Standard light source color light box operation instructions
It is a professional comprehensive supplier of material testing instruments and laboratory overall solutions. The main products are: standard light source box, color matching light box, standard light source matching color light box, evaluation light box, rating light box, color and color evaluation, display Micro and forensic inspection, 3d body scan and dummy simulation, mattress testing equipment, carpet testing equipment, toy testing equipment, humidity measurement&Control systems, accessories for soil temperature and humidity meters, textile and clothing, non-woven and geotextile testers, air permeability testers and other products. 1 Insert one end of the power cord into the socket on the back of the light box, and the other end into the power supply socket (note that the power supply must match the power indicated on the light box). At this time, the timing display will show a running time, indicating that the power is turned on. 2 Press the ON/OFF button once, and the timer will display the total time used by the light box. 3 Press the D65 button, the D65 lamp will light up, and the timer will display the time that the D65 lamp has been used. Press the F/A, TL84, CWF, U30 or UV button, the corresponding group of lamps will light up, and the timer will display the used time of this group of lamps. To turn on two or more light sources at the same time, just press two or more keys at the same time. 4. Place the tested items in the middle of the light box bottom plate. When comparing the colors of two or more items, do not overlap them for viewing, but place them side by side in the light box for comparison. 5 The viewing angle is 90°light source, 45°Line of sight is appropriate. As shown in the figure below, the light source illuminates the detected object from a vertical incident angle, and the observer starts from 45°Observed. 6 After the detection is completed, press the ON/OFF button to turn off the machine. Turn off the power after get off work or when not in use for a long time. 7 When replacing the new lamp, install it according to the arrangement position of the lamp or the mark on the lamp socket. Do not reverse the position of the different lamp. After replacing the lamp, the usage time of the new lamp should be reset. Light up the replaced lamp, insert a small screwdriver into the central hole of the CLR, and press this button (the timing of other lamps that are not lit will not be reset). Note: Do not use the CLR button when the lamp is not replaced, so as not to reset the timer time. 8 The standard light sources equipped with the light box are all installed in the fixed position of the light box, and the positions cannot be reversed. 9. The external power supply must have a grounding device to ensure safe use.
textile testing equipment is not something to be ignored or taken for granted. It is there to keep your tensile tester manufacturers comfortable year round. To find a cost effective solution, turn to GESTER International Co.,Limited.
If you would like a great tip on where you can get textile testing equipment tensile tester manufacturers for a great price, check out GESTER Instruments. GESTER International Co.,Limited is committed to serving globally recognized . Quality is guaranteed here. Make your wise decision.
The first step toward GESTER Instruments’s successful selling campaign is to understand your customers. What are their needs or desires? Why would they support your product? Even more importantly, why would they be passionate about your product?
In the boundless Chinese market, there are a number of enterprises that provides tensile tester manufacturers textile testing equipment of their own brand over the years, but few have won more support from customers on the international stage than GESTER Instruments.
GESTER International Co.,Limited can assure that it is one of the best products in the market at present.
Choosing the right abrasion testing equipment is essential for obtaining accurate and repeatable wear resistance results. DIN Abrasion Tester and Taber Abrasion Tester are two widely used abrasion testing machines, but they are designed for different material types and testing purposes.
This article provides a detailed comparison between DIN Abrasion Tester and Taber Abraser, covering their working principles, specimen requirements, industry applications, standard compliance, technical characteristics, operation features and practical advantages. DIN Abrasion Tester is mainly designed for rubber, elastic materials, tires, conveyor belts and footwear soles, while Taber Abrasion Tester is suitable for flat materials such as coatings, textiles, plastics, leather, metals and decorative surfaces.
By understanding the differences between these two abrasion testing methods, laboratories can select the most suitable abrasion tester based on sample geometry, testing standards and production quality control requirements.
Cut resistance is one of the most critical performance indicators in personal protective equipment (PPE) testing, directly affecting worker safety in high-risk industries such as metal processing, machinery manufacturing, and emergency rescue. The TDM Cut Test Machine GT-KC28 plays a vital role in accurately evaluating the cut resistance of PPE products, including gloves, protective clothing, footwear materials, composite materials, rubber, and industrial textiles.
By adopting high-precision force control systems, intelligent data processing, and stable transmission technology, the GT-KC28 TDM Cut Tester can accurately measure the critical cutting force of materials and ensure excellent repeatability and comparability of test results. Its user-friendly touch-screen operation, comprehensive data storage, USB data export, and built-in thermal printer greatly improve laboratory efficiency and data traceability.
The TDM Cut Test Machine GT-KC28 fully complies with major international and national standards such as ISO 13997, EN 388, ASTM F2992/F2992M, ANSI/ISEA 105, and GB 24541-2022, making it a reliable solution for PPE manufacturers, third-party testing laboratories, and research institutions. Through precise and standardized cut resistance testing, the GT-KC28 helps reduce industrial cutting injuries, supports PPE certification across global markets, and ensures that protective equipment delivers reliable safety performance in real-world applications.
Safety gloves are critical personal protective equipment (PPE) used in industries such as manufacturing, welding, construction, firefighting and chemical processing. To ensure reliable protection, gloves must undergo strict performance testing before entering the market.
Professional gloves testing equipment helps manufacturers evaluate important properties including cut resistance, thermal protection, contact heat resistance, tensile strength and impact protection. By selecting suitable testing machines, companies can improve product quality, meet international standards and reduce safety risks.
This complete buying guide introduces the main types of glove testing equipment, explains their applications and provides practical advice on choosing the right solution for your laboratory or production requirements.
Quick links
Products