UV aging tester plays an important role in the LED industry
Ultraviolet aging test machine is to carry out accelerated aging life test, the purpose is to improve environmental stress (such as temperature) and working stress (voltage and load applied to the product), speed up the test process and shorten the life test time of the product or system, (Hong Kong) Co., Ltd. is a manufacturer, and customers in need are welcome to inquire. It plays an important role in the LED industry. The UV aging tester is mainly used to test the moisture capacity of semiconductor packages. Products to be tested are tested under stringent temperature, humidity and pressure. Moisture will penetrate into the package along the interface between the colloid or the colloid and the wireframe. It is widely used in the sealing performance test of circuit boards, multilayer circuit boards, ICs, LCDs, magnets and other products to test the pressure resistance and air tightness of their products. Imported microcomputer is used to control the saturated steam temperature, and the microcomputer automatically calculates the saturated steam temperature. It is precisely designed with good air tightness and low water consumption. 200H of water can be added continuously each time. The higher the internal pressure, and the higher the internal pressure, there will be back pressure on the box door, which will make it tightly bonded to the box body. It is completely different from the traditional extrusion type and can prolong the service life. The integrated molded silicone door gasket has good air tightness and long service life. When producing LED lamps, the quality of LED lamps must be strictly controlled. The function of UV aging tester is an important part of the aging test of LED lamps. After the LED light is made, there will be problems such as flickering, dark light, and no light, which will make the service life less than expected and affect the quality of users. To prevent damage to LED lamps during production, manufacturers must perform burn-in tests using burn-in test boxes before assembling the lamps. Burn-in test is an important link to ensure the reliability of electronic products and an important step to improve product quality. Burn-in test is at the expense of the life of a single product, but on the premise of winning the reputation of customers, it is the guarantee of the quality of LED products. 1. It has the function of automatically adding water and replenishing water when the water level is too low during the test process; 2. The test process will automatically run to completion, and it is easy to use; 3. Temperature control of the aging machine: LED digital temperature controller can be set, controlled and display the exact test temperature. 4. Aging machine timer: LED digital timer, when the temperature in the pot reaches, the timer will start to ensure the test is completed. Main parameters: 1. Eight 40-watt UV fluorescent lamps; 2. Radiation uniformity: covering 4% of the entire sample surface; 3. Irradiance: Low: 0.35W/m2 (UVA, UVB); High: 1.55W/ m2(UVA), 1.23W/m2(UVB); 4. Ultraviolet wavelength: 290nm～400nm; 5. Test time: 0～9990H adjustable; 6. Blackboard temperature range: UV stage–BPT35-80°C(95-176°F); condensation stage–BPT35-60°C(95-140°F); 7. Sample capacity: 48 + BPT on 24 sample clips; 8. Spray water pressure: 25-40psi (1.7-2.7bar), purity: less than 1ppm dissolved solids, silicon: less than 0.1ppm, Conductivity: less than 5us/cm or 200 kΩ; 9. Condensed water requirements: pressure: 2-60psi (0.1-4.1bra); purity: deionized water, but not required.
To that end, GESTER International Co.,Limited has successfully built a solid foundation and infrastructure for textile testing equipment manufacturing.
GESTER International Co.,Limited also values the time, skills, and expert opinions of our staff. We are committed to providing fair and living wages, reasonable, structured work schedules, and clear duties and spheres of rights and responsibilities for each team member.
Overall, textile testing equipment may be a great way for manufacturers to expand their use of technology, but the price could present a significant hurdle for some businesses.
If GESTER International Co.,Limited added selling plans, offered more textile testing equipment, and increased service regions, it would suit the needs of more users.
tensile tester manufacturers textile testing equipment will help keep your tensile tester manufacturers in a tensile tester manufacturers state.
The Heat Contact Machine GT-C101 is a specialized testing instrument designed for evaluating the heat resistance and thermal protective performance of gloves, protective clothing, and other heat-resistant materials used in high-temperature environments. In industries such as smelting, casting, welding, and glass manufacturing, workers are frequently exposed to intense heat, making accurate testing of contact heat resistance essential for ensuring safety and compliance.
GT-C101 simulates real working conditions by measuring heat transfer delay and thermal transmission under instant contact with high-temperature surfaces. Fully compliant with EN 407, EN 702, and ISO 12127-1 standards, this machine provides precise, repeatable data for manufacturers, laboratories, and research institutions. With high-temperature capability up to 500°C, advanced calorimetry, digital monitoring, and adjustable contact speed, the Heat Contact Machine GT-C101 is an indispensable tool for developing and certifying next-generation PPE and heat-insulation materials.
Quick links
Products