loading

PPE Testing Equipment Manufacturer | Safety Equipment Testing Machines | GESTER


Products

Under the issue of international trade, Vietnamese fishermen benefit!

According to CNBC reports, the trade dispute between Washington and Beijing has been around for more than a year. Economists at Nomura have found evidence that the United States and China have reduced imports of certain goods from each other in order to avoid raising tariffs. The same product is being sourced elsewhere. Nomura Securities said that so far, Vietnam has become the biggest beneficiary of the transfer of trade flows. According to estimates, these new purchases account for an estimated 7.9% of its GDP. At the same time, with the tit-for-tat tariff hikes between China and the United States, the cost of mutual imports has also increased. Because some exporters in the United States and China may be willing to absorb some of the additional tariff costs, some multinational companies may choose to re-produce. But trade data show that over time, the final reaction may be--trade diversion. So far, the United States has imposed 25% tariffs on US$250 billion of Chinese goods, and US President Trump has threatened to impose the same high tariffs on remaining imports from China, worth about US$300 billion. In retaliation, Beijing has also raised tariffs on billions of dollars worth of American goods. Nomura said that in addition to Vietnam, the other major beneficiaries of the Sino-US trade war are Taiwan, Chile, Malaysia and Argentina. Vietnam and Taiwan mainly benefited from additional exports to the United States, while Chile and Malaysia benefited by exporting more goods to China.

GET IN TOUCH WITH Us
recommended articles
ISO 20344 Tester – Tested by ISO 20344 Standard
EN ISO 20344 is the core international test method standard for full-performance detection of safety footwear. This article systematically explains the full range of whole-shoe test items covered by the ISO 20344 standard, analyzes the core practical advantages of mandatory ISO 20344 testing for factories and laboratories, and matches a complete set of dedicated ISO 20344 testers one by one. It also sorts out mainstream associated safety footwear standards worldwide, providing one-stop standardized testing solutions for safety footwear manufacturers, third-party testing institutions and occupational safety supervision departments.
 Fabric Pilling Test: How to Choose the Right ICI Pilling Box Tester GT-C18
Fabric pilling directly affects the appearance, durability, and perceived quality of textile products. With global textile brands enforcing stricter testing standards, reliable laboratory testing equipment has become essential for manufacturers. This article explores how fabric pilling tests are conducted and why textile laboratories increasingly invest in professional ICI pilling box testers such as the GT-C18. It explains the advantages of in-house testing, international compliance requirements, key machine components, and important parameters buyers should evaluate before purchasing a pilling tester. By selecting the right equipment, textile companies can achieve faster quality verification, reduce dependence on third-party laboratories, and ensure their fabrics consistently meet international market standards.
What is the Safety Glove & Shoe Upper Cutting Tester GT-KC29
The Safety Glove & Shoe Upper Cutting Tester GT-KC29 is a high-precision testing instrument developed to measure the cut resistance performance of safety gloves and footwear uppers. In industrial and construction environments where sharp tools and metal edges pose significant injury risks, the GT-KC29 provides a reliable evaluation method by simulating real cutting motion. This tester meets EN 388 section 6.2, ISO 20344:2021 section 5.23, GB/T 20991 section 6.14, and other global standards, making it essential for PPE manufacturers, testing laboratories, and quality control departments. With automated operation, high repeatability, and multi-standard compliance, it helps companies improve product safety levels, enhance global competitiveness, and ensure superior protection for end users.
EN ISO 20345 Safety Footwear Standard — How to Choose the ISO 20345 Tester
EN ISO 20345 is the core international standard for general-purpose safety footwear, defining minimum performance requirements for foot protection against various workplace hazards. This article elaborates on the definition, key highlights and mainstream safety classes of the EN ISO 20345 standard, covering applicable industry scenarios. It further provides a systematic step-by-step guide for selecting qualified ISO 20345 testing equipment, involving test item confirmation, equipment performance evaluation and reliable supplier selection. Finally, it introduces professional ISO 20345-compliant testing solutions provided by GESTER for footwear manufacturers and third-party testing institutions.
Safety Footwear Test Explained: Compression and Puncture Tester
This article fully explains the working principle, applicable international standards, test advantages and application scope of safety footwear compression and puncture tester GT-KB12A. It covers core protective performance testing of safety shoe toecap and sole steel plate, complies with GB, ISO, EN, ASTM and other global standards, and serves manufacturers, third-party labs and safety footwear R&D institutions for quality control .
PPE Testing Equipment Standards: Complete Guide to ISO, EN and ASTM Requirements

Personal protective equipment must meet specific performance requirements before it can be used in demanding workplace environments. ISO, EN, and ASTM standards provide important test methods and performance requirements for different PPE categories. However, the applicable standard depends on the product, intended application, target market, and specific protection requirements.

This guide explains the role of ISO, EN, and ASTM standards in PPE testing and introduces common requirements for safety footwear, protective gloves, protective clothing, masks, and safety helmets. It also explains how laboratories can select suitable PPE testing equipment according to the applicable test method.
PPE Testing Equipment: Complete Guide to Personal Protective Equipment Testing
PPE Testing Equipment is used to evaluate the safety, durability, and protective performance of personal protective equipment under controlled test conditions. This complete guide covers five major PPE testing categories: Safety Footwear Testing Equipment, Glove Testing Equipment, Protective Clothing Testing Equipment, Mask Testing Equipment, and Safety Helmet Testing Equipment. Learn about common PPE test methods, applicable standards, equipment types, laboratory requirements, and key factors to consider when selecting PPE Test Equipment for quality control, product development, certification, and laboratory applications.
Universal Testing Machine Dual Column GT-K01: A Reliable Solution for footwear Testing
The Universal Testing Machine Dual Column GT-K01 is a high-precision mechanical testing instrument widely used in the footwear industry to evaluate tensile, compression, bending, tearing, and bonding strength of various materials. With advanced servo control, high-accuracy displacement measurement, and compliance with multiple international testing standards such as SATRA, ASTM, ISO, and BS, the GT-K01 footwear universal testing machine provides reliable data for quality control, material research, and product certification. This article explores the working capabilities, structural features, and practical value of the GT-K01 universal testing machine in footwear testing and manufacturing processes.
How to Choose the Right DIN Abrasion Tester
This article provides a comprehensive guide to selecting the right DIN Abrasion Tester for material wear performance evaluation. It covers the instrument's function, applicable standards (including ISO 20344, DIN-53516, ISO 4649, ASTM D5963), key features like digital counter and auto-stop, application scope for rubber, tires, shoe soles, and conveyor belts, as well as quality, construction, brand considerations, and FAQs on troubleshooting. Ideal for laboratories, quality inspection departments, and material research institutions.
PPE Trends: Insights from a China Top PPE Testing Machine Company
As 2026 approaches, the global PPE industry is transformed by stricter industrial safety regulations, healthcare awareness, and evolving international standards (ISO/ASTM/EN). Key trends include the rise of Smart PPE, adoption of sustainable bio-based materials, and converging global compliance requirements—demanding high-precision, automated testing equipment with data traceability. GESTER International Co., Ltd., a China top PPE testing machine company with 25+ years of expertise, addresses these challenges through modular, standards-aligned solutions (e.g., TPP Thermal Protection Tester GT-RC02A, TDM Cut Test Machine GT-KC28) and long-term partnerships with SGS, TUV, and Intertek. Offering global technical support (installation, calibration, training) and automated, multi-standard-compatible equipment, GESTER empowers PPE manufacturers to meet 2026’s rigorous safety benchmarks. This article explores PPE performance evolution, 2026 industry trends, technological testing responses, and strategic procurement tips—emphasizing how China’s leading testing machine providers bridge hardware innovation with global compliance to protect human life. For professional PPE testing solutions, visit https://www.gesterinstruments.com/.
GESTER International Co., Ltd. gains certificates of ISO 9001, 3A and SGS Audited supplier etc. with advanced design concept, excellent manufacturing technology and strict quality control.
WeChat
Contact us
Tel: +86-595-28886108 
Fax: +86-595-22515221
E-mail: sales10@gester-instruments.com,
                 info@gester-instruments.com
Mobile/Whatapp/ Wechat:  
             + 86(0)18059985379
Address:  No.15, Chifeng Road,Licheng Region, Quanzhou city of Fujian,PR China.
Customer service
detect