Brief introduction of fabric pilling test instrument
Test method (S): ASTM D 3512·ASTM D 49-70·ASTM D·3511·AATCC ASTM Area No.008 ASTM Standard Test Method 3512 Textile fabrics resistant to pilling and other related surface changes: (random roller pilling tester )S Random area Scope: A random area used for determining the formation of drug resistance and other related surface changes of textiles and pilling of textiles. Specimen 3 is laundered, and then the textile air-conditioning edge 3 4'X4' in atmospheric conditions is the square of deviations and the paper cut is allowed to dry and glue the sealed specimen to be placed in a 3 chamber and a gray cotton fiber (2) and original pilling Tumbled 30-minute specimens are watching the photographic device evaluation standard (ASTM adjd 3512) or in the building structure standard; ASTM D 4970, the standard test method for anti-pilling fabrics and other related surface changes: Martindale Apparatus Abrasion Tester Business Scope: Determine the resistance to form pellets and other related surface changes on the fabric with a Martindale apparatus* The specimens are washed 3 times and then the textile specimens under atmospheric conditions are mounted on the bottom table, and a Lissajous in the sample holder is used to perform a cycle. One cycle includes the operation of the machine shown in Figure 16 for 100 cycles. The evaluation can run up to 1000 cycles. The specimens in the 100-cycle evaluation interval are in the viewing device for the standard evaluation of photography (ASTM adjd 3512) or the standard sample clamping pressure of indoor fabrics is 3kPa* Note: This test method does not apply to fabrics with a thickness greater than 3mm (0.125.) Because such fabrics cannot be installed in the sample holder ASTM D 3511, the standard test method for anti-pilling fabrics and other related surface changes: (pilling tester) ) Brushing shot test business scope: a brush type pilling tester for fabrics to determine resistance to forming shots and other related surface changes. The condition of the sample is that 6 specimens of textiles under atmospheric conditions are cut into 9' x 9' squares, each time from the right, center, and left area of u200bu200bthe entire width of the specimen, the specimen is installed and brushed for 4 minutes, and then the specimen is installed on the surface and ran 2 specimens Standard evaluation of photography in observation equipment (ASTM adjd 3512) or standard AATCC, ASTM ts-008 for indoor fabrics, procedures for the appearance of clothing and other textiles after repeated washing AATCC approved gasket and dryerscope: evaluation of clothing and other after repeated washing The overall appearance specimens of textile products are washed 5 times, and then the textile specimens under atmospheric conditions are viewed in the standard evaluation device for photography (ASTM adjd 3512) or home textile standards and the original unlaundered control. More about textile instruments: http://www. standard-groups.com/TextileGarment/8.html
is frequently used by people in daily life since it can improve tensile tester manufacturers and tensile tester manufacturers.
Visit GESTER International Co.,Limited in China for professional textile testing equipment tips and qulity ensured . The company is a licensed, bonded, and insured provider with decades of experience. Make your enquiry, today.
First, in sparking the initial idea for a company based on manufacturing technology; and second, in designing a solution that could meet a clear market need for solving issues related to textile testing equipment tensile tester manufacturers.
GESTER International Co.,Limited has developed a unique technology with many applications including tensile tester manufacturers.
Personal protective equipment must meet specific performance requirements before it can be used in demanding workplace environments. ISO, EN, and ASTM standards provide important test methods and performance requirements for different PPE categories. However, the applicable standard depends on the product, intended application, target market, and specific protection requirements.
This guide explains the role of ISO, EN, and ASTM standards in PPE testing and introduces common requirements for safety footwear, protective gloves, protective clothing, masks, and safety helmets. It also explains how laboratories can select suitable PPE testing equipment according to the applicable test method.
Cut resistance is one of the most critical performance indicators in personal protective equipment (PPE) testing, directly affecting worker safety in high-risk industries such as metal processing, machinery manufacturing, and emergency rescue. The TDM Cut Test Machine GT-KC28 plays a vital role in accurately evaluating the cut resistance of PPE products, including gloves, protective clothing, footwear materials, composite materials, rubber, and industrial textiles.
By adopting high-precision force control systems, intelligent data processing, and stable transmission technology, the GT-KC28 TDM Cut Tester can accurately measure the critical cutting force of materials and ensure excellent repeatability and comparability of test results. Its user-friendly touch-screen operation, comprehensive data storage, USB data export, and built-in thermal printer greatly improve laboratory efficiency and data traceability.
The TDM Cut Test Machine GT-KC28 fully complies with major international and national standards such as ISO 13997, EN 388, ASTM F2992/F2992M, ANSI/ISEA 105, and GB 24541-2022, making it a reliable solution for PPE manufacturers, third-party testing laboratories, and research institutions. Through precise and standardized cut resistance testing, the GT-KC28 helps reduce industrial cutting injuries, supports PPE certification across global markets, and ensures that protective equipment delivers reliable safety performance in real-world applications.
Quick links
Products