loading

GESTER PPE Testing Equipment | Professional Safety Footwear Testing Equipment, Glove Testing Equipment, Protective Clothing Testing Equipment


Products

The third batch of enterprise state key laboratories declaration work started

Transferred from China Science and Technology Network. The Ministry of Science and Technology has established 99 state key laboratories for enterprises, which have played an important role in enhancing the independent innovation capabilities of enterprises, leading and driving the technological progress of the industry, and promoting the construction of the national technological innovation system. It has also played an important role in the scientific and technological circles and the industrial circles. influences. Recently, the third batch of enterprise state key laboratories declaration work started. It is reported that the construction of the third batch of corporate state key laboratories focuses on 16 strategic emerging industries and several important industries such as energy conservation and environmental protection, new generation information technology, biology, high-end equipment manufacturing, new energy, new materials, new energy vehicles, etc. direction. The application requirements clearly require that the laboratory supporting unit must be an enterprise with legal personality registered in China (excluding Hong Kong, Macao, and Taiwan), and the Ru0026D investment is relatively large. The total Ru0026D expenses in the past three fiscal years account for sales In principle, the proportion of total income shall not be less than 4%. The laboratory has been engaged in applied basic research and pre-competitive common technology research in this field for more than 5 years, has mastered the core technology of the industry, has independent intellectual property rights, and has the ability to undertake major national scientific research tasks and participate in international competition. In principle, the laboratory should be a department or local provincial and ministerial key laboratory that has been in operation for more than 2 years, with relatively concentrated research directions and a standardized and effective management and operation system. The laboratory must have a high-level scientific research team with a reasonable age and knowledge structure, with no less than 50 full-time scientific researchers, and no less than one-third of the scientific researchers with associate senior technical titles or above. In addition, the laboratory area should generally be more than 5,000 square meters, and the total value of scientific research conditions and facilities should exceed 30 million yuan. The competent department and the supporting unit can guarantee to provide the enterprise's state key laboratory construction and operation funds. Article Source:

GET IN TOUCH WITH Us
recommended articles
Bally Leather Flexing Tester GT-KC10A Assembly Guide
This comprehensive guide provides detailed instructions for the proper assembly, calibration, and operation of the Bally Leather Flexing Tester GT-KC10A. Essential for quality control labs, it ensures accurate testing of flex resistance in leather, coated fabrics, and textiles used in footwear uppers, helping to prevent material failure.
How to Find a Professional Safety Glove Testing Machine Manufacturer with CE Certification?
With the global PPE market’s rapid growth, choosing a professional CE-certified safety glove testing machine manufacturer is critical for data integrity and international compliance. This article explains why CE certification is non-negotiable (ensuring EU safety/quality standards), outlines essential test items (abrasion, cut, thermal protection per EN 388/EN 407), highlights core instruments (GESTER GT-KC28 TDM Cut Tester, GT-KC29 Cutting Tester, GT-C101 Heat Contact Machine), and details how to evaluate suppliers (20+ years of experience, partnerships with SGS/Bureau Veritas, ISO 9001 certification, after-sales support). It also covers the benefits of OEM/ODM capabilities for customized solutions. Ultimately, partnering with trusted manufacturers like GESTER ensures high-precision, compliant testing to protect workers and meet global market requirements.
What Are the Types of Color Fastness Testing for Fabrics?
Color fastness testing evaluates how well fabrics resist fading or bleeding under conditions like washing, rubbing, light exposure, and perspiration. Key tests include rubbing fastness, washing fastness, light fastness, perspiration fastness, and sublimation fastness. These tests ensure textiles maintain color integrity, prevent health risks, and meet quality standards. Learn about different testing methods and equipment used in the textile industry.
Why TDM Cut Test Machine GT-KC28 Is Needed in PPE Testing

Cut resistance is one of the most critical performance indicators in personal protective equipment (PPE) testing, directly affecting worker safety in high-risk industries such as metal processing, machinery manufacturing, and emergency rescue. The TDM Cut Test Machine GT-KC28 plays a vital role in accurately evaluating the cut resistance of PPE products, including gloves, protective clothing, footwear materials, composite materials, rubber, and industrial textiles.

By adopting high-precision force control systems, intelligent data processing, and stable transmission technology, the GT-KC28 TDM Cut Tester can accurately measure the critical cutting force of materials and ensure excellent repeatability and comparability of test results. Its user-friendly touch-screen operation, comprehensive data storage, USB data export, and built-in thermal printer greatly improve laboratory efficiency and data traceability.

The TDM Cut Test Machine GT-KC28 fully complies with major international and national standards such as ISO 13997, EN 388, ASTM F2992/F2992M, ANSI/ISEA 105, and GB 24541-2022, making it a reliable solution for PPE manufacturers, third-party testing laboratories, and research institutions. Through precise and standardized cut resistance testing, the GT-KC28 helps reduce industrial cutting injuries, supports PPE certification across global markets, and ensures that protective equipment delivers reliable safety performance in real-world applications.
ISO 20344 Tester – Tested by ISO 20344 Standard
EN ISO 20344 is the core international test method standard for full-performance detection of safety footwear. This article systematically explains the full range of whole-shoe test items covered by the ISO 20344 standard, analyzes the core practical advantages of mandatory ISO 20344 testing for factories and laboratories, and matches a complete set of dedicated ISO 20344 testers one by one. It also sorts out mainstream associated safety footwear standards worldwide, providing one-stop standardized testing solutions for safety footwear manufacturers, third-party testing institutions and occupational safety supervision departments.
Top Features of a Certified TDM Cut Resistance Tester Supplier for Laboratory Use
The demand for precise PPE safety testing has surged with the evolution of protective gear, making TDM (Tomodynamometer) cut resistance testing a critical process for evaluating protective gloves and industrial textiles. This article details the top features of a certified TDM cut resistance tester supplier for laboratory use, including compliance with international standards (EN 388, ISO 13997, ASTM F2992), high-precision mechanical engineering, automated workflows, robust data management, and integrated safety features. It highlights GESTER International Co., Ltd.—a 20+ year experienced manufacturer with ISO 9001 certification and partnerships with SGS, Intertek, and TUV—as a leading supplier, offering the GT-KC28 TDM Cut Test Machine and comprehensive services (on-site installation, calibration, global technical support). For laboratories seeking reliable, standard-compliant testing solutions to validate PPE safety claims, this article provides actionable insights into strategic procurement. Visit https://www.gesterinstruments.com/ for more technical specifications and PPE testing solutions.
Why is TPP Testing Important for Firefighter Protective Clothing
TPP testing objectively evaluates the thermal protective performance of firefighter protective clothing under extreme radiant and convective heat. This article explains TPP testing principles, its role in meeting NFPA/ISO standards, and how advanced equipment like the GT-RC02 TPP tester helps ensure clothing reliability and firefighter safety.
Why GESTER Ranks as a Leading TPP Thermal Protective Performance Tester Exporter
As a trusted leading TPP Thermal Protective Performance Tester exporter, GESTER International Co., Ltd. brings 25+ years of R&D and manufacturing expertise to PPE safety testing. Our flagship GT-RC02 series TPP testers feature advanced dual-source thermal simulation, high-sensitivity sensors, and full digital automation—delivering precise, repeatable data to evaluate thermal protection for firefighter and industrial protective clothing. Fully compliant with global standards (NFPA 1971, EN 469, ISO), GESTER’s equipment is trusted by SGS, Intertek, and top testing institutes worldwide. Backed by ISO 9001 certification, global service in 160+ countries, and professional calibration support, we empower manufacturers and labs to meet stringent safety regulations and ensure life-saving thermal protection. Discover tailored TPP testing solutions for PPE excellence at GESTER.
 Fabric Pilling Test: How to Choose the Right ICI Pilling Box Tester GT-C18
Fabric pilling directly affects the appearance, durability, and perceived quality of textile products. With global textile brands enforcing stricter testing standards, reliable laboratory testing equipment has become essential for manufacturers. This article explores how fabric pilling tests are conducted and why textile laboratories increasingly invest in professional ICI pilling box testers such as the GT-C18. It explains the advantages of in-house testing, international compliance requirements, key machine components, and important parameters buyers should evaluate before purchasing a pilling tester. By selecting the right equipment, textile companies can achieve faster quality verification, reduce dependence on third-party laboratories, and ensure their fabrics consistently meet international market standards.
What is the Use of Air Permeability Tester?
An air permeability tester measures how easily air passes through textiles, nonwovens, and other materials, directly impacting comfort (heat/moisture management) and performance (wind resistance, filtration). This guide explains how digital testers work using pressurized airflow, details step-by-step testing procedures (including nozzle selection), and covers key applications in apparel, medical, automotive, and industrial sectors. Explore compliant standards (ISO 9237, ASTM D737, GB/T 5453) and
Quanzhou Gester International Co.,Ltd gains certificates of ISO 9001, 3A and SGS Audited supplier etc. with advanced design concept, excellent manufacturing technology and strict quality control.
WeChat
Contact us
Tel: +86-595-28886108 
Fax: +86-595-22515221
E-mail: sales10@gester-instruments.com,
                 info@gester-instruments.com
Mobile/Whatapp/ Wechat:  
             + 86(0)18059985379
Address:  Block 402,4th floor, f buliding, shengfulan business Center, no.577 jitai road, economic and  Technological development zone quanzhou of fujian.China.
Customer service
detect