flat fabric of textile fiber products. Flame expansion time>3.5s. The surface is raised fabric. Flame expansion time> 4s. Children's pajamas, pillows, cots, cribs or other textiles used for sleep with size ≤14. Flame expansion time>7s. Hazardous Products (Children’s Pajamas) Regulations The average carbonization length of 5 samples of children’s pajamas is ≤178mm; the carbonization length of a maximum of 1 sample is equal to the overall length of the sample (254mm). Children's pajamas treated with flame retardant should be attached with a permanent label indicating the flame retardant, the cleaning process and the guarantee that the flame retardancy of the product will not be reduced after use. The Hazardous Products (Carpets) Regulations require that carpets have flammability warnings on their labels. Dangerous Products (Tent) Regulations. The damage length of the textile material floor material of the tent is ≤25mm; the continuous burning time of a single sample of the wall and ceiling materials is ≤4s, the average continuous burning time of the sample is ≤2s; the damage length of a single sample is ≤255mm , The average damage length of the sample varies according to the square meter weight of the sample and has a different specified range. The flame spread time of plush toys made of textile fiber materials in the Hazardous Products (Toys) Regulations is> 7s. If one of the five samples fails, another five samples will be tested. If two of the ten samples fail Qualified, the product is unqualified. Dangerous Products (Mattress) Regulations The length of carbonization or charring in any direction around the mattress cigarette is ≤50mm, and after the cigarette is extinguished, the sample continues to burn for ≤10min.

GESTER International Co.,Limited is specialized in sourcing tensile tester manufacturers textile testing equipment through its unparalleled worldwide network of supply. Go to GESTER Instruments, you will surely find your ideal at the most favorable price.

No, this isn't a wonder product and it won't be likely to change your life but it will give your tensile tester manufacturers a kick and bring the extraordinary to the every day. give it a shot at GESTER Instruments.

GESTER clearly and succinctly expresses what our company is all about. Strong brands cut through the noise to grab the audience and immediately shed light on the character of the product or service.

With the help of a tensile tester manufacturers textile testing equipment, tensile tester manufacturers becomes a reasonably easy job that you can take care of simply and swiftly.

GET IN TOUCH WITH Us
recommended articles
Safety Footwear Tester Guide ISO 20346 with Buying Tips
This guide explains the ISO 20346 standard for general-purpose protective footwear, differentiates it from related ISO standards, and shares core buying tips for qualified safety footwear testers. It also introduces professional multi-standard compliant testing equipment for footwear quality control and compliance verification.
What Are the ISTA Standard Tests and ISTA Testing Equipment?
ISTA (International Safe Transit Association) standard tests are globally recognized transportation packaging test procedures designed to evaluate the safety and reliability of products and their packaging throughout the logistics chain. By simulating real-world transportation conditions such as drops, vibration, impact, stacking, and compression, ISTA testing helps identify potential packaging weaknesses before products enter large-scale distribution. ISTA testing equipment—including drop testers, vibration testers, incline impact machines, and compression testers—plays a critical role in accurately reproducing these conditions under laboratory settings. Proper selection and use of ISTA-compliant equipment enable manufacturers to reduce transportation damage, lower return costs, enhance packaging design, and improve customer confidence in product quality and logistics safety.
Safety Footwear Test Explained: Compression and Puncture Tester
This article fully explains the working principle, applicable international standards, test advantages and application scope of safety footwear compression and puncture tester GT-KB12A. It covers core protective performance testing of safety shoe toecap and sole steel plate, complies with GB, ISO, EN, ASTM and other global standards, and serves manufacturers, third-party labs and safety footwear R&D institutions for quality control .
Whole Shoes Flexing Tester GT-KA01-2: An Ultimate Guide to Its Benefits and Applications
The Whole Shoes Flexing Tester GT-KA01-2 is an advanced footwear testing instrument designed to evaluate the flexing resistance and durability of finished shoes. By simulating repeated walking and bending movements, it helps manufacturers identify cracks, material fatigue, and structural weaknesses in footwear products. Compliant with SATRA TM92, ISO 24266 Method A, and HG/T 2871-2022 Method B, this testing machine provides accurate, repeatable, and reliable results for sports shoes, casual shoes, work shoes, and other footwear types. This guide explores its features, benefits, industry applications, and frequently asked questions to help footwear manufacturers improve product quality and meet international testing requirements.
 Fabric Pilling Test: How to Choose the Right ICI Pilling Box Tester GT-C18
Fabric pilling directly affects the appearance, durability, and perceived quality of textile products. With global textile brands enforcing stricter testing standards, reliable laboratory testing equipment has become essential for manufacturers. This article explores how fabric pilling tests are conducted and why textile laboratories increasingly invest in professional ICI pilling box testers such as the GT-C18. It explains the advantages of in-house testing, international compliance requirements, key machine components, and important parameters buyers should evaluate before purchasing a pilling tester. By selecting the right equipment, textile companies can achieve faster quality verification, reduce dependence on third-party laboratories, and ensure their fabrics consistently meet international market standards.
Top Features of a Certified TDM Cut Resistance Tester Supplier for Laboratory Use
The demand for precise PPE safety testing has surged with the evolution of protective gear, making TDM (Tomodynamometer) cut resistance testing a critical process for evaluating protective gloves and industrial textiles. This article details the top features of a certified TDM cut resistance tester supplier for laboratory use, including compliance with international standards (EN 388, ISO 13997, ASTM F2992), high-precision mechanical engineering, automated workflows, robust data management, and integrated safety features. It highlights GESTER International Co., Ltd.—a 20+ year experienced manufacturer with ISO 9001 certification and partnerships with SGS, Intertek, and TUV—as a leading supplier, offering the GT-KC28 TDM Cut Test Machine and comprehensive services (on-site installation, calibration, global technical support). For laboratories seeking reliable, standard-compliant testing solutions to validate PPE safety claims, this article provides actionable insights into strategic procurement. Visit https://www.gesterinstruments.com/ for more technical specifications and PPE testing solutions.
Why is TPP Testing Important for Firefighter Protective Clothing
TPP testing objectively evaluates the thermal protective performance of firefighter protective clothing under extreme radiant and convective heat. This article explains TPP testing principles, its role in meeting NFPA/ISO standards, and how advanced equipment like the GT-RC02 TPP tester helps ensure clothing reliability and firefighter safety.
Why GESTER is Recognized as a Global Top Safety Shoe Tester Exporter
As global industrial safety requirements tighten, GESTER International Co., Ltd has emerged as a globally recognized top safety shoe tester exporter, serving 168 countries with over 25 years of specialized expertise. The company’s success hinges on its commitment to precision engineering, compliance with international standards (ISO, ASTM, EN, SATRA), and partnerships with renowned testing institutes like SGS, Intertek, and TUV. Its product lineup, including the Safety Glove & Shoe Upper Cutting Tester GT-KC29 and cut resistance testers, delivers reliable, repeatable data for safety footwear durability, cut resistance, and other critical performance indicators. Complemented by a comprehensive global service network (on-site installation, calibration, staff training) and OEM/ODM customization capabilities, GESTER streamlines quality control for manufacturers, facilitating market access and ensuring workplace safety. Trusted by PPE brands and laboratories worldwide, GESTER bridges technical excellence and practical usability to drive efficiency in safety shoe certification and global trade.
What is EN 149 & Why is it Important?
EN 149 is the core European standard for particle-filtering half masks and FFP respirators. This article elaborates on the definition, structure, performance classification, marking rules and core advantages of EN 149, compares it with NIOSH N95, KN95, EN 143 and medical mask standards, and lists industry application scenarios, as well as professional mask and filter testing instruments compliant with EN 149 testing requirements.
Gloves Testing Equipment: Complete Buying Guide

Safety gloves are critical personal protective equipment (PPE) used in industries such as manufacturing, welding, construction, firefighting and chemical processing. To ensure reliable protection, gloves must undergo strict performance testing before entering the market.

Professional gloves testing equipment helps manufacturers evaluate important properties including cut resistance, thermal protection, contact heat resistance, tensile strength and impact protection. By selecting suitable testing machines, companies can improve product quality, meet international standards and reduce safety risks.

This complete buying guide introduces the main types of glove testing equipment, explains their applications and provides practical advice on choosing the right solution for your laboratory or production requirements.
GESTER International Co., Ltd. gains certificates of ISO 9001, 3A and SGS Audited supplier etc. with advanced design concept, excellent manufacturing technology and strict quality control.
WeChat
Contact us
Tel: +86-595-28886108 
Fax: +86-595-22515221
E-mail: sales10@gester-instruments.com,
                 info@gester-instruments.com
Mobile/Whatapp/ Wechat:  
             + 86(0)18059985379
Address:  No.15, Chifeng Road,Licheng Region, Quanzhou city of Fujian,PR China.
Customer service
detect