Zipper load pull test machine test method
Zipper load pull test machine test method
The zipper load pull test machine can be used to test whether it can withstand a specified number of reciprocating pulling operations under the action of lateral and longitudinal tension. During the test, the machine drives the slider of the zipper at a constant speed, and does 30 reciprocating movements per minute until until the specified number of times.
Technical parameters:
1. Reciprocating times: 30 times/min
2. Reciprocating stroke: 75 mm
3. Clamp size: horizontal width 25 mm, vertical width 10 mm, pitch 1.5 mm, tooth tip width 0.2 m
4. Two clamping devices Distance: 6.35 mm
5. Total weight of longitudinal clamping device: 0.28- 0.34 kg
6. Specimen opening angle: 60°
7. Specimen meshing angle: 30°
8. Counter: 0- 999,999
9. Power supply: AC220V, 50Hz, 80 W
10. Dimensions: 480×370×960 mm (L×W×H)
11. Weight: 60 kg
Test method:
(1) Test the upper stop strength of the zipper teeth interlock, pull the slider to the upper end stop, and pull the slider, at this time, the upper stop strength of the zipper can be measured, This is to simulate the ability of the zipper to resist external force when the zipper is in the gripping state, when the slider is pulled over the top stop or the top stop is moved from the rib.
(2) Test the locking strength of the slider The slider is self-locked in the middle of the connecting teeth, and the zipper teeth are divided into left and right parts, and the zipper of the left and right parts can be stretched to test the locking strength and the resistance of the internal components of the slider.
(3) The zipper test of the bottom stop strength Pull the slider to the lower end stop, and the pull teeth are divided into left and right parts. Pulling the left and right sides of the chain teeth can measure the force required for the bottom stop to be damaged, as well as measure the slider. Resistance of internal components.
(4) Test of flat pull strength Flat pull strength is the most basic strength index. It is used to test the ability of zipper teeth to resist lateral force in an interlocked state, which is very similar to the actual use state.
(5) Test of the binding strength of the slider and the slider Apply the force of the slider in the direction perpendicular to the slider until the slider is separated from the slider, and the value recorded at this time is the binding strength of the slider and the slider.
(6) Test of open-end flat pull strength Test the resistance of the open-end zipper cannula and socket against external force damage. The fixtures are respectively fixed on the left and right sides of the open-end. When the zipper is closed, start the machine.
1. Slide Fasteners Reciprocating Tester Zipper Testing Machine GT-C39A
It is used to do a variety of zipper reciprocating tests, by testing in a continuous back and forth action. The ultimate aim is to test the zipper to create a distance between joints, loose or connector failure, fluff, wear, etc.
2. Zipper Rotation Test Machine GT-C39B
zipper testing machine: to test the torsional strength of variety types of zipper pullers. Zipper Rotation Testing methods: twist off, constant angle, constant load.
The point for GESTER International Co.,Limited is that managerial processes are as important as other inputs in production and can create significant competitive advantage.
is making its name in professional tensile tester manufacturers all over the world, and with GESTER International Co.,Limited taking great care to make an excellent product & actively involved in keeping the industry well-regulated, it's a product that should make its way into your tensile tester manufacturers.
A
Safety gloves are critical personal protective equipment (PPE) used in industries such as manufacturing, welding, construction, firefighting and chemical processing. To ensure reliable protection, gloves must undergo strict performance testing before entering the market.
Professional gloves testing equipment helps manufacturers evaluate important properties including cut resistance, thermal protection, contact heat resistance, tensile strength and impact protection. By selecting suitable testing machines, companies can improve product quality, meet international standards and reduce safety risks.
This complete buying guide introduces the main types of glove testing equipment, explains their applications and provides practical advice on choosing the right solution for your laboratory or production requirements.
Choosing the right abrasion testing equipment is essential for obtaining accurate and repeatable wear resistance results. DIN Abrasion Tester and Taber Abrasion Tester are two widely used abrasion testing machines, but they are designed for different material types and testing purposes.
This article provides a detailed comparison between DIN Abrasion Tester and Taber Abraser, covering their working principles, specimen requirements, industry applications, standard compliance, technical characteristics, operation features and practical advantages. DIN Abrasion Tester is mainly designed for rubber, elastic materials, tires, conveyor belts and footwear soles, while Taber Abrasion Tester is suitable for flat materials such as coatings, textiles, plastics, leather, metals and decorative surfaces.
By understanding the differences between these two abrasion testing methods, laboratories can select the most suitable abrasion tester based on sample geometry, testing standards and production quality control requirements.
Cut resistance is one of the most critical performance indicators in personal protective equipment (PPE) testing, directly affecting worker safety in high-risk industries such as metal processing, machinery manufacturing, and emergency rescue. The TDM Cut Test Machine GT-KC28 plays a vital role in accurately evaluating the cut resistance of PPE products, including gloves, protective clothing, footwear materials, composite materials, rubber, and industrial textiles.
By adopting high-precision force control systems, intelligent data processing, and stable transmission technology, the GT-KC28 TDM Cut Tester can accurately measure the critical cutting force of materials and ensure excellent repeatability and comparability of test results. Its user-friendly touch-screen operation, comprehensive data storage, USB data export, and built-in thermal printer greatly improve laboratory efficiency and data traceability.
The TDM Cut Test Machine GT-KC28 fully complies with major international and national standards such as ISO 13997, EN 388, ASTM F2992/F2992M, ANSI/ISEA 105, and GB 24541-2022, making it a reliable solution for PPE manufacturers, third-party testing laboratories, and research institutions. Through precise and standardized cut resistance testing, the GT-KC28 helps reduce industrial cutting injuries, supports PPE certification across global markets, and ensures that protective equipment delivers reliable safety performance in real-world applications.
Quick links
Products