Tensile strength tester is often a problem? Maintenance didn't do it!
Tensile strength tester is often a problem? Maintenance didn't do it! 1 check whether there is a blind spot, load sensor: general metrological verification equipment 10% or even 20% of the maximum load for verification of the starting point, and a lot of bad quality of sensor error is below 10% or less great; 2, beam movement speed test: test the results obtained with different speeds is different also, so you need to calibrate the speed of the test verification; 3, host, improper material selection: if do large tonnage of metal test, because force all make itself produces deformation beams at the same time, and also affect the test results. So choose a good cast steel material is better, if it is cast iron material sometimes overwhelmed and direct fracture; 4, the installation of the displacement sensor location: because of the different design, installation location is different also, but the installation at the edge of the screw, will be more accurate than the installed on the machine; 5, detection of coaxial degree whether meet the requirements of standard production instrument, coaxial degree of accuracy if not enough, the experimental results deviation will be larger, especially for smaller values of the force test; 6, jig, long-term use, fixture jaw will be wear and tear will collapse tooth deformation, lead to clamping, or harm the sample, test results; 7, the influence of the synchronous belt or gear: if the machine in the production process is not enough attention, can accelerate the aging of the two parts, the life does not change in time will affect the result of the test; 8, safety protection device malfunction, the consequences may directly damage the instrument, haida engineers suggest users regularly check, some may also be caused because of software failure.
GESTER International Co.,Limited in the right situation can streamline the entire process, enabling your team to deliver higher quality work in a shorter amount of time.
We would like to offer our comprehensive service to our customers who interested in textile testing equipment.
The global market is estimated to reach a value of almost tensile tester manufacturers in the next decade. have a robust position in the tensile tester manufacturers market because of its proven high potency in tensile tester manufacturers.
A wholesaler should have many tensile tester manufacturers based products that could help you if you have a tensile tester manufacturers problem. It is better to treat the problem early rather than have to deal with it later. GESTER International Co.,Limited is your best choice.
The Heat Contact Machine GT-C101 is a specialized testing instrument designed for evaluating the heat resistance and thermal protective performance of gloves, protective clothing, and other heat-resistant materials used in high-temperature environments. In industries such as smelting, casting, welding, and glass manufacturing, workers are frequently exposed to intense heat, making accurate testing of contact heat resistance essential for ensuring safety and compliance.
GT-C101 simulates real working conditions by measuring heat transfer delay and thermal transmission under instant contact with high-temperature surfaces. Fully compliant with EN 407, EN 702, and ISO 12127-1 standards, this machine provides precise, repeatable data for manufacturers, laboratories, and research institutions. With high-temperature capability up to 500°C, advanced calorimetry, digital monitoring, and adjustable contact speed, the Heat Contact Machine GT-C101 is an indispensable tool for developing and certifying next-generation PPE and heat-insulation materials.
Quick links
Products