loading

PPE Testing Equipment Manufacturer | Safety Equipment Testing Machines | GESTER


Products

At the beginning of the year, the air pollution protection tax was levied, and the VOC exhaust gas adsorption and recovery device achieved zero pollution

On the afternoon of the 29th, the 33rd meeting of the Standing Committee of the 12th Provincial People's Congress reviewed the 'Decision on the Applicable Tax Amount of Environmental Protection Tax on Air Pollutants and Water Pollutants in Hunan Province (Draft)'. According to the spirit of the draft decision, our province plans to levy environmental protection taxes on air pollutants and water pollutants from next year, and will no longer levy sewage charges. Among them, the applicable tax amount for taxable air pollutants is planned to be 2.4 yuan per pollution equivalent, and the applicable tax amount for taxable water pollutants is proposed to be 3 yuan per pollution equivalent. Shi Jianhui, director of the Provincial Department of Finance, introduced that the collection of environmental protection taxes on air pollutants and water pollutants is the specific implementation of the 'Environmental Protection Tax Law of the People's Republic of China' that will take effect on January 1 next year. The Environmental Protection Tax Law stipulates that the tax amount for air pollutants is 1.2 yuan to 12 yuan per pollution equivalent, and the tax amount for water pollutants is 1.4 yuan to 14 yuan per pollution equivalent, both of which are 10 times. Compared with the current pollution discharge fee collection standards of our province, the environmental protection tax standards for air pollutants and water pollutants proposed by our province are 100% higher for air pollutants and 114% higher for water pollutants. Compared with the specified maximum tax rate, it is still in its infancy, which not only takes into account the intensification of pollution control efforts, but also takes into account the burden borne by enterprises. It is understood that the task of improving environmental quality in our province is arduous and complex, and the air and water pollution is relatively serious. According to the calculations of experts organized by the Provincial Department of Finance, the Provincial Local Taxation Bureau and the Provincial Environmental Protection Department, the average treatment cost of air pollutants in our province is 1.76 yuan per pollution equivalent, and the average treatment cost of water pollutants is 2.85 yuan per pollution equivalent. It is obviously lower than the cost of pollution control by enterprises, which cannot motivate enterprises to actively control pollution. Therefore, in order to continuously improve the environmental quality of our province, it is necessary to appropriately raise the standard of environmental protection tax, and only if the environmental protection tax collected is higher than the cost of pollution control by enterprises, can enterprises be motivated to control pollution instead of directly discharging. At the same time, the Environmental Protection Tax Law stipulates that if the emission concentration value is lower than 30% of the prescribed standard, the tax will be reduced by 75%; if it is lower than 50%, the tax will be reduced by 50%. This regulation is more favorable than the original preferential policy of halving sewage charges. Most enterprises in key industries such as thermal power generation and cement in our province can complete emission reduction tasks and enjoy tax incentives, thus reducing the burden on enterprises. During the deliberation, the members of the Standing Committee of the Provincial People's Congress believed that the specific applicable tax amount for taxable air pollutants and water pollutants proposed by our province has taken into account the environmental carrying capacity of our province, the status quo of pollutant discharge and the requirements of economic, social and ecological development goals. It will help strengthen the binding force of taxation on pollutant discharge, and promote enterprises to establish and improve the pollutant discharge control mechanism. It is of great significance to protect and improve the environment, reduce pollutant discharge, and build a rich, beautiful and happy new Hunan. Related Links Environmental Protection Tax Taxpayers——Enterprises, institutions and other producers and operators that directly discharge taxable pollutants into the environment are taxpayers of environmental protection tax (enterprises, institutions and other producers and operators discharge taxable pollutants to the centralized sewage treatment and domestic garbage disposal sites established according to law. If the solid waste is stored or disposed of in a facility or place that meets the national and local environmental protection standards, it is not considered as a direct discharge of pollutants to the environment, and no environmental protection tax for the corresponding pollutants will be paid).​​——The legally established sites for the centralized treatment of urban and rural sewage and the centralized treatment of domestic wastes that discharge taxable pollutants into the environment in excess of the national and local discharge standards shall pay environmental protection tax.​​——Enterprises, institutions and other producers and operators that store or dispose of solid waste that do not meet the national and local environmental protection standards shall pay environmental protection tax. The VOC solvent recovery device turns the VOC into a liquid for separation and recycling. Environmental protection and saving, greatly reducing the pollution of exhaust gas to the atmosphere. Undertake the design, processing and manufacturing business of VOC waste gas adsorption and recovery device.

GET IN TOUCH WITH Us
recommended articles
Leather Physical Properties Testing Guide
This guide details the 9 critical physical property tests essential for assessing leather quality: Tensile Strength, Tear Strength, Abrasion Resistance, Thickness, Water Vapor Permeability, Water Resistance, Shrinkage Temperature, Color Fastness to Friction, and Bending Strength. It covers the testing scope (natural leather, synthetic leather, finished products, semi-finished goods) and introduces specialized testing equipment required for each method (e.g., Universal Testing Machine, Elmendorf
Understanding Universal Tensile Testing machine: Feature, Operation
Discover how universal testing machines perform tensile, compression, bending, and peel tests on metals, plastics, rubber, and composites. Features include servo motors, 0.001mm resolution, RS232 data, and safety systems. Step-by-step operation guide included.
PPE Trends: Insights from a China Top PPE Testing Machine Company
As 2026 approaches, the global PPE industry is transformed by stricter industrial safety regulations, healthcare awareness, and evolving international standards (ISO/ASTM/EN). Key trends include the rise of Smart PPE, adoption of sustainable bio-based materials, and converging global compliance requirements—demanding high-precision, automated testing equipment with data traceability. GESTER International Co., Ltd., a China top PPE testing machine company with 25+ years of expertise, addresses these challenges through modular, standards-aligned solutions (e.g., TPP Thermal Protection Tester GT-RC02A, TDM Cut Test Machine GT-KC28) and long-term partnerships with SGS, TUV, and Intertek. Offering global technical support (installation, calibration, training) and automated, multi-standard-compatible equipment, GESTER empowers PPE manufacturers to meet 2026’s rigorous safety benchmarks. This article explores PPE performance evolution, 2026 industry trends, technological testing responses, and strategic procurement tips—emphasizing how China’s leading testing machine providers bridge hardware innovation with global compliance to protect human life. For professional PPE testing solutions, visit https://www.gesterinstruments.com/.
According to ASTM D642 Standard: Detailed Box Compression Strength Tester GT-N02A
The ASTM D642 standard defines the test method for determining the compressive resistance of shipping containers, like corrugated boxes, when faced with static compressive forces. This article details the test procedure and introduces the GESTER GT-N02A and GT-N02B Box Compression Testers, which are fully compliant with ASTM D642, ISO 12048, and TAPPI T804. These versatile machines perform destructive strength tests, constant value tests, and simulated long-term stacking tests to ensure your pac
Top Features of a Certified TDM Cut Resistance Tester Supplier for Laboratory Use
The demand for precise PPE safety testing has surged with the evolution of protective gear, making TDM (Tomodynamometer) cut resistance testing a critical process for evaluating protective gloves and industrial textiles. This article details the top features of a certified TDM cut resistance tester supplier for laboratory use, including compliance with international standards (EN 388, ISO 13997, ASTM F2992), high-precision mechanical engineering, automated workflows, robust data management, and integrated safety features. It highlights GESTER International Co., Ltd.—a 20+ year experienced manufacturer with ISO 9001 certification and partnerships with SGS, Intertek, and TUV—as a leading supplier, offering the GT-KC28 TDM Cut Test Machine and comprehensive services (on-site installation, calibration, global technical support). For laboratories seeking reliable, standard-compliant testing solutions to validate PPE safety claims, this article provides actionable insights into strategic procurement. Visit https://www.gesterinstruments.com/ for more technical specifications and PPE testing solutions.
Analysis of Pilling Influencing Factors and Testing Methods
Pilling testing plays a vital role in textile quality control, helping manufacturers evaluate and improve the wear performance of fabrics. Through the use of advanced instruments like ICI Pilling Box Test Method (GT-C18) , Martindale Abrasion Test Method (GT-C13B) , and Random Tumble Pilling Test Method (GT-C19A) , laboratories can conduct precise and standardized assessments, ensuring that final textile products deliver superior appearance, comfort, and longevity.
Why GESTER Ranks as a Leading TPP Thermal Protective Performance Tester Exporter
As a trusted leading TPP Thermal Protective Performance Tester exporter, GESTER International Co., Ltd. brings 25+ years of R&D and manufacturing expertise to PPE safety testing. Our flagship GT-RC02 series TPP testers feature advanced dual-source thermal simulation, high-sensitivity sensors, and full digital automation—delivering precise, repeatable data to evaluate thermal protection for firefighter and industrial protective clothing. Fully compliant with global standards (NFPA 1971, EN 469, ISO), GESTER’s equipment is trusted by SGS, Intertek, and top testing institutes worldwide. Backed by ISO 9001 certification, global service in 160+ countries, and professional calibration support, we empower manufacturers and labs to meet stringent safety regulations and ensure life-saving thermal protection. Discover tailored TPP testing solutions for PPE excellence at GESTER.
Why Is Shoe Slip Resistance Tester Important for Footwear Safety?
Slip resistance is one of the most critical performance indicators for modern footwear, especially safety shoes used in industrial and high-risk working environments. Slip and fall accidents frequently occur on wet or smooth surfaces, posing serious risks to workers and consumers. To prevent such accidents and improve product safety, footwear manufacturers widely use professional testing equipment such as Shoe Slip Resistance Tester and Footwear Slip Testing Machine. These devices simulate real walking conditions to measure the coefficient of friction between the shoe sole and various surfaces. This article explores the working principle, features, applications, and industry significance of shoe slip safety tester, explaining why accurate slip resistance testing is essential for footwear safety, product development, quality control, and compliance with international standards.
What is EN 149 & Why is it Important?
EN 149 is the core European standard for particle-filtering half masks and FFP respirators. This article elaborates on the definition, structure, performance classification, marking rules and core advantages of EN 149, compares it with NIOSH N95, KN95, EN 143 and medical mask standards, and lists industry application scenarios, as well as professional mask and filter testing instruments compliant with EN 149 testing requirements.
Glove Tester: Key Standards EN 388 & EN 407
Protective glove testing is the core link to verify hand safety protection performance for industrial PPE. This article focuses on the two most authoritative EU mandatory standards EN 388 and EN 407, elaborates on standardized test necessity, complete test items, professional supporting glove testers, result rating rules, and the differences between mechanical risk testing and thermal risk testing. It provides one-stop compliant testing reference for glove manufacturers, third-party testing labs, and safety supervision institutions to meet global CE certification and workplace safety production requirements.
GESTER International Co., Ltd. gains certificates of ISO 9001, 3A and SGS Audited supplier etc. with advanced design concept, excellent manufacturing technology and strict quality control.
WeChat
Contact us
Tel: +86-595-28886108 
Fax: +86-595-22515221
E-mail: sales10@gester-instruments.com,
                 info@gester-instruments.com
Mobile/Whatapp/ Wechat:  
             + 86(0)18059985379
Address:  Block 402,4th floor, f buliding, shengfulan business Center, no.577 jitai road, economic and  Technological development zone quanzhou of fujian.China.
Customer service
detect